• Korean Journal of Plant Resources
• /
• v.26 no.2
• /
• pp.320-327
• /
• 2013

This study was carried out to address an efficient in vitro regeneration system from seed-derived callus of Phragmites communis, and to evaluate genetic variations of the regenerants using ISSR markers. Shoot regeneration via calli was greatly influenced by N6 medium compared with MS medium, and plant regeneration frequency was 90% in N6 supplemented with BA 0.25 mg/L and BA 0.5 mg/L. According to ISSR analysis of the thirty regenerants, out of 94 loci detected overall, 16 were identified to be polymorphic with a rate (PR) of 17.0%. The mean gene diversity (h) of different in vitro condition was 0.03 and ranged from 0.008 for N6 with BA 5 mg/L, to 0.040 for MS with IAA 0.1 mg/L+kinetin 2 mg/L. The results indicate that the regenerants have a low genetic variation, and ISSR analysis is effective to detect genetic variation of regenerants.

• Journal of Periodontal and Implant Science
• /
• v.41 no.1
• /
• pp.10-16
• /
• 2011

Purpose: Avulsed tooth can be completely recovered, if sound periodontal ligament (PDL) of tooth is maintained. Although a lot of storage solutions have been explored for the better storage of avulsed tooth, there is a shortcoming that the preservation time is much short. On the other hand, there has been studies that (-)-epigallocatechin-3-gallate (EGCG), the most abundant polyphenol in green tea, which is related to the anti inflammatory, antioxygenic, and antibacterial effects, allows the successful preservations of tissues and cells. This study evaluated the effect of EGCG on avulsed-teeth preservation of Beagle dogs for a period of time. Methods: The atraumatically extracted teeth of Beagle dogs were washed and preserved with 0/10/$100\;{\mu}M$ of EGCG at the time of immediate, period 1 (4 days in EGCG-contained media and additional 1 day in EGCG-free media), period 2 (8 days in EGCG-contained media and additional 2 days in EGCG-free media) and period 3 (12 days in EGCG-contained media and additional 2 days in EGCG-free media). Then, the cell viabilities of preserved teeth was calculated by dividing optical density (OD) of 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay with OD of eosin assay to eliminate the measurement errors caused by the different tissue volumes. Results: From the results, the immediately analyzed group presented the highest cell viability, and the rate of living cells on teeth surface decreased dependent on the preservation period. However, the $100\;{\mu}M$ of EGCG-treated group showed statistically significant positive cell activity than EGCG-free groups throughout preservation periods. Conclusions: Our findings showed that $100\;{\mu}M$ EGCG could maintain PDL cell viability of extracted tooth. These results suggest that although EGCG could not be a perfect additive for tooth preservation, it is able to postpone the period of tooth storage. However, further in-depth studies are required for more plausible use of EGCG.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.4.1-4.10
• /
• 2019

Background: The mandibular third molar (M3) is typically the last permanent tooth to erupt because of insufficient space and thick soft tissues covering its surface. Problems such as alveolar bone loss, development of a periodontal pocket, exposure of cementum, gingival recession, and dental caries can be found in the adjacent second molars (M2) following M3 extraction. The specific aims of the study were to assess the amount and rate of bone regeneration on the distal surface of M2 and to evaluate the aspects of bone regeneration in terms of varying degree of impaction. Methods: Four series of panoramic radiographic images were obtained from the selected cases, including images from the first visit, immediately after extraction, 6 weeks, and 6 months after extraction. ImageJ software^® (NIH, USA) was used to measure linear distance from the region of interest to the distal root of the adjacent M2. Radiographic infrabony defect (RID) values were calculated from the measured radiographic bone height and cementoenamel junction with distortion compensation. Repeated measures of analysis of variance and one-way analysis of variance were conducted to analyze the statistical significant difference between RID and time, and a Spearman correlation test was conducted to assess the relationship between Pederson's difficulty index (DI) and RID. Results: A large RID (> 6 mm) can be reduced gradually and consistently over time. More than half of the samples recovered nearly to their normal healthy condition (RID ≤ 3 mm) by the 6-month follow-up. DI affected the first 6 weeks of post-extraction period and only showed a significant positive correlation with respect to the difference between baseline and final RID. Conclusions: Additional treatments on M2 for a minimum of 6 months after an M3 extraction could be recommended. Although DI may affect bone regeneration during the early healing period, further study is required to elucidate any possible factors associated with the healing process. The DI does not cause any long-term adverse effects on bone regeneration after surgical extraction.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.282-291
• /
• 2010

