• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.3
• /
• pp.1-16
• /
• 2022

Areas developed through land reclamation projects have huge economic advantages in terms of supplying lands that can be used for farmlands, urban areas and etc., however have relatively small areas of grasslands and densely located buildings compared to inland cities. Hence, an urban heat island is occurring in these areas due to this characteristic, and in particular, the urban heat island in Cheongna International City is getting serious. In this study, the urban heat island in Cheongna International City was evaluated and analyzed by classified into the three periods after the reclamation project: farmland(2001-2008), development(2009-2013) and artificial grassland(2014-2020). The land cover map and Landsat time-series imagery were utilized for measuring the differences of the land surface temperatures between the urbanized areas and the grassland/forest areas in Cheongna International City. The statistical results showed that the differences in the land surface temperature between these areas were calculated to be at most 0℃ during the period of farmland, at most 3.60℃ during the period of development, and at most 2.51℃ during the period of grassland. This study proved that the urban heat island phenomenon increased when the urbanized areas increased, and the urban heat island phenomenon decreased when the artificial grassland areas increased in Cheongna International City where the reclamation project was carried out. The statistical results derived through this research can be used as the reference data for identifying the urban heat island problem in urban planning and establishing the reduction plan.

• Journal of Internet Computing and Services
• /
• v.24 no.1
• /
• pp.61-69
• /
• 2023

Recently, as the fishery resources are depleted, expectations for productivity improvement by 'rearing fishery' in land farms are greatly rising. In the case of land farms, unlike ocean environments, it is easy to control and manage environmental and breeding factors, and has the advantage of being able to adjust production according to the production plan. On the other hand, unlike in the natural environment, there is a disadvantage in that operation costs may significantly increase due to the artificial management for fish growth. Therefore, profit maximization can be pursued by efficiently operating the farm in accordance with the planned target shipment. In order to operate such an efficient farm and nurture fish, an accurate growth prediction model according to the target fish species is absolutely required. Most of the growth prediction models are mainly numerical results based on statistical analysis using farm data. In this paper, we present a growth prediction model from a stochastic point of view to overcome the difficulties in securing data and the difficulty in providing quantitative expected values for inaccuracies that existing growth prediction models from a statistical point of view may have. For a stochastic approach, modeling is performed by introducing a Gaussian process regression method based on water temperature, which is the most important factor in positive growth. From the corresponding results, it is expected that it will be able to provide reference values for more efficient farm operation by simultaneously providing the average value of the predicted growth value at a specific point in time and the confidence interval for that value.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.93-101
• /
• 2008

The application of solid phase microextraction (SPME) is generally conducted by directly immersing the fiber into the liquid sample or by exposing the fiber in the head space (HS). The extraction temperature, the time of incubation, and application of stirring are often designated to be the most important parameters for achieving the best extraction efficiencies of HS-SPME analysis. In this study, relative importance of these three analytical parameters involved in the HS-SPME method is evaluated using a polydimethylsiloxane/carboxen (PDMS/CAR) fiber. To optimize its operation conditions the competing relationships between different parameters were investigated by comparing the extraction efficiency based on the combination of three parameters and two contracting conditions: (1) heating the sample at 30 vs. 50 C, (2) exposing samples at two durations of 10 vs. 30 min, and (3) application of stirring vs. no stirring. According to our analysis among 8 combination types of HS-SPME method, an extraction condition termed as S50-30 condition ((1) 1200 rpm stirring, (2) $50^{\circ}C$ exposure temp, and (3) 30 min exposure duration) showed maximum recovery rate of 45.5~68.5% relative to an arbitrary reference of direct GC injection. According to this study, the employment of stirring is the most crucial factor to improve extraction efficiency in the application of HS-SPME.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.4
• /
• pp.235-246
• /
• 2011

Sea level fluctuations during the Holocene reconstructed by the results of age dating, microfossils researches and sedimentary facies from coastal alluvial plains contain the valuable informations on climatic changes. The sea level during 'maximum phase of transgression' during 6,000~5,000 yr BP was slightly higher than the present by approximately 0.8~1.0 m and the summer temperature conditions seemed to be higher than those of the present by 2~3℃ in the Central Europe when the period of 'Climatic Optimum' might be dominant. The sea level in Korean Peninsula was assumed by 0.8~1.0 m higher at that time compared to the present and climate seemed to be warmer. At 2,000~1,800 yr BP in Korean Peninsula, the sea level reached the higher stand than the present by approximately 1.1~1.3 m and the climatic conditions might be warm similar to the period of 'Climatic Optimum'. Although the temperature in the Central Europe during the period of 'Subboreal' was about 2~3℃ cooler, it is supposed that the sea level in Korean Peninsula was relatively higher than the present. The sea level at 2,300 yr BP might be similar to that of the present, which was the lowest level since the mid-Holocene. From the fact, climatic environment during the cold period might not be reflected exactly in the sea level.

