• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.15-18
• /
• 2003

무전극 형광램프는 발광하는 부분의 사이즈가 크고 광원의 특성상 점광원으로 볼 수 없기 때문에 효율적인 광학기구를 설계하기 어렵다. 특히 반사판 설계시 반사광이 램프로 재흡수 되는 것을 고려하여야 한다. 본 논문은 무전극 형광램프에 대하여 반사광이 램프로 재흡수 되는 것을 막고 효율을 높이며 목표배광에 맞출 수 있는 2차원 축대칭형 반사판 설계법을 제시하였다. 그리고 이 설계법의 문제점과 해결방법에 대하여 고찰하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.39-42
• /
• 2009

본 논문에서는 콤팩트 세라믹 메탈핼라이드 램프용 가로등 기구의 반사판에 대해 2차원 설계법을 기반으로 한 3차원 설계로 150W single-ended type 콤팩트 세라믹 메탈핼라이드 램프 전용의 가로등용 반사판을 설계하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.43-45
• /
• 2009

에너지 절약, 고효율의 광원들에 대한 사용이 장려되고 있는 현재, CMH 광원은 이러한 기대를 충족시켜 주는 광원으로서 각광받고 있다. 본 논문에서는 이러한 CMH 전용 터널 등기구의 반사판을 설계하여 그 결과를 예측하고, 광학 성능 예측 프로그램을 이용, 조명기구의 배치 결과까지 예측하여 국내 기준에 부합할 수 있는 성능을 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.551-554
• /
• 2004

LED는 소비전력이 적고, 수명이 길어 LCD Backlight 용 광원으로 주목받고 있다. 현재 휴대전화기용 LCD에 많이 사용되고 있는 소형 LED Backlight의 경우 입광부에 LED의 개수가 육안으로 확인 가능할 정도의 Hot Spot이 존재한다. 이에 본 논문에서는 Reflector를 사용하여 광의 손실을 줄이고 도광판의 입광부에 산란 패턴을 설계하여 적용함으로써 도광판 입광부에서 122.7%의 휘도 상승효과와 73.4%의 휘도 균일도를 얻을 수 있었으며 이로 인해 Hot Spot을 감소시킬 수 있었다.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.199-202
• /
• 2007

COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and has been developing by KARI for communication, ocean observation and meteorological observation. Conventional thermal control design, using MLI (Multi Layer Insulation), OSR (Optical Solar Reflector), heater and heat pipe, is utilized. Ka-band components are installed on South wall, while other equipment for sensors are installed on the opposite side, North wall. High dissipating communication units are located on external (surface) heat pipe and are covered by internal insulation blankets to decouple them from the rest of the satellite. External satellite walls are covered by MLI or OSR for insulation from space and for rejection internal heat to space. The ocean and meteorological sensors are installed on optical benches on the top floor to decouple thermally from the satellite. Single solar array wing is adopted in order to secure clear field of view of radiant cooler of IR meteorological sensor. This paper presents principles of thermal control design for the COMS.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1223-1231
• /
• 2010

The design is presented for a SATCOM antenna capable of simultaneous multi-band (X/Ku/Ka-Band) communications without replacement of feed horns or change of other parts in the application as a ground satellite terminal for large data transfer. The antenna is the offset configuration and consists of a dual-band(X/Ka-band) feed horn, a single-band(Ku-band) feed horn, a frequency selective surface(FSS) sub-reflector and a parabolic main-reflector. The antenna has a main reflector defining a prime focus and a frequency selective surface sub-reflector defining an image focus. A dual-band feed and a single-band feed are provided at each of the prime focus and image focus. The antenna is designed using 3D EM simulator and the gains measured in X/Ku/Ka-band of the complete antenna assembly is more than 31.6dBi, 36.8dBi, 40.8dBi, and the cross polarization is 21.7dB, 26.6dB, 25.2dB, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.181-189
• /
• 2019

In this study, a triple-band antenna that can be used in WLAN(Wireless Local Area Network) at 2.4 GHz, 5.8 GHz, and 5G at 3.5 GHz is fabricated. The proposed antenna uses a parasitic element to show the triple band, and the reflector is used at a distance of ${\lambda}/4$ from the antenna to reduce the Specific Absorption Rate(SAR). Its dimensions are $100{\times}75{\times}1.6mm^3$ and each parameter value is optimized for better performance and a lower SAR value. As a result, we obtained a bandwidth of 540 MHz(2.02~2.56 GHz), 390 MHz(3.39~3.78 GHz), and 1,210 MHz(5.56~6.77 GHz) based on the reflection loss factor of -10 dB. In addition, the SAR values of the antenna with reflector are observed to reduce below the SAR value of international standard.

• Korean Institute of Interior Design Journal
• /
• v.20 no.3
• /
• pp.152-160
• /
• 2011

Contemporary architecture pursues new method of Interpretation of Non-linear space as digital media appears. As various materials and new methods can be used due to developments in science and expansion of thinking, contemporary architectural color developed extensive possibilities. It means not only the change of drawings, method of architectural product and materials but also the change of value system for architectural space. Thus the purpose of this paper is to suggest interpretation of space applied by color structure, and this point of view was based on the three elements of color perception which are light source, reflector, and observer. According to this categorization, architectural color of exterior color, layer color and interaction color are explained via examples of colors recently used on the contemporary architectures. In summary, contemporary architecture can be explained by Non-construction space interpretation for intrinsic complex meanings. Therefore, it can be explained as moving space, collage, by picturesque space, moving blur color and emptiness of color. This pursues various point of views for space interpretation, therefore it can be developed to the identity of strengthening architectures' design concept.

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.214-220
• /
• 2017

A wavelength filter based on a polymer Bragg reflector has received much attention due to its simple structure and wide tuning range. Tilted Bragg gratings and asymmetric Y-branches are integrated to extract the reflected optical signals in different directions. To optimize device performance, design procedures are thoroughly considered and various design parameters are applied to fabricated devices. An asymmetric Y-branch with an angle of $0.3^{\circ}$ produced crosstalk less than -25 dB, and the even-odd mode coupling was optimized for a grating tilt angle of $2.5^{\circ}$, which closely followed the design results. Through this experiment, it was confirmed that this device has a large manufacturing tolerance, which is important for mass production of this optical device.

• Journal of electromagnetic engineering and science
• /
• v.17 no.1
• /
• pp.14-19
• /
• 2017

In this paper, a planar directional beam-switchable antenna with four orthogonal beam directions is proposed. The proposed antenna is designed with two crossed active elements and two parasitic elements for each direction. The design methodology is described on the basis of the Yagi-Uda method for the active and parasitic elements, respectively. By adjusting the effective electric lengths of the parasitic elements, the roles of a director and a reflector are exchanged with each other. The planar four-way beam-switchable Yagi-Uda antenna is implemented. From the experimental results. The proposed design method is verified for orthogonal radiation beam switching.