• Convergence Security Journal
• /
• v.6 no.4
• /
• pp.91-99
• /
• 2006

Generally, a study of web caching is conducted on a performance improvement with structural approaches and a new hybrid method using existing methods, and studies on caching method itself. And existing analysis of reference-characteristic are conducted on a history analysis and a preference of users, a view point of data mining by log analysis. In this study, we analyze the reference-characteristic of web object on a view point of a characteristic of probability-distribution and a mean value of lifetime of a web-object. And using this result, we propose the new method for a performance improvement of a web-caching.

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.231-236
• /
• 2005

Calibration capability was evaluated using the reference-grade platinum resistance thermometer (PRT) in the temperature range of $-50^{\circ}C$ to $250^{\circ}C$ for the national calibration centers. The reference-grade PRT was calibrated at the several fixed points, which was composed by the freezing points of Sn, In, the melting point of Ga and the triple point of water and Hg, before and after the round-robin test (RRT) experiments. The temperature scale of reference-grade PRT was compared to the local standard PRT's using the system of the national calibration centers. $E_{n}$ values was calculated by the temperature difference between the reference-grade PRT and the local standard PRT, and the best measurement capability. Finally, the capability of the national calibration centers was evaluated by the $E_{n}$ values.

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.2
• /
• pp.47-58
• /
• 2002

This research suggested the mathematical model (forward kinematics method) to provide the reference points of driver space more easily and accurately in designing the package layout of vehicle interiors. For this purpose, the lengths of body segments of drivers and various joint angles occurred while were used. The length data between joints for the mathematical model were extracted from $SAFEWORK^{\circed{R}}$ as well as 95th percentile male and 5th percentile female body dimensions were utilized. In addition, the angles of body segments were applied on its diverse values within proper ranges in order to compare them each other. the mathematical model in this study was based on the concept of converting polar coordinate system to Cartesian coordinate system so that reference points of driver space were acquired in Cartesian coordinate system after using the segment lengths of drivers and the joint angles of driving postures as an input of polar coordinate system. It is expected that reference points of driver space obtained from this research are helpful to the study on package layout that is appropriate for physical characteristics of drivers.

• Smart Structures and Systems
• /
• v.4 no.4
• /
• pp.391-406
• /
• 2008

This study attempts to develop a real-time debonding monitoring system for carbon fiber-reinforced polymer (CFRP) strengthened structures by continuously inspecting the bonding condition between the CFRP layer and the host structure. The uniqueness of this study is in developing a new concept and theoretical framework of nondestructive testing (NDT), in which debonding is detected without relying on previously-obtained baseline data. The proposed reference-free damage diagnosis is achieved based on the concept of time reversal acoustics (TRA). In TRA, an input signal at an excitation point can be reconstructed if the response signal measured at another point is reemitted to the original excitation point after being reversed in the time domain. Examining the deviation of the reconstructed signal from the known initial input signal allows instantaneous identification of damage without requiring a baseline signal representing the undamaged state for comparison. The concept of TRA has been extended to guided wave propagations within the CFRP-strengthened reinforced concrete (RC) beams to improve the detectibility of local debonding. Monotonic and fatigue load tests of large-scale CFRP-strengthened RC beams are conducted to demonstrate the potential of the proposed reference-free debonding monitoring system. Comparisons with an electro-mechanical impedance method and an inferred imaging technique are provided as well.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.8-14
• /
• 2013

As GNSS(Global Navigation Satellite System) is used in various filed, many countries establish GNSS system independently. But GNSS system has the limitation of accuracy and stability in stand-alone mode, because this system has error elements which are ionospheric delay, tropospheric delay, orbit ephemeris error, satellite clock error, and etc. For overcome of accuracy limitation, the DGPS(Differential GPS) and RTK(Real-Time Kinematic) systems are proposed. These systems perform relative positioning using the reference and user receivers. ETRI(Electronics and Telecommunications Research Institute) is developing precision navigation system in point of extension of GNSS usage. The precision navigation system is for providing the precision navigation solution to common users. If this technology is developed, GNSS system can be used in the fields which require precision positioning and control. In this paper, we introduce the precision navigation system and perform design and algorithm verification.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.692-698
• /
• 1999

This paper analyzes the effect of DGS(Dispersed Generation System) on the voltage regulation of the traditional distribution system of which the voltage is controlled by the bank LDC(Line Drop Compensator). Through the simulation results for 22.9kV class distribution system with DGSs, some general relationships among the operating power factor and introduction limit of DGS, and the sending-end reference voltage determined by internal setting coefficients of the LDC are derived. Those relationships are that the introduction limit of DGS increases as the power factor of DGS goes from lagging to leading and also as the allowance of the sending-end reference voltage increases. From the relationships, a operation method of the power distribution system integrated with DGSs is proposed from the view point of the operating power factor of DGS and new voltage regulation method.

