• 대한전자공학회논문지SD
• /
• 제40권8호
• /
• pp.572-579
• /
• 2003

vertical-cavity surface-emitting laser(VCSEL) 웨이퍼에서 측정한 반사 스펙트럼을 전달 매트릭스 방법으로 계산한 반사스펙트럼과 비교함으로써 비파괴적인 방법으로 구조적인 두께 오차가 발생한 층을 찾아 내고 오차의 크기를 추정하는 방법론을 제시하였다. DBR 층의 오차를 종합하여 나타낸 n-DBR 층의 두께 오차, 즉 유효 오차를 도입하면, 반사 스펙트럼의 모양은 유효 오차에만 의존한다는 사실에 이 방법의 근거를 두고 있다. 활성층 영역의 두께 오차는 Fabry-Perot 발진파장에만 영향을 주며, 랜덤 두께 오차의 표준 편차 값이 0.005 이하일 때에 측정과 계산된 반사 스펙트럼의 비교는 신뢰성을 갖는다. 이 방법론은 VCSEL 웨이퍼 제작시 측정되는 반사 스펙트럼을 이용하므로 비파괴적이며, 0.5 nm의 두께 오차를 찾아 낼 수 있을 정도로 정밀도가 높다.

• 센서학회지
• /
• 제13권5호
• /
• pp.342-349
• /
• 2004

SK (SPR Kinds) index, which can categorize the complicated measurement methods of surface plasmon resonance by simple method, has been proposed and verified. SK index is composed of three digits, where each digit presents the type of immobilized ligand, the type of illumination and the kinds of varying parameter, sequentially. The measurement method of (33#) series among SK indices shows the possibility of the multi-sensing capability, by which the response of 2-dimensional array of immobilized ligands can be detected simultaneously. The proposed possibility of multi-sensing capability has been verified by the modeling that is based on Fresnel reflection model.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.101-108
• /
• 2019

In this study, the hole-cavity resonance technology and the micro pore stainless chip sintering technology were fused to develop silencers with excellent noise attenuation performance even at fluid pressures exceeding 30 bar for the first time at home and abroad. As a result of this study, the noise attenuation performance was greatly improved as reflection, loss, and resonance were made to occur thousands of times simultaneously when fluids pass through the sintered micro pore stainless steel chip sound absorber. The noise of the gas emitted from the bomb without the silencer was shown to be 125dB. And noise test conducted after installation of the silencer showed the noise of 67dB. Given the study results, the amount of noise was greatly reduced in the sintered silencer.

• International Journal of Fluid Machinery and Systems
• /
• 제6권2호
• /
• pp.75-86
• /
• 2013

The effects of acoustic resonance and volute geometry on phase resonance are studied theoretically and experimentally using a centrifugal fan. One dimensional theoretical model is developed taking account of the reflection from the discharge pipe end. It was found that the phase resonance occurs, even with the effects of acoustic resonance, when the rotational speed of rotor-stator interaction pattern agrees with the sound velocity. This was confirmed by experiments with and without a silencer at the discharge pipe exit. The pressure wave measurements showed that there are certain effects of the cross-sectional area change of the volute which is neglected in the one dimensional model. To clarify the effects of area change, experiments were carried out by using a ring volute with a constant area. It was demonstrated that the phase resonance occurs for both interaction modes travelling towards/away from the volute. The amplitude of travelling wave grows towards the volute exit for the modes rotating towards the volute exit, in the same direction as the impeller. However, a standing wave is developed in the volute for the modes rotating away from the volute exit in the opposite direction as the impeller, as a result of the interaction of a growing wave while travelling towards the tongue and a reflected wave away from the tongue.

• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.11-19
• /
• 2016

By incorporating a polarization-diversity loop configuration, we have demonstrated the inline switching of transmission and reflection spectra of one of two short-period fiber gratings (SPFGs) with different resonance wavelengths without reconfiguring the filter structure. The proposed filtering apparatus consists of a fiber-pigtailed polarization beam splitter, two SPFGs, and three quarter-wave plates (QWPs). The proposed filter can independently choose the transmission or reflection spectrum of each SPFG through the appropriate adjustment of the orientation angles of the QWPs within the filter without additional optical switches and couplers. The average insertion loss, band rejection ratio, and side-mode suppression ratio of the fabricated filter were measured as ~4.59, ~17.88, and ~19.67dB, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.673-676
• /
• 2003

This paper describes the modeling and experimental results for Bulk Acoustic Wave(BAW) Resonator using PolyVinyliDene Fluoride(PVDF). We measured the input reflection coefficient ($S_{11}$) of resonators using vector network analyzer and experimental results were measured fundamental resonance at 2.3 GHz with a return loss of -29 dB. Because of fabricated resonator without etching process, we can confirm a possibility of resonator application as using a PVDF.

• ETRI Journal
• /
• 제34권2호
• /
• pp.210-215
• /
• 2012

In this paper, a group delay time controller (GDTC) is proposed based on a reflection topology employing a parallel resonator as the reflection termination. The design equations of the proposed GDTC have been derived and validated by simulation and experimental results. The group delay time can be varied by varying the capacitance and inductance at an operating frequency. To show the validity of the proposed circuit, an experiment was performed for a wideband code division multiple access downlink band operating at 2.11 GHz to 2.17 GHz. According to the experiment, a group delay time variation of $3{\pm}0.17$ ns over bandwidth of 60 MHz with excellent flatness is obtained.

• 대한전자공학회논문지
• /
• 제6권1호
• /
• pp.12-18
• /
• 1969

도피관내 프라즈마상태를 발생시켜 외부자계를 마이크로파 전계에 수평 및 수직되게 가하여 그 때 일어나는 마이크로파 반사전력 및 투과전계를 측정하였다. 마이크로파 전계와 외부자계가 수평인 경우 외부자속밀도가 증가할 수록 감쇠만 일어났으나 서로 수직인 경우에는 3120가우스에서 반사전력이 최대로 되어 공진현상이 일어났다.

• 통합자연과학논문집
• /
• 제6권2호
• /
• pp.82-86
• /
• 2013

This paper describes a method for the preparation of porous polymethylmethacrylate showing optical reflectivity from the porous silicon template. A porous polymethylmethacrylate showing optical reflectivity was prepared by replicating porous silicon template which was obtained by applying a computer-generated periodic square current density and resulted in a mirror with high reflectivity in a specific narrow spectral region. A porous polymethylmethacrylate showing an excellent reflectivity was successfully obtained by dissolving the Porous silicon template from the porous polymethylmethacrylate composite film. A porous polymethylmethacrylate exhibited a sharp reflection resonance in the reflectivity spectrum. Surface image of the porous polymethylmethacrylate indicated that the surface of the porous polymethylmethacrylate film had a porous structure. These porous polymethylmethacrylate films in aqueous solutions were stable for several days without any degradation.

• 한국항행학회논문지
• /
• 제15권6호
• /
• pp.1008-1014
• /
• 2011

본 논문에서는 WLAN 대역과 WiMax 대역에서 통신을 가능하게 하기 위한 다중대역 프랙탈 마이크로스트립 패치 안테나를 설계 및 제작하였다. 제안된 안테나는 다중공진을 위해 공진주파수, 임피던스정합, 극성 및 방사패턴을 훌륭히 제어할 수 있으며 다중 독립 주파수를 만족시키기 위한 세 개의 반원의 프랙탈 패치를 삽입하였다. 제안된 구조는 반원의 프랙탈 구조가 연속적으로 이루어져 있는 형태의 안테나로써 하나의 반원이 하나의 대역을 나타내고 있다.