• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.93-94
• /
• 2000

In this work, we proposed a reflective antiferroelectric liquid crystal display (AFLCD) using a half-wave cell whose tilt angle is $22.5^{\circ}$. To check the validity of our design, we fabricated a reflective half-wave AFLC cell of which tilt angle is $24.9^{\circ}$, and measured viewing angle dependent reflectance and VIS reflection spectra. In the results, the half-wave AFLC cell in the reflective configuration exhibits high brightness, high contrast ratio of 20:1.

• Journal of Magnetics
• /
• v.12 no.4
• /
• pp.141-143
• /
• 2007

We have fabricated (0001) oriented hexagonal $HoMnO_3$ thin films with thickness of 300 nm using Pulsed Laser Deposition (PLD) technique on $Pt(111)/Ti/SiO_2/Si$ substrates. The XRD $\theta-2\theta$ pattern shows only (0002), (0004), and (0008) reflection of a hexagonal phase, and the full width at half maximum (FWHM) of (0004) peak is under $1.6^{\circ}$. The chemical state of Mn from XPS spectra of the films reveals the presence of $Mn^{3+}$ only. The temperature dependence of dielectric constant shows a weak anomaly at magnetic $N\acute{e}el$ temperature $(T_N)$, which is about 70 K.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.10
• /
• pp.2245-2248
• /
• 2009

This paper demonstrates room temperature chemical vapor deposition (RTCVD) for fabricating titania inverse opals. The colloidal crystals of monodisperse polymer latex spheres were used as a sacrificial template. Titania was deposited into the interstices between the colloidal spheres by altermate exposures to water and titanium tetrachloride (Ti$Cl_4$) vapors. The deposition was achieved under atmospheric pressure and at room temperature. Titania inverse opals were obtained by burning out the colloidal template at high temperatures. The filling fraction of titania was controlled by the number of deposition of Ti$Cl_4$ vapor. The morphology of inverse opals of titania were investigated. The optical reflection spectra revealed a photonic band gap and was used to estimate the refractive index of titania.

• Journal of Integrative Natural Science
• /
• v.3 no.1
• /
• pp.33-37
• /
• 2010

The functionalized photonic crystals of porous silicon biosensor was prepared for the application as a label-free biosensor based on distributed Bragg reflector interferometer. Prepared distributed Bragg reflector of porous silicon biosensor displayed sharp reflection in the optical reflective spectra. The mean of construction of molecular architectures on distributed Bragg reflector of porous silicon surfaces was investigated for the step-by-step binding interaction with amines, biotin, avidin, and biotinylated protein A. The subsequent introduction of avidin, and biotinylated protein A resulted in the reflectivity shifted to longer wavelengths, indicative of a change in refractive indices induced by binding of biomolecules.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.7
• /
• pp.486-492
• /
• 2001

We propose a novel optical channel-selective filter whose center wavelength and bandwidth can be fully controlled. The Proposed filter consists of three identical chirped fiber Bragg gratings (CFBG’s) with fiber stretchers which is to control the reflection spectra of the CFBG’s. We experimentally demonstrate that the proposed tunable filter can select arbitrary channels from a WDM signal.

• Journal of the Korean Ceramic Society
• /
• v.30 no.12
• /
• pp.1080-1088
• /
• 1993

The residue compounds of sulfuric acid-carbon fiber system were obtained from P100, M40, TZ307, and T300 fibers. The fibers which easily formed intercalation compound had small change of d002 value, but, large change of diameter of fiber. It was considered that the cracks in carbon fiber were due to the this conflicting result. The resistivities of residue compound of carbon fibers were increased with the large change of diameter of fibers. It is thought that the reason of our results is increasing defects such as crack in fibers. From the UV reflection spectra, it was found that reflectances of residue compounds were all decreased and the residue compounds were more stable than intercalation compounds.

• YAKHAK HOEJI
• /
• v.48 no.1
• /
• pp.60-64
• /
• 2004

Near-infrared (NIR) spectroscopy was used to determine rapidly and nondestructively the content of ambroxol in intact ambroxol tablets containing 30 mg (12.5％ m/m nominal concentration) by collecting NIR spectra in range 1100-1750 nm. The laboratory-made samples had 10.3∼15.9％ m/m nominal ambroxol concentration. The measurements were made by reflection using a fiber-optic probe and calibration was carried out by partial least square regression (PLSR) with autoscaling. Model validation was performed by randomly splitting the data set into calibration and validation data set (7 samples as a calibration data set and 5 samples as a validation data set). The developed NIR method gave results comparable to the known values of tablets in a laboratorial manufacturing Process, standard error of calibration (SEC) and standard error of prediction (SEP) being 0.49％ and 0.49％ m/m respectively. The method showed good accuracy and repeatability NIR spectroscopic determination in intact tablets allowed the potential use of real time monitoring for a running production process.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.1
• /
• pp.45-48
• /
• 2014

We have investigated the effects of an Ag capping layer on the emission characteristics of transparent organic light-emitting devices with Ca/Ag double-layer cathodes. The thickness of the Ag layer was varied from 10 to 30 nm, whereas the Ca was fixed to be a 10 nm in the Ca/Ag structure. The luminance and current efficiency on the cathode and anode sides are significantly dependent on the Ag thickness. For example, the current efficiency on the anode side increases from 8.4 to 11.7 cd/A, whereas, on the cathode side, it decreases from 3.2 to 0.2 cd/A as the Ag thickness increases from 10 to 30 nm. These changes in emission characteristics were investigated by measuring electroluminescence, transmission, and reflection spectra.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.5-8
• /
• 1997

A study on the electrical conduction characteristics of the ultrathin organic films is one of the important factors for the development of molecular electronic devices. The Langmuir- Blodgett(LB) technique has recently been attracted interest as a method of the deposition ultrathin films. We hate fabricated N-docosyl N\`-methyl viologen-diTCNQ(DMVT) anion radical LB film and investigated the molecular orientation and electrical conduction characteristics. We have measured infrared transmission-reflection spectra. The alkyl chain is found to he well-ordered with the tilt angle of 13$^{\circ}$ with respect to the substrate surface normal and the TCNQ plane is tilted at 76$^{\circ}$ the surface normal. In ESR spectrum, we confirmed that a half-amplitude linewidth is clearly dependent on the incident angle, which indicates conducting species change. The in-plane conductivity of 31 lagers is approximately 1.33$\times$10$^{-6}$ S/cm. The ohmic behaviour was observed below 0.6 V, when current-voltage(I-V) characteristics was measured verically.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.4
• /
• pp.316-320
• /
• 1995

The incorporation of metal ion into the Langmuir-Blodgett (LB) film of an itaconate copolymer was investigated. The polymer was prepared via radical copolymerization of monooctadecyl itaconate with triethyleneglycol methyl vinyl ether. The metal ions employed were Na+, Cs+, Mg2+, Fe2+, Al3+, and Fe3+. The surface pressure-area isotherms indicated that all the monolayers studied on subphases with metal ions showed more expanded areas than that observed on pure water. The monolayers showed an irreversible collapse behavior. The collapse pressure of the monolayers was low on subphases containing trivalent metal ions. From the FT-IR spectra by reflection and transmission modes, the formation of carboxylate salts and the uprisen orientation of the pendant against substrate surface in the polymer LB film were determined. It was estimated by XPS measurement that ca. 13.1 repeat units of the polymer contain one Na+ ion, while one Mg2+ ion corresponds to 5.9 carboxyls.