• Imaging Science in Dentistry
• /
• v.37 no.2
• /
• pp.69-77
• /
• 2007

Purpose: To evaluate the accuracy of the imaging reformation of cone beam computed tomography for the assessment of bone defect healing in rat model. Materials and Methods: Sprague-Dawley strain rats weighing about 350 gms were selected. Then critical size bone defects were done at parietal bone with implantation of collagen sponge. The rats were divided into seven groups of 3 days, 1 week, 2 weeks, 3 weeks, 4 weeks, 6 weeks, and 8 weeks. The healing of surgical defect was assessed by multi planar reconstruction (MPR) images and three-dimensional (3-D) images of cone beam computed tomography, compared with soft X-ray radiograph and histopathologic examination. Results: MPR images and 3-D images showed similar reformation of the healing amount at 3 days, 1 week, 2 weeks, and 8 weeks, however, lower reformation at 3 weeks, 4 weeks, and 6 weeks. According to imaging-based methodologies, MPR image revealed similar reformation of the healing amount than 3-D images compare with soft X-ray image. Among the four threshold values for 3-D images, 400-500 HU revealed similar reformation of the healing amount. Histopathologic examination confirmed the newly formed trabeculation correspond with imaging-based methologies. Conclusion: MPR images revealed higher accuracy of the imaging reformation of cone beam computed tomography and cone beam computed tomography is a clinically useful diagnostic tool for the assessment of bone defect healing.

• Korean Medical Education Review
• /
• v.9 no.2
• /
• pp.1-12
• /
• 2007

Purpose: The aim of this study is to identify the elements of success in curriculum reformation using focus group interview and faculty survey. Methods: We analyzed the 105 questionnaires that were collected horn 450 faculties in Yonsei University College of Medicine from September 1 to September 12, 2005. The interview of focus group was conducted to 105 faculty and students using 10 interview questions from July 25 to August 29, 2005. The data of focus group interview and faculty survey were analyzed by content analysis. frequency and percentile. Results : 66.7% of faculty have pointed out that it is right a direction of new curriculum but there are some problems in curriculum management. The most frequently addressed problem in the new curriculum is as follows : ability of self-directed learning(15.3%). deficiency of faculty understanding(10.5%). The faculty comments on the improvement areas of new curriculum such as curriculum revision (8.6%). efficiency of curriculum management (6.7%), reward and incentive system of education(6.7%). The focus groups pointed out the important factors of curriculum reformation such as horizontal and vertical integrity between subjects, improvement of student achievement test, enhancement of self-directed learning. responsibility and authorities of course director. Conclusions : It should be concluded. to succeed curriculum reformation, which the purpose of curriculum reformation announces obviously and management group should effort continuously so that professors may understand the new curriculum. The course directors have to responsibility and authorities operating the subjects and the university should develop the students' evaluation system and faculty performance appraisal system.

• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.397-409
• /
• 2011

This study was carried out for improving the effectiveness of water resources development project through local resident opinions in the environmental impact assessment(EIA). The EIA reports of seven dams were examined. Four dams -Youngju Dam, Seongduck Dam, Buhang Dam and Hantangang Dam- which included many local opinions including 470 opinions of 341 local residents were selected to be analyzed. Local residents submitted their opinions in the six fields which are meteorological phenomena, water quality, land use, fauna and flora, noise and vibration, and residence, and the major opinions of those opinions came from the atmosphere environment field which is 32% of total opinions and social and economic field which is 38% of total opinions, respectively. In submerged area, opinions of the measure for migration and compensation were 91% and in non-submerged area, opinions of the measure for meteorological phenomena was 86%. Those percentages were maximum in each area. Opinions concerned meteorological phenomena were 86% and 53% in Youngju Dam and Seongduck Dam where area is surrounded by existing dam, but there was only 9% and 0% of opinions in Buhang Dam and Hantangang Dam where area is without existing dam nearby. The reformation methods which reflected the resident's opinions were suggested on EIA in dam development projects. First of all, reliability and objectivity of the field of meteorological phenoma should be enhanced by scientific prediction of the phenomenon days. Secondly, techniques reducing uncertainty of various water quality prediction models ought to be developed and effectiveness of the reduction strategies in environmental impact should be quantified. Finally, the draft of EIA report should involve the detailed plans of migration and compensation's procedures, criteria and measures to support.

• Journal of Korean Home Economics Education Association
• /
• v.14 no.3
• /
• pp.11-24
• /
• 2002

This study was to propose a basic model of specialization in home economics for vocational high school development in JellaNamdo. The results were summarized as follows. First. based on the changes in economic environment into service industry and national educational policy and local vocational educational Policy, it may be good time to socially discuss special vocational high school in home economics in JellaNamdo in the light of meeting local students' demand. Secondly, considering local students' preference and the conditions of local economy and industry. Thirdly, the system for specialization in home economics of vacational high school may be suggested. The basic model was organized plans of system reformation by stages, a substantial plans, and academic or employment course development. System reformation plans was that the high school-concentrated district should be first selected by area and department and one high school should be selected as special high school in home economics. Then specific method should proceed school name, the measure to recruit students, specific method for reorganizing department. and curriculum. Finally, the annual plan to establish new department and to recruit students should be Prepared. Substantial plans were to actually forward such methods to reorganize system and to enhance the qualify of vocational high school education. the method for making substantial should be studied further It may include: the methods to ensure special teachers, training room, and facilities. the prospect and direction of career development, employment, or initiation, special research, and the application to educational environment. Employment courses were developed SOHO establishment in small capital and special store management. And academic courses was to enter a collage or university in conjunction with major departments.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.123.2-123.2
• /
• 2016

