• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• 제11권3호
• /
• pp.349-358
• /
• 1999

Thermodynamic cycle analysis has been performed to maximize the liquid amount for various hydrogen liquefaction systems using GM(Gifford-McMahon) refrigerator. Since the present authors' previous experiments showed that the liquefaction rate was approximately 5.1mg/s in a direct contact with a commercial GM refrigerator, the purpose of this study is to predict how much the liquefaction rate can be increased in different configurations and with improved heat exchanger performance. The optimal operating conditions have been analytically sought with real properties of normal hydrogen for the single-stage GM precooled L-H(Linde-Hampson) system, the two-stage GM direct contact system, the two-stage GM precooled L-H system and the two-stage helium GM-JT (Joule-Thomson) system. The maximum liquefaction rate has been predicted to be only about 7 times greater than the previous experiment, when the two-stage precooling is employed and the effectiveness of heat exchangers approaches to 99.0%. It is concluded that the liquefaction rate is limited mainly by the cooling capacity of the current GM refrigerators and a larger scale of hydrogen liquefaction is possible with a greater capacity of cryocooler at 60-70 K range.

• Korean Journal of Computational Design and Engineering
• /
• 제3권3호
• /
• pp.201-209
• /
• 1998

To develop timely an optimal fan, a design system and a new manufacturing process used step by step have to be integrated. A small sized optimal fan for refrigerators, that was the goal on this project, was developed by the following principal processes. All processes are technologically linked in many directions: The existing fan was measured through reverse engineering. The measured data was used for the basic source of 3D design. The performance tests were carried and used as the data for the evaluation of the existing fan. Flow analysis by FANS-3D/sup [1]/ was performed at the given information (pressure drop and flow rate) to find out the configuration of optimal fan design. The flow patterns were investigated to measure the performance of fan through numerical experiment. The grid point data obtained by the above analysis turned into 3D high efficiency fan model by using CATIA. The product was manufactured by RP process (SLS, SLA) and tested the characteristic curves of the developed fan to compare with the existing fan. The modification of fan design were all examined to see any change in performance and checked to find any deficiency in assembling the fan into a duct. After the plastics flow analysis of the injection molding cycle to ensure acceptable quality fan, an optimal mold was processed by using tool-path for the newly designed fan.

• Journal of Global Scholars of Marketing Science
• /
• 제16권2호
• /
• pp.1-26
• /
• 2006

This article presents the results of a survey of 209 Chinese male consumers. In this study, consumer evaluations and attitude towards products made in industrialized and newly industrialized countries were obtained along with measures of consumer shopping behavior. The results indicate that industrialized countries were perceived as manufacturing products that are more reliable, technologically advanced, stylistic, and costly than newly industrialized countries. A duster analysis using moderating variables related to shopping for refrigerators, cameras, and t shirts revealed that the Chinese respondents could be grouped into four segments identified as Durables Enthusiasts, Duraoles Uninvolved, Inexperienced Shoppers, and Apparels Involved. Country attitudes and evaluations were fairly consistent across the newly industrialized countries but varied for industrialized countries across the four segments. Similar results also emerged from a correlation analysis of made in attitude scales (based on moderating shopping variables) with country evaluations. It was found that Chinese consumers' involvement with durable products was positively related to the evaluation of industrialized countries. Consumers belonging to the Durable Enthusiasts and Apparels Involved segments evaluated industrialized countries more favorably and believed to a greater extent that products made in these countries are reliable, technologically advanced, and stylistic than consumers belonging to the Durables Uninvolved and Inexperienced Shopper segments. Managerial and research implications are derived from these results.

• Transactions of the Korean hydrogen and new energy society
• /
• 제22권5호
• /
• pp.678-685
• /
• 2011

An Ejector enhances system efficiency, are easily operated, have a mechanically simple structure, and do not require a power supply. Because of these advantages, the ejector has been applied to a variety of industrial fields such as refrigerators, power plants and oil plants. In this work, an ejector was used to safely recycle anode tail gas in a 75-kW Molten Carbonate Fuel Cell (MCFC) system at KEPCO Research Institute. In this system, the ejector is placed at mixing point between the anode tail gas and the cathode tail gas or the fresh air. Commercial ejectors are not designed for the actual operating conditions for our fuel cell system. A new ejector was therefore designed for use beyond conventional operating limits. In the first place, a few sample ejectors were manufacured and the entrainment ratio was measured at a dummy stack. Through this experiment, the optimum ejector was chosen. The 75-kW MCFC system equipped with this optimum ejector was operated successfully.

