• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4643-4648
• /
• 2010

In this study, $CO_2$ absorption properties at high pressure condition that can apply pre-combustion $CO_2$ capture were investigated for physical sorbent such as PEG, DMSO, and Sulfone. The $CO_2$ Solubility, regeneration, and initial absorption rate with temperature and pressure were measured using batch type stirred cell contactor. The PEG showed the highest $CO_2$ solubility and initial absorption rate. It can be found that all the physical sorbents used in this experiments were almost completely regenerated at various temperature and pressure.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.318-324
• /
• 2010

In this study, commercial pellet type sorbents for the collection of $CO_2$ from a local municipal waste incinerator were prepared and characterized in terms of adsorption efficiency by varying the operating conditions of a field process. The concentration of $CO_2$ in the flue gas ranged from 8 to 10%, which entered the test packed bed. As a result of this experiment, the sorbent procured from A-company, which is mainly composed of calcium compounds, showed the highest adsorption efficiency. The regeneration efficiency was fairly low, however. It also was found that based on adsorption breakthrough time, the relatively low flow rate of 10 LPM into the bed allowed higher collection efficiency. The higher flow rate of 40 LPM, on the other hand, tended to decrease the retention of the adsorption.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.391-396
• /
• 2016

The absorption efficiency of amine $CO_2$ absorbent (KoSol-5) developed by KEPCO research institute was evaluated using a 0.1 MW test bed. The performance of post-combustion technology to capture two tons of $CO_2$ per day from a slipstream of the flue gas from a 500 MW coal-fired power station was first confirmed in Korea. Also the analysis of the absorbent regeneration energy was conducted to suggest the reliable data for the KoSol-5 absorbent performance. And we tested energy reduction effects by improving the absorption tower inter-cooling system. Overall results showed that the $CO_2$ removal rate met the technical guideline ($CO_2$ removal rate : 90%) suggested by IEA-GHG. Also the regeneration energy of the KoSol-5 showed about $3.05GJ/tonCO_2$ which was about 25% reduction in the regeneration energy compared to that of using the commercial absorbent MEA (Monoethanolamine). Based on current experiments, the KoSol-5 absorbent showed high efficiency for $CO_2$ capture. It is expected that the application of KoSol-5 to commercial scale $CO_2$ capture plants could dramatically reduce $CO_2$ capture costs.

• Journal of Periodontal and Implant Science
• /
• v.29 no.3
• /
• pp.483-509
• /
• 1999

Biodegradable barrier membrane has been demonstrated to have guided bone regeneration capacity on the animal study. The purpose of this study is to evaluate the effects of cultured calvarial cell inoculated on the biodegradable barrier membrane for the regeneration of the artificial bone defect. In this experiment 35 Sprague-Dawley male rats(mean BW 150gm) were used. 30 rats were divided into 3 groups. In group I, defects were covered periosteum without membrane. In group II, defects were repaired using biodegradable barrier membrane. In group III, the defects were repaired using biodegradable barrier membrane seeded with cultured calvarial cell. Every surgical procedure were performed under the general anesthesia by using with intravenous injection of Pentobarbital sodium(30mg/Kg). After anesthesia, 5 rats were sacrificed by decapitation to obtain the calvaria for bone cell culture. Calvarial cells were cultured with Dulbecco's Modified Essential Medium contained with 10% Fetal Bovine Serum under the conventional conditions. The number of cell inoculated on the membrane were $1{\times}10^6$ Cells/ml. The membrane were inserted on the artificial bone defect after 3 days of culture. A single 3-mm diameter full-thickness artificial calvarial defect was made in each animal by using with bone trephine drill. After the every surgical intervention of animal, all of the animals were sacrificed at 1, 2, 3 weeks after surgery by using of perfusion technique. For obtaining histological section, tissues were fixed in 2.5% Glutaraldehyde (0.1M cacodylate buffer, pH 7.2) and Karnovsky's fixative solution, and decalcified with 0.1M disodium ethylene diaminetetraacetate for 3 weeks. Tissue embeding was performed in paraffin and cut parallel to the surface of calvaria. Section in 7${\mu}m$ thickness of tissue was done and stained with Hematoxylin-Eosin. All the specimens were observed under the light microscopy. The following results were obtained. 1 . During the whole period of experiment, fibrous connective tissue was revealed at 1week after surgery which meant rapid soft tissue recovery. The healing rate of defected area into new bone formation of the test group was observed more rapid tendency than other two groups. 2 . The sequence of healing rate of bone defected area was as follows ； test group, positive control, negative control group. 3 . During the experiment, an osteoclastic cell around preexisted bone was not found. New bone formation was originated from the periphery of the remaing bone wall, and gradually extended into central portion of the bone defect. 4 . The biodegradable barrier membrane was observed favorable biocompatibility during this experimental period without any other noticeable foreign body reaction. And mineralization in the newly formed osteoid tissue revealed relatively more rapid than other group since early stage of the healing process. Conclusively, the cultured bone cell inoculated onto the biodegradable barrier membrane may have an important role of regeneration of artificial bone defects of alveolar bone. This study thus demonstrates a tissue-engineering the approach to the repair of bone defects, which may have clinical applications in clinical fields of the dentistry including periodontics.

