• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.117-131
• /
• 2006

A coupled T-H-M(Thermo-Hydro-Mechanical) analysis was carried out for KENTEX (KAERI Engineering-scale T-H-M Experiment for Engineered Barrier System), which is a facility for validating the coupled T-H-M behavior in the engineered barrier system of the Korean reference HLW(high-level waste) disposal system. The changes of temperature, water saturation, and stress were estimated based on the coupled T-H-M analysis, and the influence of the types of mechanical constitutive material laws was investigated by using elastic model, poroelastic model, and poroelastic-plastic model. The analysis was done using ABAQUS, which is a commercial finite element code for general purposes. From the analysis, it was observed that the temperature in the bentonite increased sharply for a couple of days after heating the heater and then slowly increased to a constant value. The temperatures at all locations were nearly at a steady state after about 37.5 days. In the steady state, the temperature was maintained at $90^{\circ}C$ at the interface between the heater and the bentonite and at about $70^{\circ}C$ at the interface between the bentonite and the confining cylinder. The variation of the water saturation with time in bentonite was almost same independent of the material laws used in the coupled T-H-M processes. By comparing the saturation change of T-H-M and that of H-M(Hydro-Mechanical) processes using elastic and poroelastic material mod31 respectively, it was found that the degree of saturation near the heater from T-H-M calculation was higher than that from the coupled H-M calculation mainly because of the thermal flux, which seemed to speed up the saturation. The stresses in three cases with different material laws were increased with time. By comparing the stress change in H-M calculation using poroelasetic and poroelasetic-plastic model, it was possible to conclude that the influence of saturation on the stress change is higher than the influence of temperature. It is, therefore, recommended to use a material law, which can model the elastic-plastic behavior of buffer, since the coupled T-H-M processes in buffer is affected by the variation of void ratio, thermal expansion, as well as swelling pressure.

• The Korean Journal of Pharmacology
• /
• v.30 no.3
• /
• pp.273-289
• /
• 1994

Reversible brain ischemia was produced by occluding both common carotid arteries for 5 min, and the effects of aminoguanidine (AG), $DL-{\alpha}-difluoromethylornithine$ (DFMO), MK-801, and nimodipine (NM) on the ischemia induced changes of the polyamine, glutamate and acetylcholine levels in the hippocampus CA1 subfield and the specific $[^3H]\;MK-801$ binding to the hippocampus synaptosomal membranes were studied with a histological reference of the cresyl violet stained hippocampus. The basal putrescine level $(PT:\;74.4{\pm}8.8\;nM)$ showed a rapid increase (up to 1.7 fold) for 5 min of ischemia, remained significantly increased for 6 h, and then resumed the further increase to amount gradually up to about 3 fold 96 h after recirculation. However, the level of spermidine was little changed, and the spermine level showed a transient increase during ischemia followed by a sustained decrease to about 40% of the preischemic level after recirculation. The increase of PT level induced by brain ischemia was enhanced with AG or MK-801, but it was reduced by DFMO or NM. The basal glutamate level $(GT:\;0.90{\pm}0.l4\;{\mu}M)$ rapidly increased to a peak level of $8.19{\pm}1.14\;{\mu}M$ within 5 min after onset of the ischemia and then decreased to the preischemic level in about 25 min after recirculation. And NM reduced the ischemia induced increase of GT level by about 25%, but AG, DFMO and MK-801 did not affect the GT increase. The basal acetylcholine level $(ACh:\;118.0{\pm}10.5\;{\mu}M)$ did little change during/after brain ischemia and was little affected by AG or NM. But DFMO and MK-801, respectively, produced the moderate decrease of ACh level. The specific $[^3H]\;MK-801$ binding to the hippocampus synaptosomal membrane was little affected by brain ischemia for 5 min. The control value (78.9 fmole/mg protein) was moderately decreased by AG and MK-801, respectively but was little changed by DFMO or NM. The microscopic findings of the brains extirpated on day 7 after ischemia showed severe neuronal damage of the hippocampus, particularly CA1 subfield. NM and AG moderately attenuated the delayed neuronal damage, and DFMO, on the contrary, aggravated the ischemia induced damage. However, MK-801 did not protect the hippocampus from ischemic damage. These results suggest that unlike to the mode of anti-ischemic action of NM, AG might protect the hippocampus from ischemic injury as being negatively regulatory on the N-methyl-D-aspartate (NMDA) receptor function in the hippocampus.

