• The Journal of the Acoustical Society of Korea
• /
• 제21권4E호
• /
• pp.164-169
• /
• 2002

This paper proposes a hybrid method for vibration analysis in the medium to high frequency ranges using Power Flow Analysis (PFA) algorithm and Statistical Energy Analysis (SEA) coupling concepts. The main part of the developed method is the application of coupling loss factor (CLF) suggested in SEA to the power transmission, reflection coefficients in PI' A boundary conditions. The developed hybrid method shows very promising results with regard to the applications for the various damping loss factors in wide frequency ranges. And also this paper presents the applied results of Power Flow Finite Element Method (PFFEM) by forming the new joint element matrix with CLF to analyze the various plate structures in shape. The analytical results of automobile, complex plate structures show good agreement with those of PFFEM using the PFA coefficients.

• 대한의용생체공학회:의공학회지
• /
• 제5권1호
• /
• pp.55-62
• /
• 1984

A digital spectrum analysis technique was used to estimate the tissue characteristic parameters (transmission velocity and attenuation coefficient) in the phantom study and the human liver's ultrasound scanning. The soft tissue equivalent phantom was made with the combination materials of agar, water, powdered graphite, and n-propyl alcohol. In the human study, twenty five normal subjects and three patients with liver diseases were studied using the ultrasonic reflection signals and the spectrum analysis method The following results were obtained; 1. The soft tissue-equivalent materical could be produced with various acoustic parameters by changing the composition amount of the powdered graphite and n-propyl alcohol. 2. Attenuation coefficients of normal human liver tissue were estimated to be 0. 36 dB/cm MHz$\pm$0.11. In patients with liver disese, tile attenuation coefficients were shown to be different from the above normal values.

• 한국음향학회지
• /
• 제21권4호
• /
• pp.164-164
• /
• 2002

This paper proposes a hybrid method for vibration analysis in the medium to high frequency ranges using Power Flow Analysis (PFA) algorithm and Statistical Energy Analysis (SEA) coupling concepts. The main part of the developed method is the application of coupling loss factor (CLF) suggested in SEA to the power transmission, reflection coefficients in PI' A boundary conditions. The developed hybrid method shows very promising results with regard to the applications for the various damping loss factors in wide frequency ranges. And also this paper presents the applied results of Power Flow Finite Element Method (PFFEM) by forming the new joint element matrix with CLF to analyze the various plate structures in shape. The analytical results of automobile, complex plate structures show good agreement with those of PFFEM using the PFA coefficients.

• 한국해양공학회지
• /
• 제14권2호
• /
• pp.1-6
• /
• 2000

Wave energy absorption by a flap equipped with a harbor in a water of finite depth is studied. The wave potential is calculated by a hybrid integral equation consisting of Green integral equations associated with Rankine and Kelvin Green functions. The absorbed wave energy is calculated by both the near-field and far-field methods. The present methods can be used for the design of a flap-harbor wave energy absorber since the numerical results by the two methods are in good agreement.

• 대한전자공학회논문지TC
• /
• 제37권5호
• /
• pp.17-24
• /
• 2000

자체 설계 및 제작된 개방단말 동축선 프로브를 이용하여 마른 모래의 복소 유전율을 측정하였다. 프로브의 간단한 교정 방안으로 순수한 물에 대해 측정된 반사계수와 수치계산한 반사계수간의 위상차를 모래에 대해 측정된 반사계수의 위상에 뺐다. 그 다음 마른 모래에 대해 측정된 반사계수를 개선된 가상의 동축선 모델에 대입하여 복소 유전율을 환산하였다. 동일한 마른 모래에 대해 측정된 정확한 측정자료와 비교함으로써 본 측정방법의 정확성을 입증하였다.

