• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.43-51
• /
• 2001

When percentages of the component of raw lacquer were changed by adding each components that is urushiol, polysaccharide and glycoprotein, the physical properties of refined lacquer were changed and the period of refining also were changed. When polysaccharide component extracted from raw lacquer was added in raw lacquer, the period of refining was shortened about 1/3 times and this refined lacquer film was dried faster than the refined lacquer which was not added any other components. When urushiol extracted from raw lacquer was added in raw lacquer, the transparency of dried film was improved. A case of Guizhoushang was improved of the tensile strength of dried film. When both urushiol and polysaccharide were added in raw lacquer, the drying time of refined lacquer was shortened and the tensile strength of them also was improved.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.31-42
• /
• 2001

In this study, we obtained fundamental data about Korean raw lacquer's physical and chemical properties to produce high quality lacquer. The tested raw lacquers were obtained from Won-ju in Korea, Shanxishang, Guizhoushang, Anhuishang in China. The drying time of refining lacquers, tensile strengths of dried films and uniformity of films are measured. The refined lacquers were prepared by experimentally scaled refining equipment. Films of lacquer were applied on glasses by film applicator. This films were tested by universal strength test machine. The films were pictured by scanning electron microscopy and confocal microscopy to define the uniformity of them. The refining method were not different among three different kind of raw lacquers which were different their collecting time and places. But the viscosity of them were quite different. When black refined lacquer is made with iron powder, the adding time of iron powder is critical to control the viscosity of it. The refining times, viscosity and tensile strength of refined lacquers were not depended the method of refining condition but the place of collecting of raw lacquer.

• Journal of Korean Society of Rural Planning
• /
• v.6 no.2 s.12
• /
• pp.20-33
• /
• 2000

The lacquer is one of the most important resources for endogenous development and cultural reproduction in Wonju. However traditional and social network, which had been formed by lacquer farmers, group of lacquer-pickers, refineries, and lacquer-ware craftsmen, is being collapsed. It is due to the recent imports of raw lacquer from China and refined lacquer from Japan. Public sectors including Wonju city have continuously improved the potential of lacquer production by planting lacquers. However, the potential of lacquer production isn't under enough condition to realize its value. In this study, it is suggested that the efforts of public sectors to raise lacquer industry, focused on the improvements of lacquer production potential until now, should be concentrated on realization of the production potential by reconstructing social productive system which is composed of diverse groups involved in lacquer ware production.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.81-90
• /
• 2003

In this study, we investigated the weathering properties of Korean Rhus lacquers containing tung oil and their potential use as exterior coatings. The finished lacquers were prepared with a raw Korean Rhus lacquer or refined Korean Rhus lacquer content of 10, 20, 30 and 40 wt.% (corresponding to ratios of 10/90, 20/80, 30/70 and 40/60 by weight of Korean Rhus lacquer/tung oil, respectively). The curing temperature of the prepared lacquer increased with increasing the content of the raw Korean Rhus lacquer. This increased curing temperature is related to higher proportion of hydroxyl groups in the prepared lacquer, due to the content of the raw Korean Rhus lacquer. In accelerated weathering testing, the changes in the gloss and contact angle of the prepared lacquers showed a similar trend to that of traditional exterior oil stain. In addition, the prepared lacquers containing tung oil showed greater discoloration than traditional exterior oil stain. However, the discoloration of the prepared lacquer with a raw Korean Rhus lacquer content of 40 wt.%, and that of the prepared lacquer with refined Korean Rhus lacquer contents of 30 wt.% and 40 wt.%, showed a similar trend to that of traditional exterior oil stain. Consequentially, these prepared lacquers showed a potential for being used as exterior coatings.

• Conservation Science in Museum
• /
• v.13
• /
• pp.33-36
• /
• 2012

Analysis of Flat board-shaped Lacquer ware excavated from Daho-ri was conducted. The result of species identification is identifed as Pinus spp. As a result of microscopic observation, lacquer fragment is consist of 5 layers and its thickness is about 100 ㎛. Infrared spectroscopy of the lacquer ware revealed that they had a very similar absorption band as refined lacquer, confirming that they were painted with lacquer. Result of Analysis for Circular metal ornament is alloy smelted by tin and lead. It is called Pewter. While The species of wooden objects investigated until now is broad-leaved tree; the species of flat board-shaped lacquer ware is conifer.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.24-33
• /
• 1987

