• 한국해양공학회지
• /
• 제22권4호
• /
• pp.27-33
• /
• 2008

One of the central problems in astudy of the coastal surface wave environment is predicting the transformation of waves as they propagate toward the shore. The transformation is mainly due to the existence of obstacles, such as breakwaters and vertical cylinders. In general, the types of wave transformation can be classified as follows: wave diffraction, reflection, transmission, scattering, radiation, et al. This research dealtwith wave transmission and dissipation problems for two dimensional irregular waves and vertical circular cylinders. Using the unsteady mild slope equation, a numerical model was developed to calculate the reflection and transmission of regular waves from a multiple-row circular breakwater and vertical cylinders. In addition, hydraulic model experiments were conducted with different values for the properties between tire piles and the opening ratio (distances) between the rows of the breakwater. It was found that the transmission coefficients decreased with a decrease in the opening ratio and an increase in the rows of vertical cylinders. A comparison between the results of hydraulic and numerical experiments showed reasonable agreement.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.819-827
• /
• 2019

Bragg reflection of water waves by three kinds of surface-piercing fixed structures with rectangular, cosinoidal and triangular shapes is studied. Boundary element method is used to analyze the wave scattering by these structures based on the linear wave theory. Results of reflection and transmission coefficients are validated by comparing with those available in literature. These structures with proper configurations are proved to be effective in attenuating waves by using Bragg reflection, and the triangular structures are found to be the best choices among the structures with same width and same area. Systematic calculations are then carried out for the triangular structures by varying the number, the draft, the width, the gap and the combination of width and gap of the structures to analyze their influences on the characteristics of Bragg reflection. The results are of reference values for design of the structures to attenuate waves based on the Bragg reflection.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.287-295
• /
• 2012

Hydrodynamic performance of a movable submerged breakwater was analyzed using energy dissipation model. Based on two-dimensional boundary element method the equation of motion including a viscous dissipation term proportional to velocity squared was solved by Newton-Raphson method. Energy dissipation coefficients as well as reflection and transmission coefficients of a submerged flat plate were calculated with various plate lengths and thickness. Both real and imaginary components of body displacement and forces were used to solve the motion of breakwater accurately. The effect of the magnitude of dissipation coefficient on the body displacement was evaluated. The results from the potential theory with no dissipation term were found to be an overestimate in resonance frequency.

• 한국전자파학회논문지
• /
• 제25권1호
• /
• pp.108-113
• /
• 2014

본 논문에서는 Q-band용 도파관의 내부 돌기가 전송 특성에 미치는 영향을 검토하였다. 도파관 내부의 그린함수를 고유 모드 함수 전개법으로 구하고, 돌기가 내장된 도파관의 내부 임피던스로부터 반사계수 표현식을 도출하였으며, 도파관 내의 내부 돌기가 반사계수에 미치는 영향을 검토하였다. 이론 해석의 타당성을 검증하기 위해 반사계수를 측정하고 이론치와 비교하였다.

• 한국해안·해양공학회논문집
• /
• 제26권6호
• /
• pp.343-351
• /
• 2014

유공벽에 의한 파의 반사율과 투과율은 주로 유공벽의 공극률과 벽두께 그리고 입사파의 주기 및 비선형성에 의해 결정된다. 이중에서 벽두께는 유공벽의 수두손실계수와 관성저항길이에 영향을 미치므로 매우 중요하다. 그러나 기존의 연구에서는 예연 오리피스의 수두손실계수를 사용함으로써 수두손실계수에 미치는 벽두께 효과를 무시 또는 부정확하게 고려하였거나, 벽두께가 수두손실계수에 미치는 영향은 고려하였더라도 관성저항 길이를 무시함으로써 벽두께가 유공벽의 반사율과 투과율에 미치는 영향이 적절히 고려되지 못 하였다. 따라서 본 연구에서는 다양한 두께의 유공벽을 제작하여 파의 반사율 및 투과율 측정 수리실험을 수행하였으며, 그 결과를 기존의 해석해에 의한 값과 비교하였다. 비교결과 기존의 해석해 들이 벽두께의 효과를 적절히 반영하지 못하고 있음을 확인하였으며, 벽두께 효과를 정도 높게 고려할 수 있는 새로운 수두손실계수 산정식이 필요함을 확인하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.396-402
• /
• 2006

An efficient spline boundary element scheme is newly developed for water wave scattering of an incident wave train on a submerged breakwater. Validation of the present scheme is accomplished through the numerical experiments for various cases, by comparing the numerical results with theories vailable in the literature. Very accurate reflection and transmission coefficients for thin horizontal breakwater are obtained. It is observed that the reflection coefficient for the rectangular breakwater is significantly affected by the thickness. Horizontal and vertical forces on the breakwater for various thicknesses were also investigated.

• 한국군사과학기술학회지
• /
• 제6권2호
• /
• pp.73-82
• /
• 2003

For measurements and analysis of dielectric characteristics of planar slabs of microwave absorbing materials, I have applied a free-space method in the frequency range of 8~14 GHz. The measurement system for free-space method consists of transmit and receive antennas, mode transitions, precision coaxal cables, the network analyzer, and a computer Special Spot-focused horn lens antenna was used to eliminate diffraction effects. Diffraction effects at the edges of the sample are minimized by satisfying the condition for minimum transverse dimension of the plate and the beamwidth of the antennas at the focus. The time-domain gating feature of the network analyzer and the thru, reflect, and line(TRL) calibration technique were used to eliminate the effects of undesirable multiple reflections. The complex coefficients of reflection and transmission, $S_{11}$ and $S_{21}$, of planar samples were measured for standard materials such as Teflon, Rexolite$\textregistered$ 2200. The results were compared with existing measurement method. And I applied a free-space method for measurement to measure dielectric constants of some electromagnetic absorbing materials. Dielectric properties for the same samples were also measured with a 7mm coxial transmission line method for purposes of comparison with the free-space method.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.159-162
• /
• 2007

The numerical efforts are presented for investigation of irregular waves passing a slit cassion and a warock block breakwater. In the numerical model, the Reynolds equations are solved by a finite difference method and $k-\varepsilon$ model is employed for the turbulence analysis. To track the free surface displacement, the volume of fluid method(VOF) is employed. Numerical predictions of reflection and transmission coefficients are compared with those of the warock block breakwater with the slit caisson. Energy dissipation and seawater exchange rates of the slit caisson are better than those of the warock block breakwater.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.253-256
• /
• 1996

Stiffened panels are very frequently used for body structures of automobiles, air-crafts, submarines, etc., to suppress the vibration level. Swaging technique is the modification of the configuration of panel itself, and this is prefered to rib-like stiffeners because it does not change the total weight of structure. In this paper, the transmissibility of vibratory power through swage is investigated, where the swage is modeled as an incomplete circular ring, utilizing the well-known transfer matrix method. The power transmission and reflection coefficients of swaged panel are estimated and compared with experimental results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.711-714
• /
• 2002

This paper presents a method to determine the propagation properties in the junctions between straight and bent waveguides using cylindrical functions of complex order. The proposed method was succeeded by developing the method of numerical calculation of cylindrical functions of complex order. As a result, we numerically calculate the reflection and transmission coefficients in the junctions in various situations, and we compare these results with the results by the perturbation method.