• Journal of Korean Society of Archives and Records Management
• /
• v.2 no.1
• /
• pp.41-66
• /
• 2002

This paper examines urgent issues of establishing the presidential library in relation to the current standing of the Government Archives and Records Service. As government records have been tremendously accumulated every year, the Government Archives and Records Service will be full within three years, which indicates that the constructing of new storage repositories is an emergent issue. In addition, presidential records are one of the most significant and influential public properties for preserving historical value and interpretation at the national level. Some serious concerns relating to the presidential library are raised for consideration. First of all, it is compulsory to preserve presidential records and to construct the presidential library. Second, the presidential library performs a variety of functions including the acquisition, preservation, access, reference, research, education, and display of presidential records as well as exhibits of public activities and administration personally and in public during the president' regime. A new presidential library should function as both of a depository and museum of presidential records through systematic arrangement and display. Thus a new repository of the Government Archives and Records Service should be co-constructed with the presidential library within the same boundary. Third, a newly constructed presidential library should be at least double- or triple- sized more than estimated in order to contain all related holdings. Fourth, to take custody of public records across the legislature, judiciary and administration, the Government Archives and Records Service should be directed by an official at the level of vice-minister and upgraded to an independent office such as "National Archives and Records Administration." Fifth, the presidential library's location and surrounding environments should be selected with careful planning.

• Journal of Science of Art and Design
• /
• v.5
• /
• pp.87-129
• /
• 2003

The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

• Sijohaknonchong
• /
• v.26
• /
• pp.25-54
• /
• 2007

This paper examines the literatherapy effects of Korea's oldest form of literature, Sijo, and its role in the future of literatherapy. Since literature is the expression of human emotions, and therapy is related to medicine, the two seem to have little in common, but they share the function of resolving conflicts. The effectiveness of literatherapy has only recently become a matter of discussion. However, literatherapy is greatly involved with the utility value of literature, and should be taken seriously. This research focused on the literatherapy function of the 16th-17th century Gangho-Sijo. Gangho-Sijo was created by literary men from the Sarim-school, who were removed from their posts in the government due to a massacre(Sawha) and rianly(Dangjaing), and spent most of their time away from politics. Their Sijo were mostly about life in retreat, and their mental state at that time. In relation to literatherapy, the mentality and attitudes of these scholars can be divided into three stages. The first is anxiety and depression, the second tranquility and harmony. and the third serenity. At the final stage, the scholars are liberated from worldly desires. Each of these phases hold the effect of literatherapy. The first stage can relate to 'theory of purgation', ISO-Prinsip, which is based on 'like cures like' which means to treat something with its own kind Fight fire with fire. The second step involves 'theory of purification', and by balancing his emotions, the scholar can achieve mental stability. In the final stage, literatherapy is acquired when the scholar expresses his emotions in a clarification(theory of clarification). At this phase, literatherapy finally has an effect, while the phase itself functions as literatherapy as well. The study of literatherapy is still at its early stages, thus has many limitations. However, literatherapy has bright prospects, and it is my hope that this report will be used as a reference for its further research.

• Korean Journal of Environment and Ecology
• /
• v.34 no.4
• /
• pp.334-344
• /
• 2020

A total of 24 families, 44 species, and 658 benthic macroinvertebrates were identified, and Ecdyonurus dracon Kluge (13%) was the dominant species in forested streams within the Yeonyeopsan (Mt.). A total of four habit categories (i.e., clingers (56%), burrowers (19%), swimmers (14%), and sprawlers (56%)) were identified, and clingers were the dominant habit at all survey points except point one (UP1). Habitat characteristics were depended on the hydraulic factors (e.g., flow velocity, depth, and substrates), water quality (e.g., DO and water temperature), and the habitat characteristics were differed in the riffle, which has a faster the flow velocity, compared by in the stagnant pool. In other words, in riffles, the clingers dominated in high flow velocity with the large maximum and median grain size for substrates in the habitats regardless of depth, but the burrowers and sprawlers were dominant in low flow velocity with the small maximum and median grain size for substrates in the habitats. Moreover, DO and flow velocity were in positive correlation (y = 0.6666x - 0.659, R² = 0.0851), and the habitat for burrowers was wider than that for sprawlers or clingers. The water depth was negatively correlated with water temperature (y = -26.397x + 283.87, R² = 0.1802) since the water temperature is more sensitive to insolation in shallow depth. pH was positively correlated with water temperature. The investigation of the habitat characteristics by separating the relations between pH and DO in upstream and downstream showed the low pH and high DO in the upstream with a high crown density of 68%, regardless of community composition. On the other hand, high pH and low DO in the downstream with a relatively low crown density of 51%. It was considered that the riparian forest played a role in suppressing the growth of attached algae and the controlling water temperature in headwater streams. Our findings identified the habitat characteristics of benthic macroinvertebrates in a headwater stream. We expected that the finding can provide reference data for suggesting conservation and management plans in a headwater stream and increasing academic value.

