• 디지털산업정보학회논문지
• /
• 제9권1호
• /
• pp.9-23
• /
• 2013

In recent days, there are many researches of wireless LAN services as the communication environment of wireless LAN are so improved that a lot of services are available in wireless environments. The frequency of the wireless LAN is a general resource that can be used to everyone without any permission. Many technologies using this ISM (Industry Science Medical) frequency band are developed fast and widely. But, as many devices use the same frequency band at th same time, the service quality is degraded and the speed of the service rate id degraded by the result of the interference. For overcome this problem, we must provide the new technology of the mobile devices and a new cell design scheme for obtaining maximum throughput that considering the wireless environments effectively. In this paper, we explain the main technology at the IEEE 802.11n environments and proposes the optimal cell design and reference model for gaining maximum performance to many mobile devices at the same time by investigating real environment testing results.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1454-1470
• /
• 2014

This paper propose a new power conditioner topology with intelligent power management controller that integrates multiple renewable energy sources such as solar energy, wind energy and fuel cell energy with battery backup to make best use of their operating characteristics and obtain better reliability than that could be obtained by single renewable energy based power supply. The proposed embedded controller is programmed for maintaining a constant voltage at PCC, maximum power point tracking for solar PV panel and WTG and power flow control by regulating the reference currents of the controller on instantaneous basis based on the power delivered by the sources and load demand. Instantaneous variation in reference currents of the controller enhances the controller response as it accommodates the effect of continuously varying solar insolation and wind speed in the power management. The power conditioner uses a battery bank with embedded controller based online SOC estimation and battery charging system to suitably sink or source the input power based on the load demand. The simulation results of the proposed power management system for a standalone solar/WTG/fuel cell fed hybrid power supply with real time solar radiation and wind velocity data collected from solar centre, KEC for a sporadically varying load demand is presented in this paper and the results are encouraging in reliability and stability perspective.

• Journal of Microbiology and Biotechnology
• /
• 제13권1호
• /
• pp.119-124
• /
• 2003

This study was conducted to evaluate the practical usefulness of the sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PACE) fingerprinting of whole cell proteins far the identification of lactic acid bacteria in Kimchi. SDS- PACE of whole cell proteins of the reference strains and lactic acid bacteria isolated from Kimchi yielded differential banding patterns that were highly specific fingerprints, thus making it possible to identify. Identification of the isolates from Kimchi was achieved by comparing the SDS-PAGE fingerprints of isolates to those of reference strains. In addition, the reliability of SDS-PAGE was examined by comparing the results with those of the APL 50 CHL system assay and 16S rRNA gene sequence. SDS-PACE assay showed a different identity to reference strains, while the APL 50 CHL system and 16S rRNA gene sequence could not distinguish a few strains. Therefore, SDS-PAGE of the whole cell proteins is a specific and a reliable method that will be useful for the identification of lactic acid bacteria in Kimchi to the species level, and can be used as an alternative or complementary identification method.

• 한국항행학회논문지
• /
• 제23권5호
• /
• pp.437-443
• /
• 2019

본 논문에서는 LTE 기지국 (BS; base station)과 단말기 (UE; user equipment) 간의 거리를 신호 도달 시간 (TOA; time-of-arrival)을 이용해 계산하는 알고리즘을 소개하였다. 먼저, 수신된 신호를 발신한 기지국을 판별하기 위해 primary synchronization signal (PSS)와 secondary synchronization signal (SSS)를 이용하여 셀 아이디를 취득하였다. 제시된 알고리즘에서는 상용 LTE 신호에 포함된 기준 시퀀스인 cell-specific reference signal (CRS)를 구축된 자원 그리드에서의 2차원 상호 상관을 통해 지연 시간을 계산하였다. 지연 시간의 변화는 신호 도달 시간의 변화로 계산되어 알려진 BS의 위치로부터 UE와의 거리를 계산하는 과정에 사용할 수 있다. 제시된 알고리즘의 성능은 실제 환경에서의 상용 LTE 신호를 이용한 거리 계산 실험에 사용되어 평가되었다.

• 대한전자공학회논문지SD
• /
• 제45권8호
• /
• pp.1-10
• /
• 2008

본 논문에서는 새로운 스위칭 방식인 LFS (Local Field Switching)을 이용하여 설계한 128비트 MRAM (Magnetoresistive Random Access Memo교)에 대해 기술하였다. LFS 방식은 MTJ (Magnetic Tunnel Junction)를 직접 통과해 흐르는 전류에 의해 형성되는 국소 자기장을 이용하여 MTJ의 극성을 변환시킨다. 이 방식은 MTJ와 전류의 거리가 가깝기 때문에 작은 전류로도 충분히 큰 자기장을 형성하므로 writing current가 적어도 된다. 또한 Digit Line이 없어도 되므로 half select disturbance가 발생하지 않아 기존 MTJ를 이용한 방식에 비해 셀 선택도가 우수하다. 설계한 MRAM은 IT(트랜지스터)-1MTJ의 메모리 셀 구조를 가지며 양방향 write driver와 mid-point reference cell block, current mode sense amplifier를 사용한다. 그리고 MTJ 공정 없이 회로 동작을 확인하기 위해 LFS-MTJ cell을 CMOS emulation cell로 대체하였다. 설계한 회로를 6 metal을 사용하는 $0.18{\mu}m$ CMOS 공정으로 구현하였고 제작된 chip을 custom board 상에서 테스트하여 동작을 확인하였다.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.30-35
• /
• 2013

In order to increase cell efficiency in crystalline silicon solar cell, reduction of light reflection is one of the essential problem. Until now silicon wafer was textured by wet etching process which has random patterns along crystal orientation. In this study, high aspect ratio patterns are manufactured by nano imprint process and reflectance could be minimized under 1%. After that, screen printed solar cell was fabricated on the textured wafer and I-V characteristics was measured by solar simulator. Consequently cell efficiency of solar cell fabricated using the wafer textured by nano imprint process increased 1.15% than reference solar cell textured by wet etching. Internal quantum efficiency was increased in the range of IR wave length but decreased in the UV wavelength. In spite of improved result, optimization between nano imprinted pattern and solar cell process should be followed.