This study is carried out in order to suggest the effective method to enhance the resettlement of natives for re-maintenance promotion district of Asansi. This study is carried out through current status survey, native survey, and examining related laws, and the result of study is as follows. First, as a result of examining the intention of resettlement for the residents and merchants who live in the project district, 84% of residents and 80% of merchants wish to resettle. Second, in order to enhance the rate of resettlement, driving project to satisfy the demands of residents and merchants is needed. For this, house supplying policy and complex design technique for corresponding this tendency is needed because they prefer to live a single houses or housing attached to shopping street of 100 million won valued below as well as apartments,. And new types of business which can activate the function of the old city are needed, but making commercial space where current merchants can constantly do business activities is demanded. Third, the expansion of urban regeneration concept which have economics, society, culture, welfare and community as well as physical environment improvement are emphasized is needed. Fourth, the role of government for urban regeneration should be strengthened, and institutional improvement should be supported. Government needs to constantly support including financial supporting in order for the regeneration of regional city, and especially should scout for the policies which community can be maintained and should support first. For this, utilizing public lands inside project district into leading project, government should utilize into "constructing rental houses for natives", inducing the leading key facilities. Fifth, various plan techniques for the resettlement of natives of other advanced countries should be examined and be achieved.

• Journal of Plant Biotechnology
• /
• v.30 no.1
• /
• pp.27-33
• /
• 2003

The optimal condition of in vitro regeneration and transformation were investigated for newly bred potato varieties in Korea. Leaf and internodal stem tissues of 'Chubak', 'Namsuh', 'Jasim', 'Jopung' and 'Jowon' were used to investigate the influence of growth regulator on regeneration efficiency The effect of phenolic compound acetosyringone on gene transformation efficiency was also investigated. Leaf tissue of 'Jowon' and internodal stem tissues of 'Jopung' were showed high regeneration efficiency on M5 medium supplemented with 0.1 mg/L GA₃, 2.0 mg/L Zeatin and 0.01 mg/L NAA. The other three potato cultivars were showed low regeneration efficiency less than 25%. The effect of acetosyringone on Agrobacterium-mediated gene transformation with leaf and internodal stem tissues were noticeable. By adding the 75 μM of acetosyringone during the Agrobacterium innoculation, the transformation efficiency was increased up to 1.5∼4.0 fold compare to non-treated control. In case of 'Jowon' the transformation efficiency was 87.9% in leaf tissue and 'Jopung' was 68.4% in internodal stem tissues.

• Journal of Plant Biotechnology
• /
• v.39 no.4
• /
• pp.288-294
• /
• 2012

In order to establish an efficient adventitious shoot regeneration conditions from leaf explants for Asian pear 'Whangkeumbae', the effect of concentration and kinds of plant growth regulator and carbon source was investigated. Leaf explants of cultures grown on Murashige and Skoog (MS) medium containing 8 g/L plant agar were used. When the medium contained 0.25 mg/L thidiazuron (TDZ) and 0.3 mg/L indolebutyric acid (IBA), the adventitious shoot regeneration rate (ASRR) was greater as 61.1% than others treated and higher TDZ concentrations (2.5 and 5 mg/L) treatment significantly reduced the ASRR. As the effect of IBA and indoleacetic acid (IAA) concentration on the ASRR, 0.5 mg/L TDZ plus different concentration of IAA exhibited relatively high ASRR and 0.5 mg/L TDZ plus 0.3 mg/L IAA showed the highest ASRR of 76.7%. Also the effect of sucrose and sorbitol as carbon source on regeneration was examined. The highest ASRR and the most shoots per explants averaged 94.4% and 3.49 by treatment of 30 mg/L sorbitol, respectably. Sorbitol is considered better carbon source than sucrose for shoot regeneration of 'Whangkeumbae' pear.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.67-71
• /
• 2013

