• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.435-436
• /
• 2007

In general, Single gap transflective FFS display has an in-cell retarder (ICR) between reflective electrode and liquid crystal (LC) layer. Therefore, Operating voltage is highly increased due to this thick dielectric material. But, we also knew the phenomenon that the increasing rate of Vop is different whether the 1st common electrode was composed of plate type or slit type. In this paper, the common electrode in transmissive part was composed of slit type which had less steepness effect of the V op and in reflective part was composed of plate type. The rubbing angle of reflective part can be adjusted properly to match the voltage dependent transmittance and reflectance.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.227-235
• /
• 2019

With slimmer, lighter and all-reflective imaging systems in high demand for consumer and military applications, coaxially folded optical image systems are widely considered because they can extend focal length and reduce track length. Most of these systems consist of multiple surfaces, and these surfaces are machined on one element or grouping processing on two elements. In this paper, we report and first experimentally demonstrate an all-aluminum all-reflective optical system which consists of two optical elements, with two high order aspherical surfaces in each element. The coaxially folded system is designed with Seidel aberration theory and advanced optimization with Zemax. The system is made of all-aluminum material processing by single point diamond turning (SPDT). On this basis, we completed the system integration and performed an imaging experiment. The final system has the advantages of short track length and long focal length and broad application prospects in the micro-unmanned aerial vehicle field.

• International journal of advanced smart convergence
• /
• v.10 no.2
• /
• pp.45-52
• /
• 2021

The surveillance camera market has developed and plays an important role in the field of video surveillance. However, in recent years, the identification of areas requiring surveillance has been limited by reflective light in the surveillance camera market. Cameras using polarization filters are being developed to reduce reflective light and facilitate identification. Programs are required to automatically adjust polarization filters. In this paper, we proposed an optimal angle extraction method from surveillance cameras using polarization filters through histogram analysis. First of all, transformed to grayscale to analyze the specifications of frames in multiple polarized angle images, reducing computational throughput. Then we generated and analyzed a histogram of the corresponding frame to extract the angle when the highlights are the fewest. Experiments with 0˚ and 90˚ showed high performance in extracting optimal angles. At this point, it is hoped this technology would be used for surveillance cameras in place like beach with a lot of reflective light.

• Current Optics and Photonics
• /
• v.5 no.1
• /
• pp.40-44
• /
• 2021

In this paper, LED arrays with segmented mirrors and a mask are presented as a new dark-field illuminator for reflective Fourier ptychographic microscopy (FPM). The illuminator can overcome the limitations of the size and the position of samples that the dark-field illuminator using a parabolic mirror has had. The new concept was demonstrated by measuring a USAF 1951 target, and it resolved a pattern in group 10 element 6 (274 nm) in the USAF target. The new design of the dark-field illuminator can enhance competitiveness of the reflective FPM as a versatile measurement method in industry.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.67-68
• /
• 2023

This paper reports on the synthesis of paraffin-based phase change materials (PCMs) designed for use in solar reflective paint (SRP) as a thermal energy storage (TES) medium. These PCMs are prepared using the sol-gel process and are encapsulated in silica. The focus of this research is to evaluate the suitability of these synthesized PCMs for efficient thermal energy storage within SRP applications. The obtained PCMs have nanometric dimensions, which make them well-suited for integration into paint formulations. The study also includes a thorough analysis of the chemical, thermal, and structural stabilities of these materials, confirming their applicability in solar reflective paint.

• The Journal of Korean Society for Radiation Therapy
• /
• v.22 no.1
• /
• pp.25-32
• /
• 2010

Purpose: In radiotherapy that takes into account respiration using a RPM (Real time Position Management, Varian, USA) system, which can treat in consideration of the movement of tumor, infrared reflective markers supplied by manufacturers cannot obtain respiratory signal if the couch rotates at a certain angle or larger. In order to solve this problem, the author developed the 3D infrared reflective marker named 'Kw-marker' that can obtain respiratory signal at any angle, and evaluate its usefulness. Materials and Methods: In order to measure the stability of respiratory signal, we put the infrared reflective marker on the 3D moving phantom that can reproduce respiratory movement and acquired respiratory signal for 3 minutes under each of 3 conditions (A: $couch\;0^{\circ}$, a manufacturer's infrared reflective marker B: $couch\;0^{\circ}$, Kw-marker C: $couch\;90^{\circ}$, Kw-marker). By analyzing the respiratory signal using a breath analysis program (Labview Ver. 7.0), we obtained the peak value, valley value, standard deviation, variation value, and amplitude value. In order to examine the rotation error and moving range of the target, we placed a B.B phantom on the 3D moving phantom, and obtained images at a couch angle of $0^{\circ}$ and $90^{\circ}$ using OBI, and then acquired the X, Y and Z values (mm) of the ball bearing at the center of the B.B phantom. Results: According to the results of analyzing the respiratory signal, the standard deviation at the peak value was A: 0.002, B: 0.002 and C: 0.003, and the stability of respiration for amplitude was A: 0.15%, B: 0.14% and C:0.13%, showing that we could get respiratory signal stably by using the Kw-marker. When the couch rotated $couch\;90^{\circ}$, the mean rotation error of the ball bearing, namely, the target was X: -1.25 mm, Y: -0.45 mm and Z: +0.1 mm, which were within 1.3 mm on the average in all directions, and the difference in the moving range of the target was within 0.3 mm. Conclusion: When we obtained respiratory signal using the Kw-marker in non-coplanar treatment where the couch rotated, we could acquire respiratory signal stably and the Kw-marker was effective enough to substitute for the manufacturer's infrared reflective marker. When the rotation error and moving range of the target were measured, there was little difference, indicating that the displacement of the reflector movement in couch rotation is the cause of change in the scale and amplitude of respiratory signal. If the converted value of amplitude height according to couch angle is studied further and applied, it may be possible to perform non-coplanar phase-based gating treatment.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.91-97
• /
• 2014