• Journal of Acupuncture Research
• /
• v.30 no.1
• /
• pp.13-22
• /
• 2013

Objectives : The aim of this study was to show the application to add the Dong-Qi therapy of the Dong-Si acupuncture to exercise therapy of the movement system impairment syndrome(MSIS) and to determine the best acupuncture point for the Dong-Qi therapy. Methods : We reviewed Diagnosis and Treatment of Movement Impairment Syndrome and Movement System Impairment Syndromes Of The Extremities, Cervical and Thoracic Spines written by Sahrmann SA. to show the exercise therapy of the sort of MSIS. We reviewed complete works of Yang Wei Jie to show the acupuncture points of the Dong-Si acupuncture and the Dong-Qi therapy. Results : We showed the acupuncture point of the Dong-Si acupuncture by each type of MSIS based on the reference book of MSIS, the Dong-Si acupuncture. Also, we selected and tabulated the best possible acupuncture point of the Dong-Si acupuncture which could minimize a side effect of acupuncture during the therapeutic exercise by each type of MSIS. Conclusion : A specific acupuncture point of the Dong-Si acupuncture could be chosen for a specific MSIS therapeutic exercise. The best possible acupuncture point could be chosen when selecting an acupuncture point of the Dong-Si acupuncture.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.976-979
• /
• 2005

This paper is about the development of automatic FPC(flexible printed circuit) punching instrument for the improvement of working condition and cost saving. FPC is used to detect the contact position of keyboard and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation Is done manually, the accuracy of the punching degree is varied with operator's condition. To improve this manual punch ing operation to the FPC, automatic FPC punching system is introduced. Test algorithms and programs showed good results to the designed automatic punching system and led to the increasement of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Journal of Advanced Marine Engineering and Technology
• /
• v.16 no.4
• /
• pp.50-59
• /
• 1992

The paper presents a digital speed control approach of induction motor systems by using a digital servo control method and a well-known second order differential equation as model. The basic concept of using the modeling equation stated in the above is induced from the control theory stand point such that we can describe usually the motor system connected by inverter, generator and load etc, just as a mechanical system to be controlled. The concept does not demand us the complicated vector-based modeling equation adopted in the traditional methods for the speed control of induction motor. Futhermore, the proposed speed control system can be treated as a single input and single output system. The effectiveness of the servo control system obtained by the above-mentioned design concept is illustrated by the experimental results in the presence of both step reference changes and load variations. It is observed from the experimental results that the steady state-error of the experimental set up becomes zero after some regulation time and the induction motor system is robust in spite of reference signal changes and load variations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1183-1188
• /
• 2005

In this paper, we propose a 3D automated measuring system which measures the mandibular movements and the reference plane of the jaw movements. In diagnosis and treatment of the malocclusions, it is necessary to estimate the mandibular movements and the reference plane of the jaw movements. The proposed system is configured with double stereo-cameras, PC, two moving pattern plates(MPPs), two fixed pattern plates(FPPs) and one orbital marker. The virtual pattern plate is applied to calculate the homogeneous transformation matrices which describe the coordinates systems of the FPP and MPP with respect to the world coordinates system. To estimate the parameters of the hinge axis, the Euler's theorem is applied. The hinge axis points are intersections between the FPPs and the hinge axis. The coordinates of a hinge axis point with respect to the MPP coordinates system are set up to fixed value. And then, the paths of the jaw movement can be calculated by applying the homogeneous transformation matrix to fixed hinge axis point. To examine the accuracy of the measurements, experiments of measuring the hinge axis points and floating paths of them are performed using the jaw motion simulator. As results, the measurement errors of the hinge axis points are within reasonable boundary, and the floating paths are very similar to the simulator's moving path.