• 한국산학기술학회논문지
• /
• 제13권6호
• /
• pp.2812-2825
• /
• 2012

본 연구의 목적은 법학전문도서관의 기존사례 분석을 통하여 공간구성 특성을 조사, 규정하고 교육이념에 부응하는 법학전문도서관 특성을 반영한 계획안의 제시함으로서 법학전문도서관의 계획요소 및 디자인을 제안하고자 하였다. 법학도서관의 공간구성특성을 요약하면 (1) 접근성을 고려한 진입층의 공간구성 (2) 열람공간 이용자 중심의 열람실 공간구성 (3) 교육 및 연구 공간과 열람실의 연계성을 고려한 공간 구성으로 법학도서관의 특성을 규정할 수 있다. 이러한 결과를 토대로 한 법학도서관 설계 시 다음과 같은 디자인 쟁점사항을 도출하였다. 진입층 공간구성은 교육의 장소로서의 이용행태, 접근성과 연계성의 측면을 고려하여 공용공간과 함께 열람공간을 계획하여야 한다. 이용자 중심의 열람실과 서고의 공간구성이 계획되기 위한 방법으로는 일반열람실 또는 지정 도서실이 진입공간과 직접 연계되는 계획이 이루어 져야 된다. 교육 및 연구 공간과 열람실이 유기적으로 연결되어야 함에 따라서 코어를 중심으로 교육 및 연구 공간과 열람실을 수직적으로 연계하여 열람실과 교육 연구 공간의 연계성을 높이는 동시에 외부에서의 접근성도 고려한 계획이 되어야한다.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권2호
• /
• pp.79-86
• /
• 2017

Precise Point Positioning-Real Time Kinematic (PPP-RTK) refers to a technology that combines PPP with network-RTK in which a user does not directly receive observed data from a reference station but receives State-Space Representation (SSR) messages corrected for error components from a central processing station through Networked Transport of RTCM via Internet Protocol (NTRIP) or Digital Multimedia Broadcasting (DMB) for purposes of positioning. SSR messages, which refer to corrections used in PPP-RTK, are generated by a central processing station using real-time observed data collected from reference stations and account for corrections needed due to the ionosphere, troposphere, satellite orbital errors, satellite time offsets, and satellite biases. This study used a type of SSR message provided in South Korea, known as Korea-SSR (K-SSR), to implement a PPP-RTK algorithm based on code-pseudorange measurements and validated its accuracy within the reference station network. In order to validate the accuracy of the implemented algorithm outside of the network, the K-SSR was extrapolated and applied to positioning in reference stations in Changchun, China (CHAN) and Japan (AIRA). This also entailed a quantitative evaluation that measured improvements in accuracy in comparison with point positioning. The results of the study showed that positioning applied with extrapolated K-SSR correction data was more accurate in both AIRA and CHAN than point positioning with improvements of approximately 20~50%.

• 대한치과교정학회지
• /
• 제46권6호
• /
• pp.356-363
• /
• 2016

Objective: The additional arch length required for leveling (AALL) the curve of Spee (COS) can be estimated by subtracting the two-dimensional (2D) arch circumference, which is the projection of the three-dimensional (3D) arch circumference onto the occlusal plane, from the 3D arch circumference, which represents the arch length after leveling the COS. The purpose of this study was to determine whether the cusp tips or proximal maximum convexities are more appropriate reference points for estimating the AALL. Methods: Sixteen model setups of the mandibular arch with COS depths ranging from 0 mm to 4.7 mm were constructed using digital simulation. Arch circumferences in 2D and 3D were measured from the cusp tips and proximal maximum convexities and used to calculate the AALL. The values obtained using the two reference points were compared with the paired t -test. Results: Although the 3D arch circumference should be constant regardless of the COS depth, it decreased by 3.8 mm in cusp tip measurements and by 0.4 mm in proximal maximum convexity measurements as the COS deepened to 4.7 mm. AALL values calculated using the cusp tips as reference points were significantly smaller than those calculated using the proximal maximum convexities (p = 0.002). Conclusions: The AALL is underestimated when the cusp tips are used as measurement reference points; the AALL can be measured more accurately using the proximal maximum convexities.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권2호
• /
• pp.71-76
• /
• 2013