In this research, we would try to evaluate the applicability in cadastral resurvey surveying by analysing the accuracy of building boundary surveying using the reflective sheet total station surveying. When we analyse it, we refer the reflective sheet which can supplement not only the difficulties of total station surveying and GPS surveying caused by the diversity of the building structure but also the errors of non prism total station caused by material of the object. Each reflected angles $90^{\circ}$ and $60^{\circ}$, $30^{\circ}$ of RMSE results were analyzed by RMSE between 1.2mm~2.8mm and 2.2mm~4.0mm, 2.5mm~4.4mm for each distance. The result of X RMSE was analyzed to be 0.0043m in a boundary surveying for existing building between prism surveying and reflective sheet surveying, and also Y RMSE was 0.038m. The source of error is estimated that the body of the prism can not be exactly attached to the edge of a building. Therefore, it will be very helpful to use a reflective sheet surveying with a prism in both the limit of collimation and error reductions as a building boundary measurement in cadastral resurvey surveying.

• Journal of The Korean Association For Science Education
• /
• v.32 no.1
• /
• pp.146-159
• /
• 2012

The purpose of this study was to examine the relation between students' reflective thinking and providing the reading framework in implementation of argument-based inquiry using the Science Writing Heuristic (SWH) approach. Participants of this study were 60 $8^{th}$ grade students (two classes). One class (31 students) was assigned to an experimental group and the other class (29 students) was assigned to a comparative group. For the experimental group, five activities using the reading framework with SWH writing template were implemented, while three activities using the reading framework with the SWH writing template and two SWH activities without the reading framework were implemented for the comparative group. The result of this study showed that there was no significant difference in students' reflective thinking between both groups. However, results indicated that providing the reading framework with SWH approach facilitated students' reflective thinking. Therefore, the findings show that providing the reading framework consistently in the SWH approach was effective when it came to facilitating students' reflective thinking.

• Korean Journal of Social Welfare Studies
• /
• v.48 no.2
• /
• pp.203-231
• /
• 2017

The purpose of this study is to examine the impact of organizational climate on the resource linking skills of social workers working in community welfare centers as well as the mediating effects of reflective thinking in these relationships. To test the mediating effects, we set up a research model based on previous studies on the organizational climate, resource linkage skills, and reflective thinking of social workers. The subjects of this study were social workers in community welfare centers in the Busan metropolitan city. Data were collected using mail surveys, and data from 526 respondents were used for the final analysis. The main results are as follows. First, the organizational climate of community welfare centers has a statistically significant impact on social workers' resource linkage skills. In other words, the more the social workers recognize positively about the organizational climate, the more the utilization of resource linkage skills increases. Second, reflective thinking has a mediating effect in the relationship between the organizational climate and resource linkage skills of social workers in community welfare centers. Based on the study results, practical suggestions for improved resource linkage skills and reflective thinking of social workers in community welfare centers were suggested, and practical implications and future research were discussed.

• Korean Journal of Child Education & Care
• /
• v.19 no.3
• /
• pp.13-30
• /
• 2019

Objective: The purpose of this study is to analyze the annual operational status in the filed of art shown in daily teaching plan for 2-year old, provide the analysis results helping the reflective cognition and to provide the basic data for relevant researches. Methods: This study analyzed the 1 year portion of daily teaching plan of 6 edu care teachers, provided the analysis results to the teacher in charge and promote the reflective cognition. Results: First, the operational status of the art area shown in the daily teaching plan for 2-year old was analyzed by dividing it into arts experience, expression type, art supplies, basic planar material, planar painting material, three-dimensional expression material. Second, The reflective cognition in the teacher on the analysis results of operational status in the field of art for 2-year old was shown as limits such as the infant art missing art appreciation, concentration on art supplies, ambiguity of infant art and the uniformed art activity. Conclusion/Implications: The implications of this study are the facts that it identified the operational concentration in the field of art for 2-year old, it utilized the analysis data of the teacher's daily teaching plan as reflective cognition tell, it showed the diverse teacher's cognitions on the infant-oriented art education not the uniformed art activity application.