• Current Optics and Photonics
• /
• v.4 no.4
• /
• pp.353-360
• /
• 2020

Adopting an elaborately designed reflective objective consisting of four mirrors, we have developed a rotating-polarizer-type microspot spectroscopic ellipsometer (SE) with an ultra-small spot size. The diameter of the focused beam, whether evaluated using a direct-image method or a knife-edge method, is less than 8.4 ㎛. After proper correction for the polarizing effect of the mirrors in the reflective objective, we unambiguously determine the dispersion of the complex refractive index and the thickness of monolayer MoS₂ using the measured microspot-spectroellipsometric data. The measured ellipsometric spectra are sensitive enough to identify small variations in thickness of MoS₂ flakes, which ranged from 0.48 nm to 0.67 nm.

• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.166-170
• /
• 2002

Reflectors for reflective LCDs must be designed to be able to control the direction of the image and the viewing angle range for optimal display. In this paper, we tried to optimize the reflector for reflective LCDs. The conventional surface structures showed many defects and problems. Therefore we made efforts to improve the surface structures of the conventional reflectors through both a theoretical approach and analytic work. As a result, we proposed surface structures which showed almost uniform reflectance within the viewing angle range specified by a user even at any oblique incidence. By using Beckmann's equations, we could check the reflective property of the proposed surface structures.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.428-432
• /
• 2013

This research presents a flexible reflective thermochromic display (TCD) comprised of thermochromic pigments and a patterned indium tin oxide (ITO) film coated on a polyethylene naphthalate (PEN) substrate, and the display's thermo-optical characteristics. The display showed maximum red, green, and blue reflectances of 30%, 38%, and 29%, respectively. Furthermore, the display exhibited a continuous grey color when the temperature was changed continuously. As a flexible display, the display showed reliable thermo-optical performance without image damage even when highly bent. We expect the proposed TCD will be used in outdoor information display applications where low cost is a key factor.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.227-235
• /
• 2019

With slimmer, lighter and all-reflective imaging systems in high demand for consumer and military applications, coaxially folded optical image systems are widely considered because they can extend focal length and reduce track length. Most of these systems consist of multiple surfaces, and these surfaces are machined on one element or grouping processing on two elements. In this paper, we report and first experimentally demonstrate an all-aluminum all-reflective optical system which consists of two optical elements, with two high order aspherical surfaces in each element. The coaxially folded system is designed with Seidel aberration theory and advanced optimization with Zemax. The system is made of all-aluminum material processing by single point diamond turning (SPDT). On this basis, we completed the system integration and performed an imaging experiment. The final system has the advantages of short track length and long focal length and broad application prospects in the micro-unmanned aerial vehicle field.

• International journal of advanced smart convergence
• /
• v.10 no.2
• /
• pp.45-52
• /
• 2021

The surveillance camera market has developed and plays an important role in the field of video surveillance. However, in recent years, the identification of areas requiring surveillance has been limited by reflective light in the surveillance camera market. Cameras using polarization filters are being developed to reduce reflective light and facilitate identification. Programs are required to automatically adjust polarization filters. In this paper, we proposed an optimal angle extraction method from surveillance cameras using polarization filters through histogram analysis. First of all, transformed to grayscale to analyze the specifications of frames in multiple polarized angle images, reducing computational throughput. Then we generated and analyzed a histogram of the corresponding frame to extract the angle when the highlights are the fewest. Experiments with 0˚ and 90˚ showed high performance in extracting optimal angles. At this point, it is hoped this technology would be used for surveillance cameras in place like beach with a lot of reflective light.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.834-848
• /
• 2013

To effectively use these functions many kinds of human-phone interface are used such as touch, voice, and gesture. However, the most important touch interface cannot be used in case of hand disabled person or busy both hands. Although eye tracking is a superb human-computer interface method, it has not been applied to smartphones because of the small screen size, the frequently changing geometric position between the user's face and phone screen, and the low resolution of the frontal cameras. In this paper, a new eye tracking method is proposed to act as a smartphone user interface. To maximize eye image resolution, a zoom lens and three infrared LEDs are adopted. Our proposed method has following novelties. Firstly, appropriate camera specification and image resolution are analyzed in order to smartphone based gaze tracking method. Secondly, facial movement is allowable in case of one eye region is included in image. Thirdly, the proposed method can be operated in case of both landscape and portrait screen modes. Fourthly, only two LED reflective positions are used in order to calculate gaze position on the basis of 2D geometric relation between reflective rectangle and screen. Fifthly, a prototype mock-up design module is made in order to confirm feasibility for applying to actual smart-phone. Experimental results showed that the gaze estimation error was about 31 pixels at a screen resolution of $480{\times}800$ and the average hit ratio of a $5{\times}4$ icon grid was 94.6%.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.82-86
• /
• 1990

A camera type optical bench system equipped with a lens collimator and an image analyzer is fabricated to measure the equivalent focal length and distortion of lenses. This system is automatized by the computer which controls stepping motors. A nodal slide optical bench system equipped with an off axis reflective collimator is fabricated and improved by using rotating arms and air bearing system. distortion measurement on a wide angle lens using the camera method and the nodal slide method is reported. Defocusing error in the distortion measurement with the nodal slide optical bench is analyzed and improved by iteration method to search the correct image point.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1739-1741
• /
• 2007

A 3D projection display using stacked screens to display the near and far images, respectively, is developed. The front screen is made of a scattering polarizer film, and the far image on the rear screen is clearly visible through it. The image is perceived as three-dimensional, and no eyestrain is suffered.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.13-19
• /
• 2015

In this paper, the principle of devices which can magnify images without distorting the images is described. When the device is put on a smart phones, viewers can see the magnified images. Magnified images can be few 100 times bigger than the original images. Therefore, viewers can see movie theater size images with the device put on a smart phone. Two different schemes are explained in the paper and one realization of the device is presented. The device can be used in many different application areas.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.6
• /
• pp.1136-1142
• /
• 2010

In this study, an efficient removal algorithm for specular reflections in a tooth color image is proposed to minimize the artefact interrupting color image segmentation. The pixel values of RGB color channels are initially reversed to emphasize the features in reflective regions, and then those regions are automatically detected by utilizing perceptron artificial neural network model and those prominent intensities are corrected by applying a smoothing spatial filter. After correcting specular reflection regions, multiple seeds in the tooth candidates are selected to find the regional minima and MCWA(Marker-Controlled Watershed Algorithm) is applied to delineate the individual tooth region in a CCD tooth color image. Therefore, the accuracy in segmentation for separating tooth regions can be drastically improved with removing specular reflections due to the illumination effect.