• 한국음향학회지
• /
• 제34권5호
• /
• pp.335-342
• /
• 2015

포노닉 크리스탈이란 기저물질 내에 주기적으로 배열된 산란체로 구성된 복합물질로서 포노닉 크리스탈에 입사된 음파가 특정 주파수 대역에서 차단되는 현상인 밴드 갭이라는 중요한 특성을 갖는다. 본 연구에서는 수중에서 산란체로서 1 mm의 직경을 갖는 원기둥 형태의 스테인리스 스틸 막대가 1.5 mm의 격자상수를 가지며 정방형으로 배열된 2차원 포노닉 크리스탈의 음향 밴드 구조를 이론 및 실험적으로 고찰하였다. 2차원 포노닉 크리스탈의 밴드 구조를 예측하기 위해 유한요소법을 이용하여 첫째 브릴루앙 영역의 ${\Gamma}X$ 방향에 대해 주파수와 파동벡터에 대한 분산관계를 계산하였다. 초음파가 입사되는 방향과 수직한 스테인리스 스틸 막대 층의 개수를 1, 3, 5, 7, 9개로 변화시켜가며 투과계수 및 반사계수를 측정하였다. 계산된 분산관계로부터 2 MHz 이하의 주파수 대역에서 5개의 밴드 갭이 존재하는 것으로 예측되었으며, 첫째 밴드 갭은 0.5 MHz를 중심으로 나타났다. 투과계수 및 반사계수로부터 실험적으로 확인된 밴드 갭은 분산관계로부터 예측된 밴드 갭과 잘 일치하는 것으로 나타났다.

• 산업기술연구
• /
• 제30권A호
• /
• pp.69-73
• /
• 2010

In this paper, we designed the RF-DC converter used in wireless power transmission system and studied how to design the RF-DC converter of high conversion efficiency. The RF-DC converter operate at 2.45GHz and the diode is connected with series. The RF-DC converter uses shorted stub for DC loop and matching. We can divide the RF-DC converter circuit into four blocks. The reflection coefficients between the blocks were optimized for the maximum conversion efficiency at 0 dBm input power and $1300{\Omega}$ load impedance. The final design of the RF-DC converter has a 52 percent conversion efficiency.

• Journal of Mechanical Science and Technology
• /
• 제20권2호
• /
• pp.185-190
• /
• 2006

An ultrasonic self-calibrating technique for the characterization of a ceramic which was fabricated by change pressing time during the HIP process has been applied by using the ratio of the reflection and transmission coefficients of normal incidence longitudinal waves. The ratio is self-compensated, in that it is independent of the characteristics for transmission and reception of ultrasound by the transducer and the condition of the couplant. The insensitive direction in parameter space is defined as the direction in which the variation of the ratio to changes of two parameters vanishes. For inverse problem the distribution of minima in an error surface is investigated.

• Computers and Concrete
• /
• 제33권5호
• /
• pp.621-630
• /
• 2024

This study presents novel electromagnetic wave-based methods for evaluating the integrity of cement-based structures using time domain reflectometry (TDR). Two cement-based plates with embedded rebars are prepared under sound and defective conditions. TDR tests are carried out using transmission lines with various numbers of artificial joints, and electromagnetic waves are measured to assess the integrity of the plates. The experimental results show that the travel time of electromagnetic waves is consistently longer in sound plates than in defective ones, and an increase in the reflection coefficients is observed in the defect zone of the defective plates. Electromagnetic wave velocities are higher in the defective plates, especially when connectors are present in the transmission line. A novel approach based on the area of the reflection coefficient provides larger areas in the defective plates, and the attenuation effect of the electromagnetic waves induces a difference in the areas of the reflection coefficient between the two defect conditions. An alternative method using the centroid of the defect zone slightly overestimates the location of the defect zone. The length of the defect zone is estimated using the defect ratio and wave velocities of cement, air, and plate. The length of the defect zone can also be calculated using the travel times within the plate, total measured length of the plate, and wave velocities in the cement and air. Therefore, the electromagnetic wave-based methods proposed in this study may be useful for estimating the location and length of defect zones by considering attenuation effects.

• 한국전자파학회논문지
• /
• 제29권10호
• /
• pp.799-804
• /
• 2018

본 논문에서는 일반 측정환경에서 자유공간 물질상수 측정법을 사용한 판형 유전체의 유전율 측정 방법을 제안한다. 측정에는 회로망분석기와 동일한 두 개의 혼 안테나가 S-parameter 측정을 위해 사용되었으며, 측정 결과로부터 판형 유전체의 투과 및 반사계수를 계산하였다. 정밀한 측정을 할 수 없는 환경에서 신뢰할 수 있는 유전율을 얻기 위하여 상대적으로 측정 환경에 의한 측정불확도가 작은 투과계수의 크기만을 유전율 추정에 이용하였으며, 최종적으로 다양한 주파수에서 측정된 결과를 비교하여 유전율을 특정하였다.