• Korean Journal of Optics and Photonics
• /
• v.22 no.3
• /
• pp.151-158
• /
• 2011

This paper reports design and demonstration of optical systems for reflective-type remote optical displacement sensors. Optical systems for light illumination sources and a position sensitive detector (PSD) for the displacement sensor were developed to sense displacement of bridges and instability of skyscrapers in a distance range from 10 m to 250 m to an accuracy better than a few mm. Performance of the optical systems was verified by composing a displacement sensor and by using it in measurement of displacement of a remote target with proper reflective optics depending on distance. The displacement sensor was composed of two LED light sources, each with collimating optics, and a two-dimensional PSD with telescope-type optics. Its displacement resolutions was measured to be 0.1 mm at a distance of 10 m and less than 3 mm at a distance of 250 m.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.1950-1958
• /
• 2024

For the pressurized water reactor two-step calculation, the traditional assembly homogenization and two-group neutron diffusion calculation have been widely used. When it comes to the core pin-by-pin simulation, many models and techniques are different and unsettled. In this paper, the homogenization methods based on the pin discontinuity factors and super homogenization factors are used to get the pin-cell homogenized parameters. The heterogeneous leakage model is applied to modify the infinite flux spectrum of the single assembly with reflective boundary condition and to determine the diffusion coefficients for the SP3 solver which is used in the core simulation. To reduce the environment effect of the single-assembly reflective boundary condition, the online method for the SPH factors updating is applied in this paper, and the functionalization of SPH factors based on the least-squares method will be pre-made alone with the table of the group constants. The fitting function will be used to update the thermal-group SPH factors with a whole-core pin-by-pin homogeneous solution online. The three-dimensional Watts Bar Nuclear Unit 1 (WBN1) problem was utilized to test the performance of pin-by-pin calculation. And numerical results have demonstrated that PWR pin-by-pin core calculation has more accurate results compared with the traditional assembly-homogenization scheme.

• The Research Journal of the Costume Culture
• /
• v.2 no.2
• /
• pp.445-460
• /
• 1994

This paper analyzes Empire style costume based on the fashion theory of Lauer and Lauer. We classify fashion into tow categories, a personal identities, the social competition and sexual competition, he economic factor as a functional factor, and the reflective thing of zeitgeist, eroticism as a dynamic factor. These factors can be visualized from fashion design, textiles, ornaments expressed in the paintings.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.210-211
• /
• 2004

• Journal of electromagnetic engineering and science
• /
• v.6 no.2
• /
• pp.110-116
• /
• 2006

A reflective array type surface acoustic wave(SAW) dispersive delay line(DDL) with high time-bandwidth at the V/UHF-band is designed and fabricated for compressive receiver applications. This type of the SAW DDL has the properties of the relative bandwidth of 20 %, the time delay of 49.89 usec, the insertion loss of 38.5 dB and the side lobe rejection of 39 dB. In comparison with a commercial SAW DDL, the insertion loss, amplitude ripple and side lobe rejection are improved by $1.5dB{\pm}0.6dB$ and 4 dB respectively. Using the fabricated SAW DDL, the prototype of the compressive receiver is developed. It is composed of RF converter, fast tunable LO, chirp LO, A/D converter, signal processing unit and control unit. This prototype system shows a fine frequency resolution of below 30 kHz with high scan rate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.153-156
• /
• 2004

We have studied electro-optic characteristics of transflective liquid crystal display (LCD) using in-plane switching mode. Unlike previous transflective LCD using a dual gap structure and multi driving circuit, this transflective LCD has a single gap structure and a single driving circuit. In the voltage on state, the electric field is applied horizontally to the LC directors, and then homogeneously aligned LC directors at initial state is rotated to with the electric field. But the twist angle of the LC directors in reflective area is lower than transmissive area. As a result, it is possible to design the transflective LCD with a single gap and a single driving circuit. The transflective display associated with this LC cell exhibits a wide viewing angle in both reflective and transmissive areas.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.7
• /
• pp.62-70
• /
• 1997

In this paper, the optical conditins of a reflective multi-color STN-LCD based on electrical control of birefringence is designed on the poincare sphere. First of all, the angles of polarizer and analyzer for the best color purity are decided in the configuration without a retardation film. A retardation film is introduced for a bright white in the range of the applied voltage. The sretardation and the angle of the retardation film are also decided on the poincare shpere. The test cell is farbricated and its measured spectral transmittance and the CIE chromaticity diagram agree well with simulations.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1068-1071
• /
• 2007

When a dielectric layer, in-cell retarder (ICR) is formed between electrode and LC layer to get a single gap transflective fringe-field switching (FFS) display, the operating voltage ($V_{op}$) is highly increased due to the thickness of dielectric material. But, we also knew the phenomenon that the increasing rate of Vop is different whether the 1st common electrode was composed of plate type or slit type. In this paper, the common electrode in transmissive part was composed of slit type which had less steepness effect of the Vop and in reflective part was composed of plate type. The rubbing angle of reflective part can be adjusted properly to match the voltage dependent transmittance and reflectance.

• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.279-282
• /
• 1999

We designed and fabricated a single polarizer mode bistable twisted nematic liquid crystal display by employing a wide-band λ/4 retardation film to enhance the dark state property. We theoretically and experimentally confirmed the necessity of a wide- band λ/4 retardation film in a single polarizer mode. We obtained brighter image than previous reflective BTN LCDs.

• Journal of Korea Multimedia Society
• /
• v.18 no.5
• /
• pp.663-670
• /
• 2015

In this study, I have researched the theories about Gibson's real affordance and Norman's perceived affordance which are central fact of affordance, And I have examined the context of affordance in smart-phone interface which was consist of affordance and signifier with viewpoint of amalgamation of Gibson & Norman. The results of this study are as follows; The first, Gibson's real affordance is a physical space in ubiquitous environment that interact through the behavioral space is composed with physical space and electronic space. Norman's perceived affordance is mediated to electronic space and signifier makes a behaviroal space which provide the clue of interaction. The second, signifier can be categorized into visceral, behavioral and reflective signifier based on three brain actions which are visceral, behavior, and reflection. Through the categorization, we can grasp that behavioral and reflective signifies generate visceral signifier. The third, the context of affordance in smart-phone has the structure of circulation. The structure of circulation is as follows: Real affordance makes the perceived affordance, the perceive affordance makes the signifiers and the signifiers make new real affordance. This study could provide the theoretical basis for using signifier in smart-phone interface design.