This study was executed to investigate scanning electron microscopic characteristics of Korean Rhus lacquer coats. With the unrefined coat, distilled water, sodium hydroxide, acetic acid, ethyl alcohol, cold-check test, and accelerated weathering were performed after refining treatment. These treated lacquer coats were discussed through observation by scanning electron microscope and the obtained results were summarized as follows: 1. Compared with unrefined coat, the refined coat of Korean Rhus lacquer showed more even surface with regular distribution of dispression. 2. Korean Rhus lacquer coat heated at $120^{\circ}C$ for 3 hours revealed no observable difference irrespective of refining and unrefining. 3. Korean Rhus lacquer coat treated by distilled water, sodium hydroxide, acetic acid. ethyl alcohol, cold-check test. and ultraviolet radiation showed significant characteristics compared with untreated coat. Especially. large deformation and checkings were observed by cold-check test and ultraviolet radiation respectively. 4. The Korean Rhus lacquer coat radiated by ultraviolet ray showed 0.11 duller and 1.41 brighter than non-radiated coat through color difference calculator.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.453-469
• /
• 2019

The celadon jar with inscription of 'the Fourth Sunhwa Year' is an important chronology that shows the conditions of production of the early celadon due to the inscription on the bottom including its purpose, application, and the producer. This celadon jar has been restored several times in the past. However, concerns over the structural stability, such as the separation and level differences in the joined cracks, have risen because of the aging of the repair materials, which were subjected to various environmental changes over a long time. By examining the conditions of preservation, the major damage was identified as the '入' shaped crack on the front, the 'V' shaped restored part and the crack on its left side, and the 'J' shaped crack on the back side. In the past, the cracks were found to be joined using a refined lacquer containing camphor, drying oil, rosin, etc. mixed with soil powder. The joint line was repainted with the refined lacquer and covered with gold powder. The missing parts were restored with gypsum and colored with acrylic color. After that, the repair materials were aged and emergency treatment was performed at the National Museum of Korea in 1981. At that time, Cemedine C or Cemedine C mixed with microballoons was used for reinforcing the cracks. Conservation treatment focused on removing the past repair materials and reinforcing the physically fragile parts by joining and restoring them based on the examination of the preservation condition. in addition, the area around the restored part was colored for future exhibition.

• Journal of Conservation Science
• /
• v.33 no.5
• /
• pp.355-362
• /
• 2017

The Nongso tomb of Sunchang was built in a relatively deep place; hence there was little damage from grave robbers. The tomb was completely filled with a large amount of charcoal, and therefore the wooden coffin was excavated in relatively good condition. On the basis of the structure of the tombs, excavated artifacts, and radiocarbon dating results, the tomb is estimated to be from between the late Goryeo and the early Joseon period. The wooden coffin excavated is double-layered structures consisting of an outer coffin and an inner coffin. The outside of the wooden coffin is thickly lacquered and decorated with yellow letters and white motifs. An analysis of the pigments' components revealed that the major component of the letters was gold (Au) and the major component of the motifs was silver (Ag). The coffin lacquer had three layers: a pigment layer, a yellowish-brown layer, and a black layer. The wooden bases of the coffins were painted with a black substance, such as soot, as mineral elements were not detected in the black layer. The yellowish-brown layer is presumed to be refined lacquer. From the analysis of the structure of the layers and pigments, we can estimate the method was adopted for making lacquer for wooden coffin. It is assumed that the method used gold leaf and gold powder. The form of the pigment and the internal structure are likely to be gold leaf, but the shape of the surface letters appears to have been formed using gold powder. This study will serve as important information for understanding lacquer making techniques at the time of the tombs' construction by confirming the making method through reproduction experiments using gold leaf and gold powder.

• Conservation Science in Museum
• /
• v.10
• /
• pp.43-61
• /
• 2009

The Buyeo National Museum was requested conservation treatment for wooden objects excavated from three Baekje archeological sites: Neungsan-ri, Ssangbuk-ri, and Gungnamji Pond. Prior to conservation treatment, analysis was conducted to identify the species used. The results of the analysis revealed wood from diverse species of trees including Hard pine, Cryptomeria japonica D. Don, Zelkova serrata Makino, Quercus spp., Platycarya strobilaceae S. et Z., Castanea spp., Torreya nucifera S. et Z., Taxus cuspidata S. et Z., and Salix spp. A high percentage of the objects were made of Cryptomeria japonica D. Don., a species native to Japan, which indicates that exchange with Japan was active at that time. Among the wooden objects, we analyzed lacquer fragments from six pieces of lacquerware, and the characteristics of the lacquer fragments were peculiar to specific artifacts. Most of the fragments were thicker than 100 ㎛. Pure lacquer and mixed black pigment were used. Infrared spectroscopy of the lacquered wooden fragments revealed that they had a very similar absorption band as refined lacquer, confirming that they were painted with lacquer. For their conservation, we immersed the objects in a high molecular weight aqueous solution of PEG#3,350 (10% → 50%) to strengthen them before vacuum freeze-drying.