• Smart Structures and Systems
• /
• v.30 no.5
• /
• pp.521-535
• /
• 2022

Efficient management of deteriorating civil infrastructure is one of the most important research topics in many developed countries. In particular, the remote displacement measurement of bridges using linear variable differential transformers, global positioning systems, laser Doppler vibrometers, and computer vision technologies has been attempted extensively. This paper proposes a remote displacement measurement system using closed-circuit televisions (CCTVs) and a computer-vision-based method for in-situ bridge bearings having relatively large displacement due to temperature change in long term. The hardware of the system is composed of a reference target for displacement measurement, a CCTV to capture target images, a gateway to transmit images via a mobile network, and a central server to store and process transmitted images. The usage of CCTV capable of night vision capture and wireless data communication enable long-term 24-hour monitoring on wide range of bridge area. The computer vision algorithm to estimate displacement from the images involves image preprocessing for enhancing the circular features of the target, circular Hough transformation for detecting circles on the target in the whole field-of-view (FOV), and homography transformation for converting the movement of the target in the images into an actual expansion displacement. The simple target design and robust circle detection algorithm help to measure displacement using target images where the targets are far apart from each other. The proposed system is installed at the Tancheon Overpass located in Seoul, and field experiments are performed to evaluate the accuracy of circle detection and displacement measurements. The circle detection accuracy is evaluated using 28,542 images captured from 71 CCTVs installed at the testbed, and only 48 images (0.168%) fail to detect the circles on the target because of subpar imaging conditions. The accuracy of displacement measurement is evaluated using images captured for 17 days from three CCTVs; the average and root-mean-square errors are 0.10 and 0.131 mm, respectively, compared with a similar displacement measurement. The long-term operation of the system, as evaluated using 8-month data, shows high accuracy and stability of the proposed system.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.2
• /
• pp.147-155
• /
• 2008

A series of experiments were conducted to find standard test organisms and to develop test protocols for sediment toxicity tests using indigenous amphipods inhabited in Korean coastal environments. The indigenous amphipods Mandibulophoxus mai and Monocorophium acherusicum were well associated with various sediment substrates from sand to mud. The tolerance limits to various physico-chemical factors affecting bioassay results such as temperature, salinity and total ammonium as well as the sensitivities to contaminants in water and sediments were investigated using M. mai and M. acherusicum in the present study. These amphipods were tolerable to the adequate ranges of salinity ($10{\sim}30\;psu$), temperature ($10{\sim}25^{\circ}C$) and ammonia (<50 ppm). They have relevant sensitivities to the reference toxicants, dissolved cadmium as well as other metals and organic pollutants, when compared to the standard test species used in other countries. Field-sediment toxicity tests revealed that M. mai would be more sensitive to sediment-associated pollutants than M. acherusicum, while the sensitivity of M. acherusicum was comparable to those of other sediment test species in other countries. Overall results of this first attempt to develop an amphipod sediment toxicity test protocol in Korea indicated that M. mai and M. acherusicum should be applicable in the toxicity assessment of contaminated sediments, following the further evaluation encompassing various ecological and toxicological evaluation and the standardization of test method.

• Monthly Notices of the Royal Astronomical Society
• /
• v.489 no.3
• /
• pp.4389-4417
• /
• 2019

We study the dust properties of 192 nearby galaxies from the JINGLE survey using photometric data in the 22-850 ㎛ range. We derive the total dust mass, temperature T, and emissivity index β of the galaxies through the fitting of their spectral energy distribution (SED) using a single modified blackbody model (SMBB). We apply a hierarchical Bayesian approach that reduces the known degeneracy between T and β. Applying the hierarchical approach, the strength of the T-β anticorrelation is reduced from a Pearson correlation coefficient R = -0.79 to R = -0.52. For the JINGLE galaxies we measure dust temperatures in the range 17-30 K and dust emissivity indices β in the range 0.6-2.2. We compare the SMBB model with the broken emissivity law modified blackbody (BMBB) and the two modified blackbody (TMBB) models. The results derived with the SMBB and TMBB are in good agreement, thus applying the SMBB, which comes with fewer free parameters, does not penalize the measurement of the cold dust properties in the JINGLE sample. We investigate the relation between T and β and other global galaxy properties in the JINGLE and Herschel Reference Survey (HRS) sample. We find that β correlates with the stellar mass surface density (R = 0.62) and anticorrelates with the H i mass fraction (M_{H i}/M_*, R = -0.65), whereas the dust temperature correlates strongly with the star formation rate normalized by the dust mass (R = 0.73). These relations can be used to estimate T and β in galaxies with insufficient photometric data available to measure them directly through SED fitting.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.238-249
• /
• 2019