$FeCl_3$ has been used as an etchant for metal etching such as Fe, Cu, and Al. In the process of metal etching, $Fe^{3+}$ is reducted to $Fe^{2+}$ and the etching rate becomes slow and etching efficiency decreased. Waste $FeCl_3$ etchant needs to be regenerated because of its toxicity and treatment cost. In this work, HCl was initially mixed with the waste $FeCl_3$ and then, strong oxidants, such as $O_2$ and $H_2O_2$, were added into the mixed solution to regenerate the waste etchant. During successive etching and regeneration processes, oxygen-reduction potential (ORP) was continuously measured and the relationship between ORP and etching capability was investigated. Regenerated etchant using a two vol% HCl of the total etchant volume and a very small amount of $H_2O_2$ was very effective in recovering etching capability. During the etching-regeneration process, the same oxygen-reduction potential variation cannot be repeated every cycle since concentrations of $Fe^{2+}$ and $Fe^{3+}$ ions were continuously changed. It suggested that the control of etching-regeneration process based on the etching time becomes more efficient than that of the process based on oxygen reduction potential changes.

• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.27-37
• /
• 2006

Although the main purpose of periodontal treatment to regenerate is the complete regeneration of periodontal tissue due to periodontal disease, most of the treatment cannot meet such purpose because healing by long epithelial junction. Therefore, diverse materials of resorbable and non-resorbable have been used to regenerate the periodontal tissue. Due to high risk of exposure and necessity of secondary surgical procedure when using non-resorbable membrane, guided tissue regeneration using the resorbable membrane has gain popularity, recently. However, present resorbable membrane has the disadvantage of not having sufficient time to regenerate date to the difference of resorption rate according to surgical site. Meanwhile, other than the structure stability and facile manipulation, acellular dermal matrix has been reported to be a possible scaffold for cellular proliferation due to rapid revascularization and favorable physical properties for cellular attachment and proliferation. The purpose of this study is to estimate the influence of acellular dermal matrix on periodontal ligament, cementum and alveolar bone when acellular dermal matrix is implanted to 1-wall alveolar bone defect. 4 dogs of 12 to 16 month old irrelevant to sex , which below 15Kg of body weight, has been used in this study. ADM has been used for the material of guided tissue regeneration. The 3rd premolar of the lower jaw was extracted bilaterally and awaited for self-healing. subsequently buccal and lingual flap was elevated to form one wall intrabony defect with the depth and width of 4mm on the distal surface of 2nd premolar and the mesial surface of 4th premolar. After the removal of periodontal ligament by root planing. notch was formed on the basal position. Following the root surface treatment, while the control group had the flap sutured without any treatment on surgically induced intrabony defect. Following the root surface treatment, the flap of intrabony defect was sutured with the ADM inserted while the control group sutured without any insertion. The histologic specimen was observed after 4 and 8 weeks of treatment. The control group was partially regenerated by periodontal ligament, new cementum and new alveolar bone. the level of regeneration is not reached on the previous formed notch. but, experimental group was fully regenerated by functionally oriented periodontal ligament fiber. new cementum and new alveolar bone. In conclusion, we think that ADM seems to be used by scaffold for periodontal ligament cells and the matrix is expected to use on guided tissue regeneration.

