• 대한방사선기술학회지:방사선기술과학
• /
• 제46권2호
• /
• pp.123-129
• /
• 2023

Interventional cardiology procedures can involve relatively high radiation doses compared to conventional radiography. During CAG, CAG + PCI and PCI the same area is exposed to radiation for a long period. In this study, radiation exposure data of 421 examinations in Gyeongsang area were collected, and the DRLs and ADs in actual medical practice for three types of interventional cardiology procedures in Korea were established. In CAG 286 case, 75th percentile DRLs and ADs of the total DAP were 55.89 Gy·cm² and 37.47 Gy·cm² , respectively. In CAG + PCI 92 case, those values were 222.84 Gy·cm² and 117.51 Gy·cm² respectively. In PCI 43 case, those values were 198.73 Gy·cm² and 120.13 Gy·cm² respectively. In this study, for the first time, the diagnostic reference level of interventional cardiology procedures in Gyeongsang area were established. Using the diagnostic reference level of interventional cardiology procedures derived from this study, it will help to identify and improve the level of exposure dose in the region and country.

• 한국환경복원기술학회지
• /
• 제26권5호
• /
• pp.33-46
• /
• 2023

In this study, carbon storage in the aboveground biomass, litter layer, and soil layer was calculated for abandoned mining restoration areas to determine the level of carbon storage after the restoration project through comparison with the ecological reference. Five survey sites were selected for each abandoned mining restoration area in Boryeong-si, Chungcheongnam-do, and the ecological reference that can be a goal and model for the restoration project. The carbon storage in the restoration area was 0~21.3Mg C ha^-1, the deciduous layer 3.3~6.0Mg C ha^-1, and the soil layer(0-30cm) 8.3~35.1Mg C ha^-1, showing a significant difference in carbon storage by target site. The total carbon storage was between 6.1 and 35.3% of the ecological reference, with restoration area ranging from 14.0 to 62.4 Mg C ha^-1. The total carbon storage in the restoration area and the ecological reference differed the most in the aboveground biomass and was less than 12%. Based on these results, forest restoration area need to improve the carbon storage of forests through continuous management and monitoring so trees can grow and restore productivity in the early stages of the restoration project. The results of this study can be used as primary data for preparing future forest restoration indicators by identifying the storage of abandoned mining restoration areas.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.373-376
• /
• 2001

This paper has been studied a real-time video frame data processing control that used the linear systolic array for motion estimation. The proposed data control processing provides to the input data into the multiple processor array unit(MPAU) from search area and reference block data. The proposed data control architecture has based on two slice band for input data processing. And it has no required external control logic blocks for input data as like reference block or search area data.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.3-7
• /
• 2004

Many countries have changed her geodetic reference system from local system to global system because of the global network's necessity. And, also Korean geodetic reference system changed from Tokyo datum to Global geodetic reference system since 2003 as the revision of Survey Law and Korean reference ellipsoid changed from Bessel 1841 ellipsoid to GRS80. The purpose of this paper is evaluation of ellipsoid agreement before and after change due to the introduction of global geodetic reference system in Korea. For the evaluation ellipsoid agreement was analyzed using two Korean geoid model -KOGD2003 and KOBGDM33- on both ellipsoid and area variation caused by change of reference ellipsoid was calculated.

• 대한전자공학회논문지SP
• /
• 제47권2호
• /
• pp.69-76
• /
• 2010

본 논문에서는 새로운 고속 다중 참조 프레임 움직임 추정 알고리즘을 제안한다. 제안된 알고리즘은 참조 프레임간의 거리와 움직임 벡터 간의 선형 관계를 이용하여 검색영역을 줄인다. 새로운 알고리즘은 0번 참조 프레임과 1번 참조 프레임에서는 전영역 움직임 추정을 사용한 후, 2번 참조 프레임, 3번 참조 프레임, 4번 참조 프레임에서는 0번 참조 프레임과 1번 참조프레임에서의 움직임 추정의 결과를 사용하여 검색 영역을 최소화 한다. 제안된 알고리즘은 문턱값을 사용하지 않기 때문에 하드웨어 구현과 프로세싱 스케줄을 지정하는 것이 용이하고 많은 연산량을 줄일 수 었다. 이러한 몇 가지 특징으로 인하여 제안된 알고리즘은 다중 참조 프레임 움직임 추정기의 하드웨어 구현에 용이하다. 시뮬레이션 결과는 제안된 알고리즘의 PSNR 감소와 bitrate의 증가가 기존의 고속 다중 창조 프레임 움직임 추정 알고리즘에 비해서 좋은 성능을 나타내고 있고, 연산량은 기존의 5장의 참조 프레임을 사용하는 전영역 검색 방법에 비해서 52.5%의 감소를 나타낸다.

