• Journal of Biomedical Engineering Research
• /
• v.3 no.1
• /
• pp.55-58
• /
• 1982

In this paper, a method for camera position estimation in gaster using elechoendoscopic image sequence is proposed. In order to obtain proper image sequences, the gaster in divided into three sections. It is presented that camera position modeling for 3D information extraction and image distortion due to the endoscopic lenses is corrected.The feature points are represented with respect to the reference coordinate system belpw 10 percents error rate. The faster distortion correction algorithm is proposed in this paper. This algorithm uses error table which is faster than coordinate transform method using n-th order polynomials.

• Bulletin of the Korean Mathematical Society
• /
• v.47 no.2
• /
• pp.275-286
• /
• 2010

The algebraic structure of the natural integral cohomology operations is explored by means of examples. We decompose the generators of the groups $H^m(\mathbb{Z},\;n)$ with $2\;{\leq}\;n\;{\leq}\;7$ and $2\;{\leq}\;m\;{\leq}\;13$ into the operations of cup products, cross-cap products and compositions. Examination of these decompositions and comparison with other possible generators demonstrates the existence of relations between integral operations that have withheld formulation. The calculated groups and generators are collected in a table for practical reference.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.3
• /
• pp.213-220
• /
• 2001

This paper presents the interrelationship between software quality character and engineering attributes. The software quality characteristics and subcharacteristics are excerpted from IS0/IEC 9126 standards, and the engineering attributes are from Deutsch and Willis〔4〕. Based on the previous studies a subjective judgement, trisected interrelationship(strong, medium, weak) bet these two groups are derived. The results are summarized in a table, and can be used as a quick reference guide to the software quality engineering application such as quality evaluations for software products, selection of key engineering attributes for high-quality software production, and so forth.

• Korean Journal of Community Nutrition
• /
• v.23 no.5
• /
• pp.411-423
• /
• 2018

Objectives: The purpose of this study was to develop new meal planning tools for a nutritionally balanced diet. Methods: Based on the food exchange list for diabetes, we adjusted the food group classification system to reflect the suggested nutritional factors for chronic disease prevention and health promotion. We developed a nutritionally balanced dietary profile for adults and compared it with the dietary reference intakes for Koreans (KDRIs) and the food pattern recommended by the Korean Diabetes Association. Results: The newly developed menu planning tools are the LOHAS food exchange table and the LOHAS food pattern. Our recommended daily 1,800 kcal dietary composition for adults is as follows: The carbohydrate food group consists of 4 'whole grains', 3 'refined grains', 2 'sugars', 9 'vegetables', 3 'starchy vegetables', 2 'fruits' and 1 'high sugar fruits'. The protein food group includes 3 'plant protein foods', 3 'animal protein foods (low-fat)', and 1 'animal protein foods (high-fat)'. The fat food group consists of 2 'oils and nuts' and 1 'solid fats'. The total number of calories is estimated at 1,840 kcal and the energy ratio is 62% carbohydrate, 18% protein, 20% fat, 6.8% saturated fat and 13.2% sugars. Using the LOHAS food exchange table, it is possible to estimate values of saturated fat, unsaturated fat, dietary fiber, and sugars besides carbohydrate, protein and fat. It is also possible to compose a dietary design considering carbohydrate, sugars, saturated fat and dietary fiber. The LOHAS food pattern provides benefits for the management of both institutional food services and individual meals, as it can help reduce the levels of saturated fat and sugar intake and help develop healthy meals rich in unsaturated fats and dietary fiber. Conclusions: The LOHAS food exchange table and LOHAS food pattern are expected to be practical tools for designing and evaluating nutritionally balanced diets.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.762-767
• /
• 2007