The evapotranspiration is estimated based on weather factors such as temperature, wind speed and humidity, and the Hargreaves equation is a simple equation for calculating evapotranspiration using temperature data. However, the Hargreaves equation tends to be underestimated in areas with wind speeds above 3 m s^-1 and overestimated in areas with high relative humidity. The study was conducted to determine Hargreaves equation coefficient in 82 regions in Korea by comparing evapotranspiration determined by modified Hargreaves equation and the Penman-Monteith equation for the time period of 2008~2018. The modified Hargreaves coefficients for 50 inland areas were estimated to be 0.00173~0.00232(average 0.00196), which is similar to or lower than the default value 0.0023. On the other hand, there are 32 coastal areas, and the modified coefficients ranged from 0.00185 to 0.00303(average 0.00234). The east coastal area was estimated to be similar to or higher than the default value, while the west and south coastal areas showed large deviations by area. As results of estimating the evapotranspiration by the modified Hargreaves coefficient, root mean square error(RMSE) is reduced from 0.634~1.394(average 0.857) to 0.466~1.328(average 0.701), and Nash-Sutcliffe Coefficient(NSC) increased from -0.159~0.837(average 0.647) to -0.053~0.910(average 0.755) compared with original Hargreaves equation. Therefore, we confirmed that the Hargreaves equation can be overestimated or underestimated compared to the Penman-Monteith equation, and expected that it will be able to calculate the high accuracy evapotranspiration using the modified Hargreaves equation. This study will contribute to water resources planning, irrigation schedule, and environmental management.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1038-1047
• /
• 2018

This study confirmed possibility of cosmetic material for Espresso coffee grounds extracted at high temperature, high pressure, short time and Dutch coffee grounds extracted at low temperature, atmospheric pressure, long time. For this purpose, we evaluated the biological activities of antioxidant, anti-wrinkles and antimicrobial effects using ethanol extracts of Esproso and Dutch coffee grounds. The results of total polyphenolic compound contents was $90.39{\pm}0.04mg/g$ for Dutch coffee grounds extract, which was higher than $64.96{\pm}0.38mg/g$ for Espresso coffee grounds extract, based on $113.63{\pm}0.22mg/g$ for coffee beans extract as the reference one. DPPH radical scavenging activity and SOD-like activity of Dutch coffee grounds extract were found to be better than those of Espresso coffee grounds extracts, referenced on coffee bean extract. As a result of inhibition effect of Elastase activity, Dutch coffee grounds extract showed higher inhibition effect than Espresso coffee grounds extract, based on coffee bean extract. In addition, Dutch coffee grounds extract showed good anti-microbial effects at Escherichia coli, Bacillus, Propionibacterium acnes and there was little difference in the clear zone size between Dutch coffee grounds extract and coffee bean extract as a reference one. From the results of the experiments, it was confirmed that Dutch coffee grounds extract had excellent antioxidant, anti-wrinkle and antimicrobial effects and could be used as safe natural cosmetic material in the future.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.117-131
• /
• 2006

A coupled T-H-M(Thermo-Hydro-Mechanical) analysis was carried out for KENTEX (KAERI Engineering-scale T-H-M Experiment for Engineered Barrier System), which is a facility for validating the coupled T-H-M behavior in the engineered barrier system of the Korean reference HLW(high-level waste) disposal system. The changes of temperature, water saturation, and stress were estimated based on the coupled T-H-M analysis, and the influence of the types of mechanical constitutive material laws was investigated by using elastic model, poroelastic model, and poroelastic-plastic model. The analysis was done using ABAQUS, which is a commercial finite element code for general purposes. From the analysis, it was observed that the temperature in the bentonite increased sharply for a couple of days after heating the heater and then slowly increased to a constant value. The temperatures at all locations were nearly at a steady state after about 37.5 days. In the steady state, the temperature was maintained at $90^{\circ}C$ at the interface between the heater and the bentonite and at about $70^{\circ}C$ at the interface between the bentonite and the confining cylinder. The variation of the water saturation with time in bentonite was almost same independent of the material laws used in the coupled T-H-M processes. By comparing the saturation change of T-H-M and that of H-M(Hydro-Mechanical) processes using elastic and poroelastic material mod31 respectively, it was found that the degree of saturation near the heater from T-H-M calculation was higher than that from the coupled H-M calculation mainly because of the thermal flux, which seemed to speed up the saturation. The stresses in three cases with different material laws were increased with time. By comparing the stress change in H-M calculation using poroelasetic and poroelasetic-plastic model, it was possible to conclude that the influence of saturation on the stress change is higher than the influence of temperature. It is, therefore, recommended to use a material law, which can model the elastic-plastic behavior of buffer, since the coupled T-H-M processes in buffer is affected by the variation of void ratio, thermal expansion, as well as swelling pressure.