• Progress in Medical Physics
• /
• v.22 no.2
• /
• pp.99-105
• /
• 2011

The purpose of this study is to evaluate the accuracy of IMRT in our clinic from based on TG119 procedure and establish action level. Five IMRT test cases were described in TG119: multi-target, head&neck, prostate, and two C-shapes (easy&hard). There were used and delivered to water-equivalent solid phantom for IMRT. Absolute dose for points in target and OAR was measured by using an ion chamber (CC13, IBA). EBT2 film was utilized to compare the measured two-dimensional dose distribution with the calculated one by treatment planning system. All collected data were analyzed using the TG119 specifications to determine the confidence limit. The mean of relative error (%) between measured and calculated value was $1.2{\pm}1.1%$ and $1.2{\pm}0.7%$ for target and OAR, respectively. The resulting confidence limits were 3.4% and 2.6%. In EBT2 film dosimetry, the average percentage of points passing the gamma criteria (3%/3 mm) was $97.7{\pm}0.8%$. Confidence limit values determined by EBT2 film analysis was 3.9%. This study has focused on IMRT commissioning and quality assurance based on TG119 guideline. It is concluded that action level were ${\pm}4%$ and ${\pm}3%$ for target and OAR and 97% for film measurement, respectively. It is expected that TG119-based procedure can be used as reference to evaluate the accuracy of IMRT for each institution.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.49-55
• /
• 2008

This study aims to conduct the comparative analysis of the radiation dose according to before and after the calibration of the ionization chamber used for measuring radiation dose in the MDCT, as well as of $CTDI_w$ according to temperature and pressure correction factors in the CT room. A comparative analysis was conducted based on the measured MDCT (GE light speed plus 4 slice, USA) data using head and body CT dosimetric phantom, and Model 2026C electrometer (RADICAL 2026C, USA) calibrated on March 21, 2007. As a result, the $CTDI_w$ value which reflected calibration factors, as well as correction factors of temperature and pressure, was found to be the range of $0.479{\sim}3.162mGy$ in effective radiation dose than the uncorrected values. Also, under the routine abdomen routine CT image acquisition conditions used in reference hospitals, patient effective dose was measured to indicate the difference of the maximum of 0.7 mSv between before and after the application of such factors. These results imply that the calibration of the ion chamber, and the correction of temperature and pressure of the CT room are crucial in measuring and calculating patient effective dose. Thus, to measure patient radiation dose accurately, the detailed information should be made available regarding not only the temperature and pressure of the CT room, but also the humidity and recombination factor, characteristics of X-ray beam quality, exposure conditions, scan region, and so forth.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.4
• /
• pp.535-541
• /
• 2010

Excessive intake of sodium is known as a risk factor for hypertension, and Korean adults consume sodium 3 times higher than Dietary Reference Intakes (DRIs). The purpose of this study was to evaluate the difference on sodium content between analyzed and estimated by food composition table and food exchange list. Seven days of low salt diet and seven days of high salt diet were prepared, and sodium contents were estimated by food composition table and food exchange list and measured by atomic absorption spectrophotometer. Sodium contents of diet per day estimated by food exchange list significantly differed from analyzed content, but those estimated by food composition table were not. However, when absolute differences from analyzed content were compared by dishes in the low and high salt diet periods, there were significant differences among estimated sodium content by food composition table and food exchange list and analyzed sodium content. The discrepancy between those results was due to that absolute value was used to compare sodium contents of dishes but not to compare sodium contents of days. In addition, main dish, side dish, and soup were significantly different among estimated sodium content by food composition table and food exchange list and analyzed sodium content. Actual sodium contents of Jap-Chae Deop-Bap and Roasted chicken with oyster sauce differed to a great extent from estimated contents by food exchange list and food composition table. In conclusion, actual sodium contents of Korean dishes were significantly different from those estimated by food composition table and food exchange list, and thus these differences in salt content should be considered on planning of low-salt menu for hypertensive patients.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.3
• /
• pp.123-129
• /
• 1999

Initial electrochemical characteristics of $LiCoO_2$ electrode for lithium ion battery with various content of super s black as conductive material were evaluated through the charge/discharge with the potential range of 4.3V to 2.0V versus $Li^+/Li^+$. The rate of C/4 and C/2 by the 3 electrode test cell composed with an electrolytic solution of 1 mol/l $LiPF_6/EC+DEC(1:3\;by\; weight)$. Lithium was used as reference electrode. High impedance charge behavior was observed at early stage of charge. In the case of $3\%w/w$ of super s black as conductive material, the specific resistance of the high impedance releasing was $3.82\;{\Omega}\;{\cdot}\;g-LiCoCo_2$ at the current density of $0.5 mA/cm^2$, which corresponds 7 times of the specific resistance of electrode $(0.728 g-LiCoO_2)$. At second charge, the specific resistance of the high impedance releasing was 63 mn · g-Lico02, which corresponds 12eio of the specific resistance of electrode and only $1.7\%$ of that of the first charge. The first charge and discharge specific capacities at C/4 rate were 160-161 and $153\~155mAh/g-LiCoO_2$, respectively, to lead $95.4\~96.4\%$ of coulombic efficiencies and ca. $6 mAh/g-LiCoO_2$ of initial irreversible specific capacity. Specific resistance at the end of charge and rest showed low value at content of super s black between 2 and $7\%w/w$, which agreed with characteristics of irreversible specific capacity. Capacity densities were reduced by the increasing the content of conductive material. They were 447 and 431mAh/ml when 2 and $2.9\%w/w$ of super s black were used, respectively, at the rate of C/4.