• Journal of Forest and Environmental Science
• /
• v.17 no.1
• /
• pp.1-17
• /
• 2001

Forming a part of "Cooperative Practical Study for the Modernization of the Management of National Forest", this study was conducted to provide overall ecological information for the natural regeneration of major tree species on the basis of community structural attributes in the deciduous forest ecosystem. Followings are summarized characteristics of the natural regeneration for the selected tree species. Betula costata : Although large number of seeds are dispersed by wind, they require mineral soils to germinate. Thick litter layer could be an obstacle to germinate. After germination, the seedling requires large amount of light for successful establishment. Acer mono : Characterized by high shade tolerance and weak drought resistance, the seedling should be overcasted with more than 50% of canopy coverage. High stand density should be maintained to produce good quality of timber. The potential of coppice may be high. Ulmus laciniata : Since this species needs high rate of troll moisture and light, around 60% of canopy coverage should be maintained to retain moisture and incoming light. The competition with other vegetation should be removed for the favor of successful seedling establishment. Fraxinus mandshurica : This species requires moist mineral soils to germinate. After germination, the seedling needs large amount of light and moisture for successful establishment. Site preparation should be applied to reduce competition with weedy vegetation. Fraxinus rhynchophylla : Interval of large seed crops may be highly varied. Thick litter layer could be an obstacle to germinate. Site preparation should be applied to reduce competition with weedy vegetation so as to achieve successful seedling establishment. Quercus mongolica : Including the difficulty of seed supply by the consumption, thick litter layer and mountain bamboo cover could be the obstacle to germinate. More than 50% of relative light intensity is necessary to achieve successful seedling establishment. Kalopanax pictus : Thick litter layer could be an obstacle to germinate. The seedling needs large amount of light and moisture for successful establishment. Abies holophylla : In spite of high shade tolerance, the growth rate in sapling stage may be extremely slow. Cornus controversa : Seeds (drups) are consumed and dispersed by animals, tending to be not sufficient in seed supply. This species requires large amount of light for successful germination and seedling establishment. Tilia amurensis : The difficulty of seed supply might be expected with low seed purity and double dormancy. Since thick litter layer could be an obstacle to germinate, the species requires moist mineral soils for successful germination. The potential of coppice may be extremely high.

• Journal of Korean Society of Forest Science
• /
• v.85 no.1
• /
• pp.34-43
• /
• 1996

We investigated the vegetation structure, and effects of canopy degree(gap or purlieu to 25%, 50%, 75%, over 75%) of the overstory on seedling regeneration and survivorship, and sapling density, growth and growth type of Abies koreana in subalpine of Mt. Chiri. The stem density in Abies koreana stand was higher in middle story than upper story, individual trees in upper story occupied larger area and were more apart, resulted in uniform distribution. The regeneration and survivorship of seedlings and saplings were best in 25% of crown closure, in order of 50%, gap, but lowest in over 75% of crown closure. The annual growth rate and recent 5 years growth rate of saplings were highest in gap or purlieu and getting lower toward gradually higher coverage of overstory. And 10- to 20-Year-old saplings were mainly regenerated in stands with lower density(I or II), but most of 20 to 30 years old saplings were growing in stands with higher density (III or IV). The number of "A" type saplings grown normally in gap or purlieu was gradually decreased in stand with higher density but the number of "D" or "E" types of which growth was supressed or prohibited by the high density was abruptly increased. Saplings normally growing in the gap and purlieu showed the panicle type, but those grown under dense crown were greatly suppressed and showed the umbellate type.

• Journal of Korean Society of Forest Science
• /
• v.84 no.4
• /
• pp.447-455
• /
• 1995

Regeneration process of a mongolian oak forest in Bukam-Ryeong area, Mt. Jumbong, Kangwon-Do, was studied in relation to its structure. The dominant trees of the stands came up beyond 10m in height. The upper-tree layer was highly dominated by oaks, and they distributed horizontally in random. Oak trees of the middle layer and the lower layer were few in number and small in basal area, and tended to be distributed contagiously. In the trees of the upper layer, the distribution of the age tended to be two modal type which has the mode of 70 and 230 years in plot. In the horizontal distribution of these trees, some of the even-aged cluster which were constituted of several trees, were found. The rate of the stern diameter increment during first 25 years of the oaks in upper layer were higher than those of the same species in the middle layer. These results showed that after the forest canopy had been broken out, the seedlings which were established in dense there grow with the decreasing density and some of these, of which distribution became in random, would constitute the canopy.