• Journal of Periodontal and Implant Science
• /
• v.31 no.3
• /
• pp.581-595
• /
• 2001

In performing implant procedures in the anterior portion of the maxilla, many difficulties exist because of anatomical reasons, such as the proximity of the nasal floor, lateral extension of the incisive canal, and labial concavity. On the other hand, in the posterior region of the maxilla, there is often insufficient recipient bone between the maxillary sinus and alveolar ridge due to alveolar ridge resorption and pneumatization of the maxillary sinus. In order to perform implants in such regions, ridge augmentation procedures such as onlay bone graft, guided bone regeneration, and maxillary sinus grafting are performed. In studies of Caucasians, use of autograft from mandibular symphysis has been reported to be highly successful in maxillary sinus grafting. However, in a clinical study of Koreans, autograft of mandibular symphysis has been reported to have significantly low success rate. It has been hypothesized that this is because of insufficient cancellous bone due to thick cortical bone. In order to test this hypothesis, bone quality and morphology of Koreans can be compared with those of Caucasians. In this study, the bone density and morphology of the cortical bone and cancellous bone in the mandibular symphysis of 35 Korean cadavers were evaluated. The following results were obtained: 1. In terms of bone density, type I, type II, and type III consisted of 1.4%(3/213), 72.3%(154/213), and 26.3%(56/213) of the cross-sectioned specimens, respectively. In general, the bone density tended to change from type II to type III, as cross-sectioned specimens were evaluated from the midline to the canine. Type IV wasn't observed in this study. 2. The distance between the root apex and the lower border of the cancellous bone was 18.34mm-20.59mm. Considering that the bone has to be cut 5mm below the root apex during the procedure, autografts with about 15mm of vertical thickness can be obtained. 3. The thickness of cortical bone on the labial side increased from the root apex to the lower border of the mandible. The average values ranged from 1.43mm to 2.36mm. 4. The labio-lingual thickness of cancellous bone ranged from 3.43mm to 6.51mm. The thickness tended to increase from the apex to the lower border of the mandible and decrease around the lower border of cancellous bone. From the above results, the anatomic factors of the mandibular symphysis (bone density, thickness, quantity and length of the cortical bone and cancellous bone) didn't show any difference from Caucasians, and it cannot be viewed as the cause of failure in autografts in the maxillary sinus for implants.

• Journal of Periodontal and Implant Science
• /
• v.30 no.4
• /
• pp.757-779
• /
• 2000

The aim of our study is to achieve complete periodontal tissue regeneration by the application of BMP and resorbable membrane. Three beagle dogs aged over one and half years and weighed 14 to 16 kg were used in this study. Mandibular 1st, 2nd premolars were extracted bilaterally. Horizontal furcation defects were induced around 3rd, 4th premolars bilaterally. BMP-4 were applied in the right side with resorbable membranes and only resorbable membranes were applied in the left side respectively. Each animal was sacrificed at 2, 4, and 8weeks, after regenerative surgery. Specimens were prepared with Hematoxylin-Eosin stain and Goldner's modified Masson Trichrome stain for light microscopic evaluation. The results were as follows: 1. At 2 weeks after regenerative surgery, downgrowth of junctional epithelium was observed both in the membraneapplied site and BMP-4-and-membrane-applied site. 2. At 4 weeks after regenerative surgery, resorbable membranes were completely resolved, therefore would not prevent downgrowth of junctional epithelium. New bone formation, new cementum formation and Sharpey's fiber were observed in BMP-4-andmembrane-applied site. 3. At 8 weeks after regenerative surgery, downgrowth of junctional epithelium was observed in the membrane-applied site. But, new cementum formation was observed in the same site. The extensive regeneration of new bone, new cementum and remarkable formation of Shapey's fiber were showed in BMP-4-and-membrane-applied site. 4. Resorbable membranes were resolved via the cell-mediated processes. 5. Periodontal tissue regeneration were better achieved in the BMP-4-andmembrane-applied site than in the membrane-applied site. Within the above results, BMP-4 may have the strong capability to form the new bone and resorbable membrane may be able to prevent the bony ankylosis. However, resolution rate of resorbable membrane may not be enough to protect rapid epithelial downgrowth for ideal periodontal regeneration. In conclusion, I suggest BMP-4 may have the strong possibility to be utilized in the clinical periodontal treat-