Mg alloys have been developed for automobile and mobile equipments because of their low density of $1.7g/cm^3$. One of the main problems of Mg alloys is their poor corrosion resistance which has limited their wide applications. Plasma electrolytic oxidation (PEO) method is one of the promising surface treatment methods for Mg alloys. In this presentation, experimental data about the effects of solution composition and form of current are presented and discussed in view of dielectric breakdown and reformation of PEO films The role of various anions of phosphate, silicate, fluoride, carbonate and hydroxide ions is discussed in view of film breakdown and reformation of PEO films.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.115.2-115.2
• /
• 2016

Al alloys are being used widely for automobile, aerospace and mechanical components because of their high strength ratio to weight. However, still they suffer from abrasion or corrosion owing to insufficient resistances to friction or mechanical impact and chemical attack. Plasma electrolytic oxidation (PEO) method is one of the promising surface treatment methods for Al alloys which can render better hardness than aluminum anodic oxide (AAO) films prepared by conventional anodizing method in acidic solutions. In this presentation, some basic nature of PEO film formation and growth process on Al alloys will be presented based on the experimental results obtained and discussed in view of dielectric breakdown and reformation and the role of various anions in film breakdown and reformation of PEO films.

• Journal of the Korean Society for information Management
• /
• v.19 no.1
• /
• pp.163-187
• /
• 2002

The objective of this study was not only to evaluate different academic library homepages but to hit upon and suggest a reformation plan for their future improvement. For this purpose. academic library web pages of Korea were divided into three major groups -- those of national universities, private ones, and junior colleges. Their web pages were evaluated using a number of criteria. Also, their circumstances and problems were tried to grasp and the methods to be corrected were suggested in this thesis. Literature review were performed for this study and suggestions and advices from professional groups that is called Delphi method were used as a tool to achieve the objective of this study. For a basic analysis, frequency analysis and descriptive statistics were used for analysing data. Also, t-test, ANOVA, and chi-square analysis were used to examine whether there are any significant differences in each groups or not. and Pearson product-moment correlation coefficients were used to find out the correlation among several variables.

• Archives of Craniofacial Surgery
• /
• v.20 no.1
• /
• pp.31-36
• /
• 2019

Background: After closed reduction, patients are sometimes concerned that their external nasal shapes have changed. The aim of this study was to investigate and explain changes in nasal shape after surgery through objective photogrammetric anthropometry measurements taken through three-dimensional (3D) reformed computed tomography (CT) images. Methods: Our study included 100 Korean patients who underwent closed reduction of isolated nasal bone fracture from January 2016 to June 2017. Using the ruler tool in Adobe Photoshop CS3, we measured preoperative and postoperative nasal base heights, long nostril axis lengths, both nasal alar angles, and amount of nasal deviation through the 3D reformation of soft tissue via CT scans. We then compared the dimension of nose. Results: The amount of postoperative correction for nasal base height was 1.192 mm. The differences in nostril length between each side were found to be 0.333 mm preoperatively and 0.323 mm postoperatively. The differences in the nasal alar angle between each side was $1.382^{\circ}$ preoperatively and $1.043^{\circ}$ postoperatively. The amount of nasal deviation was found to be 5.248 mm preoperatively and 1.024 mm in postoperatively. Conclusion: After the reduction of nasal bone fractures, changes in nasal dimensions were noticeable in terms of nasal deviation but less significant in nasal tips, except for changes in nasal alar angles, which were notable.

• Imaging Science in Dentistry
• /
• v.37 no.3
• /
• pp.165-170
• /
• 2007

Purpose: To estimate the shape of root and pulp canal using a dental cone beam computed tomography (CBCT) and to evaluate the accuracy of imaging reformation. Materials and Methods: CBCT images were obtained with incisors, premolars, and molars as the destination by using PSR $9000N^{TM}$ Dental CT system (Asahi Roentgen Ind. Co., Ltd, Kyoto, Japan) and i-CAT (Imaging Sciences International, Inc, USA) cone beam CT unit that have different kind of detector and field of view, and compared these with the shape and the size of actual root and root canal. Results: When the measuring value of cone beam computed tomography concerning to each root's bucco-lingual diameter and mesio-distal diameter was compared with the value of the actual root, it reveals an error range $-0.49{\sim}+0.63$ mm at PSR900N and $-0.97{\sim}+1.14$ mm at i-CAT (P>0.05). It was possible to identify and measure PSR$9000N^{TM}$ Dental CT system to the limit $0.48{\pm}0.06mm$ (P>0.05) and i-CAT CBCT to the limit $0.86{\pm}0.09mm$ (P<0.05) on estimating the size and the shape of root canal. Two kinds of CBCT images revealed the useful reproducibility to estimate the shape of root, but there was the difference to estimate the shape of root according to apparatus. The reproducibility of root shape in the image of three-dimensions at PSR 900N is low such as 0.65 mm in a case of minute root canal. Conclusions: CBCT images revealed higher accuracy of the imaging reformation for root and pulp and clinically CBCT is a useful diagnostic tool for the assessment of root and canal. However, there are different qualities of imaging reformation according to CBCT apparatus and limitation of reproducibility for minute root canals.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.6
• /
• pp.519-522
• /
• 2004

In the course of anaerobic storage of excess sludge, odors due to chemicals such as hydrogen sulfide are produced. These odors cause many problems. Many methods have been developed to eliminate odors, but all current methods are not only costly, but also largely inef­fective. In this paper, we investigate the process of transformation of sludge microorganism cul­tures through intense aeration under nutrient-poor conditions, in terms of the selective adjust­ment and control of microorganism culture. The aerated sludge is subsequently returned to the adjusting pool, where the microorganisms inhibit odors, thus the excess sludge itself will act as an odor inhibitor. The process can be verified in terms of viability, in that the degradation capac­ity of the sludge was maintained after the intensely-aerated sludge was returned to the treat­ment system.