The activity conducted throughout the life cycle of any facility generate an enormous quantity of data that needs to be stored, retrieved, communicated, and used by all parties involved. Advanced in technology have increased the opportunities for gathering, providing access to exchanging, and archiving all of this information for future reference. Considering that classification system of construction material is reviewed international exchange of information by the ISO standard, it is consist of classification form of construction process. As a result, this study analyzed to OmniClass Table-22(Master Format-20(4) for the purpose of gaining a the international standard and electronic information, and compared to OmniClass Table-23 ${\cdot}$ 35 ${\cdot}$ 41(UniClass, EPIC) for the expansion and standardization. Furthermore, it is tried to integrate with UN/SPSC attribute code for the establishing of application and international exchange.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1822-1829
• /
• 2008

Calibration of an MEMS inertial measurement unit is very important process for obtaining precise navigation performance. In this paper, one method is proposed to overcome a limitations on cost and efficiency using a relatively higher grade sensor and a rate table. The same dynamic input is applied to both the reference and the target sensors during and after calibration process, then the results are analyzed. The experimental results show that the proposed method is very effective and useful in practice.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.227-234
• /
• 2000

Soilcrete has been a traditional material for pavement and soft ground improvement techniques. However, since the durability is not excellent and the quality is not consistent, it has not been used for various purposes up to date. However, with the increase of naturally oriented needs for light traffic roads such as pedestrian roads of garden, golf courses and sidewalks, the cases of the high strength soilcrete paving have been increased lately. This study aims at making a reference table of mix design in accordance with the required design specifications fur the high strength soilcrete admixtured with the pozzolanic cement by using a statistical experimental method. The treated soil is the clay which is widely found in Korea. As the results of this study, we could derive an effective reference mix design table for the clay treated with the pozzolanic cement stabilizer in accordance with the compressive strength of $50~150kg/cm^2$ soilcrete.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.55-61
• /
• 2009

In order to observe the impact of a type of vehicles for traffic flows and pavement, vehicle classifications is conducted. Korean Ministry of Land, Transport and Maritime Affairs provides 12-type vehicle classifications on National expressways, National highways, and Provincial roads. Current AVC (Automatic Vehicle Classification) devices decide vehicle types comparing measurements of vehicle lengths, wheelbases, overhangs etc. to a reference table including those of all types of models. This study developed an algorithm for macroscopic vehicle classification which is less sensitive to tuning sensors and updating the reference table. For those characteristics, trend lines in vehicle lengths and wheelbases are employed. To assess the algorithm developed, vehicle lengths and wheelbases were collected from an AVC device. In this experiment, this algorithm showed the accuracy of 88.2 % compared to true values obtained from video replaying. Our efforts in this study are expected to contribute to developing devices for macroscopic vehicle classification.

• Journal of Korean Society of Archives and Records Management
• /
• v.22 no.2
• /
• pp.27-49
• /
• 2022

According to the amendment of the Enforcement Decree of the Public Records Management Act in 2020, an administrative information dataset record management plan will be enacted, and the National Archives of Korea plans to establish an integrated administrative information dataset management system to support it. However, there is no specific service plan that considers the characteristics of the datasets and the Management Reference Table. Therefore, this paper compared and analyzed the current status of dataset services at 14 domestic and foreign public data portals and archives websites, derived implications, and proposed 6 service plans applicable to the integrated administrative information dataset management system. This study's results will lead to utilizing the administrative datasets and the activation of services.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2708-2715
• /
• 2012

This paper proposes a new sensorless speed control scheme of induction motor using Model Reference Adaptive Control and Direct Torque Control System. The Model Reference Adaptive Control System is based on the comparison between the outputs of Reference Model and Adjustable Model. The error between the estimated quantities obtained by the two models is used to drive a suitable adaptation mechanism which generates the estimated rotor speed for the Adjustable Model. And the Direct Torque Control scheme controls torque and flux by restricting the flux and torque errors within respective hysteresis bands, and motor torque and flux are controlled by the stator voltage space vector using optimum inverter switching table. The simulation results of proposed method indicate good speed responses from the low speed range to the high, and also show favorable characteristics of load operation.