• Archives of Plastic Surgery
• /
• v.35 no.3
• /
• pp.235-242
• /
• 2008

Purpose: Due to increasing interest in the treatment of spinal cord injuries, many histopathological studies have been conducted to prove that many neurotrophic factors including growth hormone are important for regeneration of the injured spinal cord. Growth hormone has to be given everyday, however, and this negatively affects compliance in clinical trials. Recently, the invention of sustained release growth hormone (SRGH) that can be given just once a week may both help the regeneration of injured spinal cord and, at the same time, be more compliant and convenient for clinical patients. Methods: In this study, thirty 7-week-old female Spraque-Dawley rats were subjected to a weight-driven impact spinal cord injury. They were divided into 3 groups and Group I and II were injected with SRGH once a week for 4 weeks; Group I were injected into the injured spinal cord area, while Group II were injected into the peritoneal cavity. Meanwhile, Group III were injected with normal saline solution. The functional outcome was evaluated using the Basso-Beattie-Bresnahan motor rating score and the inclined plane test was done 4 weeks after the first injection. Histopathological examination was performed at the same time and the amount of residual white matter was measured in all groups. Results: After 4 weeks, Groups I and II showed greater improvement than Group III(the control group) in the functional test. In the control group, invasion of atypical phagocytes, axonal degeneration, edema and cavity formation in the posterior site of spinal cord gray matter was observed in histopatholgical examination. The rate of residual white matter in Group III was less than in the other groups. Conclusion: Data showed significant functional and histopathological improvement in the groups treated with SRGH into the spinal and peritoneal cavity compared with the control group. SRGH is therefore beneficial because it helps with regeneration of the injured spinal cord and improves the compliance and convenience of patients.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.2
• /
• pp.119-124
• /
• 1997

Plantlets were regenerated from various explants (shoot tip, leaf blade, petiole and root segments) via organogenesis and/or somatic embryogenesis from Armoracia rusticana(Lam) Gaerth., Mey, et Scherb.. Shoot regeneration rate from callus was highest on the MS mediums supplemented with 0.5 ㎎/L IAA, 5.0㎎/L BA and 10.0㎎/L spermine. A Low frequency of regeneration occurred on hormone-free MS medium. Multiple shooks were regenerated at a pH of 4.0 to 8.0 on MS medium supplemented with 1.0 ㎎/L BA and 0.1 ㎎/L NAA. Polyamines promoted shoot- and root-formation by 2 to 4 times normal, Specific proteins associated with organogenesis were identified. Somatic embryogenesis occurred directly from the leaf blade, petiole and root segments cultured on MS medium with 2.0 ㎎/L BA and 2.0 ㎎/L BA and 2.0 ㎎/L NAA. Three types of regeneration in A, rusticana were clearly established, which could be applied to the study of morphogenesis and genetics at cell, tissue and organ levels.

• Journal of Plant Biotechnology
• /
• v.34 no.3
• /
• pp.223-227
• /
• 2007

Plant regeneration system from leaf and root segments of Lycoris chejuensis via bulblet formation was established. Surface-sterilized leaf and root segments were cultured on the B5 medium containing 2,4-D. After 12 weeks of culture onto B5 medium containing 2,4-D, white globular structures and white calluses were formed on the cut surface of the explants. The highest frequency of globular structures and calluses formation from leaf explants was 32.1% when leaf explants were cultured onto B5 medium supplemented with 1 mg/L of 2,4-D. However, the higher concentration of 2,4-D (over than 3 mg/L) resulted in decrease of the frequency. In comparison to leaf explants, root segments showed the highest frequency at a rate of 36.1% when root explants were cultured onto B5 medium supplemented with 3 mg/L of 2,4-D. These structures and calluses were sub-cultured and proliferated onto the same culture medium. Upon transfer to B5 basal medium, white globular structures were developed into bulblets and normal plantlets. After 4 weeks of incubation in the light, plantlets were successfully rooted over the frequency of approximately 90%. Rooted plantlets were successfully transferred to potting soil and acclimatized in the growth chamber. The plant regeneration system of Lycoris chejuensis established in this study, might be applied to mass proliferation, conservation of genetic resources and genetic transformation for molecular breeding.