• 핵의학기술
• /
• 제12권1호
• /
• pp.82-87
• /
• 2008

Purpose: The Bio-energy metabolism control hormone by Adipocytokine is composed with Leptin, Adiponectin, resistin, TNF-a, IL-6. Adiponectin become known to participating in Insulin sensitivity exasperation, Fat metabolism accomodation and inducing metabolic disease such as diabetes mellitus, arteriosclerosis, hyperlipemia. When we accomplished the test with purpose of Research, we observed significance with a result of test related to diabetes mellitus with reference setting by way of suggestion. Methods: Result of normal group (n=100) which is committed in the SCL from September 2006 to December 2006 and result of control group (n=50) relationship examination item that is decided diabetes measures themselves against each other. Also, we measured the normal group against the control group for the reference range of adiponectin. Results: Result in normal group (n=100) appeared by Glucose (reference 70~120 mg/dl) Mean and the SD 96.99 (${\pm}24.35$), HbA1c (reference 4.0~6.0%) Mean and the SD 5.64 (${\pm}0.90$), Insulin (reference 2.0~25.0 uIU/ml) Mean and the SD 7.80 (${\pm}4.42$), the Adiponectin the Mean and the SD 9,861.23 (${\pm}4,977.0$). Result in control group(n=50) appeared by Glucose (reference 70-120 mg/dl) Mean and the SD 224.95 (5.30), the HbA1c (reference 4.0~6.0%) Mean and the SD 8.22 (1.63), Insulin (reference 2.0~25.0 uIU/ml) Mean and the SD 17.02 (3.01), C-peptide (reference 0.48~3.30 ng/ml) Mean and the SD 7.92 (${\pm}7.40$), the Adiponectin Mean and the SD 18,110.03 (${\pm}12,843.29$). Conclusions: Therefore, it seems that test results are significant and we consider that it can be apply to useful diagnosis of diabetes mellitus, arteriosclerosis, hyperlipemia patients throughout the reference range setting of Adiponectin, Leptin is one of the Bio-energy metabolism control hormone.

• Annals of Laboratory Medicine
• /
• 제38권6호
• /
• pp.503-511
• /
• 2018

Background: Sampling a healthy reference population to generate reference intervals (RIs) for complete blood count (CBC) parameters is not common for pediatric and geriatric ages. We established age- and sex-specific RIs for CBC parameters across pediatric, adult, and geriatric ages using secondary data, evaluating patterns of changes in CBC parameters. Methods: The reference population comprised 804,623 health examinees (66,611 aged 3-17 years; 564,280 aged 18-59 years; 173,732 aged 60-99 years), and, we excluded 22,766 examinees after outlier testing. The CBC parameters (red blood cell [RBC], white blood cell [WBC], and platelet parameters) from 781,857 examinees were studied. We determined statistically significant partitions of age and sex, and calculated RIs according to the CLSI C28-A3 guidelines. Results: RBC parameters increased with age until adulthood and decreased with age in males, but increased before puberty and then decreased with age in females. WBC and platelet counts were the highest in early childhood and decreased with age. Sex differences in each age group were noted: WBC count was higher in males than in females during adulthood, but platelet count was higher in females than in males from puberty onwards (P <0.001). Neutrophil count was the lowest in early childhood and increased with age. Lymphocyte count decreased with age after peaking in early childhood. Eosinophil count was the highest in childhood and higher in males than in females. Monocyte count was higher in males than in females (P <0.001). Conclusions: We provide comprehensive age- and sex-specific RIs for CBC parameters, which show dynamic changes with both age and sex.

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.528-537
• /
• 2010

A novel decision reference based method for the maximum power point tracking (MPPT) of PV arrays is presented in this paper. The proposed decision reference was derived from a simplified solar cell model. This method solves the problems of conventional MPPT algorithms, such as oscillation of the operating point at the steady state and confusion under rapidly changing insolation. It is shown by simulation and experimental results that the method properly tracks a rapidly changing insolation profile. The signal to noise ratio (SNR) of the new decision reference is also higher than those of conventional P&O and INC methods. An updating subroutine was included in the proposed MPPT algorithm to compensate for temperature and aging effects.

• 한국통신학회논문지
• /
• 제35권1A호
• /
• pp.54-61
• /
• 2010

본 논문에서는 셀룰러 환경에서 셀 간 간섭을 완화시키기 위한 부분공간 간섭 정렬 방법을 실제 시스템에 적용할 때 발생하는 채널 분리 오차와 채널 추정 오차에 따른 성능 열화를 개선시키기 위한 수신단 직교화를 통한 간섭 정렬 방법을 제안하였다. 제안된 방법은 셀 마다 서로 직교하는 참조 벡터를 사용함으로써 채널 분리 오차와 채널 추정 오차에 인해 남아있는 간섭신호를 줄여준다. 전산 모의 실험을 통해 채널 추정 오차가 발생하는 환경에서 제안된 방법을 통해 기존의 방법에 비해 향상된 합용량을 얻을 수 있었다.