• 한국환경복원기술학회지
• /
• 제11권3호
• /
• pp.74-86
• /
• 2008

To assessment the disturbances of the Namgang caused by dam construction, upstream area was selected for the reference reach and downstream area was selected for the comparison reach. And these reaches were surveyed and analyzed according to the assessment criteria of the river disturbances.The artificial factors of river disturbances were classified as river improvement works, dam construction and aggregate dredging. The indexes were physical factors as like epifaunal (bottom), embeddedness, velocity/depth regime, sediment deposition, channel flow status, channel alteration, frequency of riffles, bank stability, vegetative protection, riparian zone etc.The assessment results showed 46% of the assessment criteria which was serious status in dam downstream area and 89.5% of it which was excellent status in dam upstream.Finally, the results showed that physical river environment in downstream area was disturbed by the discharge control and the interception of sediment discharge by dam, consequently this disturbance give rise to impact of ecosystem in river.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.2066-2073
• /
• 2021

The use of nuclear reactors is a large studied possible solution for thermochemical water splitting cycles. Nevertheless, there are several problems that have to be solved. One of them is to increase the efficiency of the cycles. Hence, in this paper, a thermal energy optimization of a Sulfur-Iodine nuclear hydrogen production cycle was performed by means a heuristic method with the aim of minimizing the energy targets of the heat exchanger network at different minimum temperature differences. With this method, four different heat exchanger networks are proposed. A reduction of the energy requirements for cooling ranges between 58.9-59.8% and 52.6-53.3% heating, compared to the reference design with no heat exchanger network. With this reduction, the thermal efficiency of the cycle increased in about 10% in average compared to the reference efficiency. This improves the use of thermal energy of the cycle.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권3호
• /
• pp.207-214
• /
• 2021

A new positioning technique for positioning of LTE base stations is proposed. The positioning information of the base station is absolutely necessary for model-based wireless positioning, and is required in some of the various merhodologies for estimating signals in an uncorrected area when construnting a database for fingerprinting-based positioning. Using the acquired location-based Reference Signal Received Power (RSRP) information to estimate the location of the base station, it is impossible with the existing trilateration methods. Therefore, in this paper, a method using reference particles is proposed. Particles are randomly generated in the application area, and signal propagation modeling is performed assuming that a base station is located in each particle. Based on this, the errors of measurements are calculated. The particle group with the minimum measurement errors is selected, the position of the base station is estimated through weighted summation, and the signal propagation model of the corresponding base station is built at the same time. The performance of the proposed technology is verified using data acquired in Seocho-dong, Seoul.

• 전자공학회논문지SC
• /
• 제40권3호
• /
• pp.135-144
• /
• 2003

본 논문에서는 고속 혼성모드 집적회로를 위한 온-칩(on-chip) CMOS 전류 및 전압 레퍼런스 회로를 제안한다. 제안하는 전류 레퍼런스 회로는 기존의 전류 레퍼런스 회로에서 부정확한 전류 값을 조정하기 위해 주로 사용되는 아날로그 보정 기법과는 달리 디지털 영역에서의 보정 기법을 사용한다. 또한, 제안하는 전압 레퍼런스 회로는 고속으로 동작하는 혼성모드 집적회로의 출력단에서 발생할 수 있는 고주파수의 잡음 성분을 최소한으로 줄이기 위해 고주파 신호 성분에 대해 작은 출력 저항을 볼 수 있는 구조의 레퍼런스 전압 구동회로를 사용한다. 이 레퍼런스 전압 구동회로는 전력 소모 및 칩 면적을 최소화하기 위해서 저 전력의 증폭기와 크기가 작은 온-칩 캐패시터를 사용하여 구현하였다. 제안하는 레퍼런스 회로는 0.18 um n-well CMOS 공정으로 설계 및 제작되었으며, 250 um x 200 um의 면적을 차지한다. 칩 제작 및 측정결과, 제안하는 전류 및 전압 레퍼런스 회로는 공급 전압 및 온도의 변화에 대해서 각각 2.59 %/V와 48 ppm/℃의 변화율을 보인다.

• 한국측량학회지
• /
• 제30권3호
• /
• pp.241-247
• /
• 2012

우리나라에서는 2003년부터 세계측지계로 전환하였으며, 이에 따른 우리나라의 행정구역도상의 면적 변화를 살펴보기 위해 통계청에서 제공하는 센서스용 행정구역경계 자료를 이용하여 전국토를 대상으로 면적의 변화량을 계산하였다. 면적 계산 과정에서는 국토지리정보원에서 제시하는 표준절차를 이용하였으며, 전국 단일 원점TM좌표를 세계측지계로 변환한 후 타원체면 및 투영평면상에서 면적을 대상으로 하였다. 광역시도행정경계가 우리나라 직각좌표의 두 개 이상의 원점에 해당하는 경우에는 각 좌표계의 경계선을 기준으로 행정경계를 개별 폴리곤으로 분할한 후 별도의 원점을 기준으로 투영하였다. 세계측지계 변환 후 모든 행정경계가 북서방향으로 이동함으로써 결과적으로 우리나라 전체 면적이 투영평면 기준으로 $1.36km^2$(약 0.0013%) 감소하는 것으로 나타났다. 이는 타원체의 장반경이 확대됨으로 인한 면적증가보다 행정경계의 경위도 좌표가 고위도로 변경됨으로 인한 면적감소가 크기 때문으로 판단된다. 각 행정구역별 면적변화율은 고위도에 위치한 광역시도가 더 민감하게 반영되었다. 이와는 별도로 통계청에서 제공하는 행정구역경계 자료로부터 계산된 면적은 국토해양부의 국토해양통계 자료와 상당한 차이를 보이고 있으며 이에 대한 일원화가 진행되어야 할 것으로 판단된다.