• Korean Membrane Journal
• /
• v.5 no.1
• /
• pp.61-67
• /
• 2003

Various characteristics of ion transport properties of a charged mosaic membrane with a parallel array of positive and negative functional charges were investigated, From the analysis of the volume flux, it was found that the salt flux based on nonequilibrium thermodynamics, preferential salt transport across the charged mosaic membrane. Transport properties of the magnesium sulfate(MgSO$_4$) and sucrose across the charged mosaic membrane were estimated. As a result, metal salts transport depended largely on the charged states and molecular weight otherwise nonelectrolyte solution was rejected under all experimental conditions. On the other hand, the reflection coefficient s indicated the negative value that suggested preferential material transport and was independent of charged mosaic thickness.

• ETRI Journal
• /
• v.39 no.6
• /
• pp.813-819
• /
• 2017

A slotted rectangular nameplate antenna design with a patch bearing the name of the first author is presented. A $6.8mm{\times}26mm{\times}1.6mm$ substrate of FR-4 epoxy material having a relative permittivity of 4.4 and a dielectric loss tangent of 0.02 is used. Additionally, the feeding technique used is a coaxial mechanism. The standard antenna design parameters, including the reflection coefficient, bandwidth, radiation pattern, gain, directivity, and voltage standing wave radio (VSWR) for the proposed prototype are analyzed using a high-frequency structure simulator (HFSS) v-15, and are compared to the measured results. The designed structure may be considered for different satellite- and radio-determination applications at the respective resonant frequencies.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.1
• /
• pp.99-104
• /
• 1998

It is a good flexibility of bending body and non-interaction of outer bodies for slit antenna to be being studied and developed in this paper. The characteristics of leaked EM waves in slit transmission line are applied to antennas of tele-communication systems. The computer simulations using a special software adapt to design a new slit antenna, and to apply to tele-communications systems with frequencies of land mobile communication (800-900MHz). The good results of which reflection coefficient 511 is 0.21 and directivity is 2.9 and band-widths are 1.5MHz in 851MHz are shown.

• Journal of electromagnetic engineering and science
• /
• v.11 no.3
• /
• pp.227-233
• /
• 2011

This paper describes the development of a broadband quasi-Yagi antenna using a folded dipole driver. The antenna is designed on a low-permittivity substrate to reduce the surface wave effect, and hence the gain can be enhanced easily by adding directors. The folded dipole driver is connected to a 50-${\Omega}$ microstripline via a simple broadband microstrip-to-coplanar stripline transition with a quarter radial stub. The key motivation for the use of a folded dipole is to increase the input impedance at the driver, allowing a smaller mismatch loss between the antenna driver and the coplanar stripline feed. The proposed antenna has a measured bandwidth of 4.67~6.26 GHz for the -10 dB reflection coefficient, and a flat gain of 4.86~5.15 dB within the bandwidth.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.85-89
• /
• 2004

The wave interactions with fully submerged and floating dual buoy/vertical porous membrane breakwaters has been investigated in experimentally to validate the developed theory and numerical method in the previous study, in which multi-domain hydro-elastic formulation was carried out in the context of linear wave-body interaction theory and Darcy's law. It is found that the experimental results agrees well with the numerical prediction. Transmission and reflection can be quite reduced simultaneously especially in the region of long waves. The properly tuned system to incoming waves can effectively dissipate wave energy and also offset each other between incident and scattered waves using its hydro-elasticity and geometry.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1158-1165
• /
• 2004

This paper describes the design of a two stage 1V power supply SiGe Low Noise Amplifier operating at 5.25㎓ for 802.lla wireless LAN application. The achieved performance includes a gain of 17㏈, noise figure of 2.7㏈, reflection coefficient of 15㏈, IIP3 of -5㏈m, and 1-㏈ compression point of -14㏈m. The total power consumption of the circuit was 7㎽ including 0.5㎽ for the bias circuit.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.509-512
• /
• 1995

The relaying algorithm to calculate the fault distance from only transient signal at faults in T/L is presented. In this paper. At faults the oscillation frequency components exist in both voltage and current and these components minimize the input impedance shown in fault point. The equivalent source impedance shown in relaying point is needed to calculate the fault distance using these components. To source impedance, the reflection coefficient between forward wave and backward and the Prony's analysis is also employed to extract the oscillation frequency component from transient signals. The case study show that the new distance relaying algorithm satisfies the high operation speed and high accuracy even if the algorithm uses only transient signals.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.73-74
• /
• 2016

In this paper, a design method for a wideband square loop antenna for Digital TV applications is studied. The proposed loop antenna is a square loop antenna combined with circular sectors to connect with central feed points. The input reflection coefficient and gain characteristics of the proposed antenna are analyzed to match with the 75 ohm input impedance for DTV applications. The optimized antenna is designed on FR4 substrate, and it operates in the frequency band of 470-1,300 MHz for a VSWR < 2, which assures the operation in the DTV band(470-806 MHz).

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1871-1873
• /
• 2000

There are many electrical accidents between bare wire and line post insulator which is degraded by long time using, causing leakage current on the surface of insulator. In this paper it is presented that the 22.9 Kv-y distribution lines are protected by binding cover which is needed from fog or rainy moisture, surges occurring by switching or lightening pulse. It is analyzed to investigate the unbalanced transfer characteristics and reflection coefficient by using binding cover and non-cover. It was tested the radio interference voltage in the test room and electric field strength by calculation between binding cover and non-cover. In the factory the leakage current causing on the surface of insulator was tested in the state of light load and heavy load.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.4 no.3
• /
• pp.9-18
• /
• 1967

Analytic results, valid at resonance, for the admittance properties of an edge shunt slot on the narrow wall of rectangular waveguide have been derived by the use of electromagnetic field equations. Furthermore, additional formulas for the reflection, transmission coefficient and voltage amplitude generated by given incident wave are described. Finally, the measured results are compared with the theoretical values. It was found that the measured results were consistent with the theoretical results. Also the errors between computed and measured data are described.