• Journal of Information Processing Systems
• /
• 제7권1호
• /
• pp.111-120
• /
• 2011

The concept of Smart-Homes is becoming more and more popular. It is anticipated that Radio Frequency IDentification (RFID) technology will play a major role in such environments. We can find many previously proposed schemes that focus solely on: authentication between the RFID tags and readers, and user privacy protection from malicious readers. There has also been much talk of a very popular RFID application: a refrigerator/bookshelf that can scan and list out the details of its items on its display screen. Realizing such an application is not as straight forward as it seems to be, especially in securely deploying such RFID-based applications in a smart home environment. Therefore this paper describes some of the RFID-based applications that are applicable to smart home environments. We then identify their related privacy and security threats and security requirements and also propose a secure approach, where RFID-tagged consumer items, RFID-reader enabled appliances (e.g., refrigerators), and RFID-based applications would securely interact among one another. At the moment our approach is just a conceptual idea, but it sheds light on very important security issues related to RFID-based applications that are beneficial for consumers.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• 제5권3호
• /
• pp.217-225
• /
• 1993

Nonflammable mixtures of flammable and nonflammable refrigerants are possible as substitute refrigerants for use in domestic heat pumps and refrigerators. Refrigerant leakage from such a system is of paramount concern since it is possible that the resulting mixture composition remaining in system will reside in the flammable range. This paper presents a simulation of a leakage process of refrigerant mixtures. Idealized cases of isothermal leakage process are considered in this study representing a slow leak. Simulation is performed for selected composition of binary and ternary refrigerant mixture; R-32/134a and R-32/125/134a. Mixture compositions with respect to percentage leak of original charge are presented. In isothermal leakage process, both vapor and liquid compositions of more volatile refrigerant decrease during vapor and liquid leak, but the total composition of this component decreases during vapor leak and increases during liquid leak. Vapor and liquid compositions are determined depending on the vapor-liquid equilibrium relation of the refrigerant mixture. The refrigerant mixture left in the system can go to a nonflammable direction relying on which component in the mixture is flammable.

• Proceedings of the SAREK Conference
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.292-297
• /
• 2008

Various types of refrigerators become popular in the market such as a common refrigerator, kimchi refrigerator and wine cellar. It is required to develop a multi function refrigerator which has different purposes in each evaporator. In this study, the performance of a multi type refrigerator system, which consists of one machine room and three evaporators, was measured in a bench type multi refrigerator. The multi type refrigerator system was tested by varying the number of refrigerator cabinet, refrigerant charge amount, temperature condition. Based on experimental data, the multi type refrigerator showed better performance than the conventional refrigerator(single type) At the same external load condition, the COP of the multi type refrigerator was $1.22{\sim}1.29$, but the COP of the single type refrigerator was 1.0.

• Journal of the Semiconductor & Display Technology
• /
• 제14권3호
• /
• pp.13-22
• /
• 2015

LED (Light Emitting Diode) lighting is gaining more and more market penetration as one of the global warming countermeasures. LED is the next generation of fusion source composed of epi/chip/packaging of semiconductor process technology and optical/information/communication technology. LED has been applied to the existing industry areas, for example, automobiles, TVs, smartphones, laptops, refrigerators and street lamps. Therefore, LED makers have been striving to achieve the leading position in the global competition through development of core source technologies even before the promotion and adoption of LED technology as the next generation growth engine with eco-friendly characteristics. However, there has been a point of view on the cost compared to conventional lighting as a large obstacle to market penetration of LED. Therefore, companies are developing a Chip-Scale Packaging (CSP) LED technology to improve performance and reduce manufacturing costs. In this study, we perform patent analysis associated with Flip-Chip CSP LED and flow chart for promising technology forecasting. Based on our analysis, we select key patents and key patent players to derive the business strategy for the business success of Flip-Chip CSP PKG LED products.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• 제23권7호
• /
• pp.513-519
• /
• 2011

The object of this study is to investigate the performance characteristics of refrigerators using a single-circuit multi cycle and a bypass two-circuit multi cycle. Each refrigeration cycle was tested by varying secondary fluid mass flow rate and temperature. Based on the experimental data, the optimum refrigerant charge was 48 g and the COP at the optimum secondary fluid mass flow rate was 1.53 for the single-circuit multi cycle. For freezer(F)-only mode, both the single-circuit multi cycle and the bypass two-circuit multi cycle were operated at overcharge conditions, resulting in an increase of the secondary fluid mass flow rate. The maximum COPs of the single-circuit multi cycle and the bypass two-circuit multi cycle were 1.22 and 1.35, respectively. The COP increased by 10.7% with the application of the bypass two-circuit multi cycle.

• Journal of the Korean Society of Safety
• /
• 제28권3호
• /
• pp.51-55
• /
• 2013

The purpose of this study is to find the causes of malfunctions and defective operation of printed circuit boards(PCBs) built into home refrigerators to perform power saving functions. This study performed an electrostatic test of a PCB built-in using an Auto Triggering system; lightning and impulse tests using an LSS-15AX; and an impulse test using an INS-400AX. From the analysis of a secondarily developed product, it was found that electrostatic discharge(ESD) caused more malfunctions and defective operations than electric overstress(EOS) due to overvoltage. As a result of increasing the condenser capacity of the PCB circuit, withstanding voltage was increased to 7.4 kV. In addition, this study changed the power saving mode and connected a varistor to the #2 pin of an IC chip. As a result, the system consisting of all specimens of a finally developed product was operated stably with an applied voltage of less than 10 kV. This study found it necessary to perform quality control at the manufacturing stage in order to reduce the occurrence of electrostatic accidents to IC chips built into a PCB.