Objectives: In three-dimensional computed tomography (3D-CT), the cant is evaluated by measuring the distance between the reference plane (or line) and the tooth. The purpose of this study was to determine the horizontal skeletal reference plane that showed the greatest correlation with clinical evaluation. Materials and Methods: The subjects were 15 patients who closed their eyes during the CT image taking process. The menton points of all patients deviated by more than 3 mm. In the first evaluation, clinical cant was measured. The distance from the inner canthus to the ipsilateral canine tip and the distance from the eyelid to the ipsilateral first molar were obtained. The distance between the left and right sides was also measured. In the second evaluation, skeletal cant was measured. Six reference planes and one line were used for the evaluation of occlusal cant: 1) FH plane R: Or.R - Or.L - Po.R; 2) FH plane L: Or.R - Or.L - Po.L; 3) F. Ovale plane R: Rt.F.Ovale - Lt.F.Ovale - Or.R; 4) F. Ovale plane L: Rt.F.Ovale - Lt.F.Ovale - Or.L; 5) FZS plane R: Rt.FZS - Lt.FZS - Po.R; 6) FZS plane R: Rt.FZS - Lt.FZS - Po.L, and; 7) FZS line: Rt.FZS - Lt.FZS. Results: The clinical and skeletal cants were compared using linear regression analysis. The FH plane R, FH plane L, and FZS line showed the highest correlation (P<0.05). Conclusion: The FH plane R and FH plane L are the most appropriate horizontal reference plane in evaluation of occlusal cant on 3D-CT.

• Journal of Ginseng Research
• /
• 제35권4호
• /
• pp.487-496
• /
• 2011

Good manufacturing practice (GMP)-based quality control is an integral component of the common technical document, a formal documentation process for applying a marketing authorization holder to those countries where ginseng is classified as a medicine. In addition, authentication of the physico-chemical properties of ginsenoside reference materials, and qualitative and quantitative batch analytical data based on validated analytical procedures are prerequisites for certifying GMP. Therefore, the aim of this study was to propose an authentication process for isolated ginsenosides $Rb_1$ and $Rg_1$ as reference materials (RM) and for these compounds to be designated as RMs for ginseng preparations throughout the world. Ginsenoside $Rb_1$ and $Rg_1$ were isolated by Diaion HP-20 adsorption chromatography, silica gel flash chromatography, recrystallization, and preparative HPLC. HPLC fractions corresponding to those two ginsenosides were recrystallized in appropriate solvents for the analysis of physico-chemical properties. Documentation of the isolated ginsenosides was made according to the method proposed by Gaedcke and Steinhoff. The ginsenosides were subjected to analyses of their general characteristics, identification, purity, content quantitation, and mass balance tests. The isolated ginsenosides were proven to be a single compound when analyzed by three different HPLC systems. Also, the water content was found to be 0.940% for $Rb_1$ and 0.485% for $Rg_1$, meaning that the net mass balance for ginsenoside $Rb_1$ and $Rg_1$ were 99.060% and 99.515%, respectively. From these results, we could assess and propose a full spectrum of physicochemical properties for the ginsenosides $Rb_1$ and $Rg_1$ as standard reference materials for GMP-based quality control.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.405-410
• /
• 2004

In mid-90's, the Korean government introduced the GIS(Geographic Information System) to digitalize every topography of national land and thereby, index locations and attributes of various urban facilities to construct a system whereby every information could be managed and operated in an integrated way, but the reliability of such geographic information has yet to be tested, much less its modification, complementation and maintenance. Under such circumstances, this study was aimed at constructing a reference point infrastructure for Seoul and Kyonggi area and comparing the data obtained from the GPS operation and various facility location data with the existing GIS data to address the problems of GIS operation and suggest their solutions. As a result of calculating the GPS reference point data and analyzing the deviations of the unknown point data in comparison with the fixed point ones, it was found that the horizontal location values were reliable within +/- 5cm, but that the above-sea level values varied as much as 1.4m depending on the deployment of pre-set fixed points determined by the direct level gauging. In addition, as a result of directly surveying major facilities around the roads based on the coordinates of the urban reference points networked with such a reference point system to check their conformity to existing data, it was confirmed that the difference was as wide as 2m. Such differences may be attributable to the fact that the data with their geographic information not confirmed are used as basic data for GIS. Hence, this study suggests the ways to set the absolute geographic data based on reference points and test the reliability of existing data and thereby, suggests a methods to solve the problems.

• 정보관리연구
• /
• 제37권2호
• /
• pp.109-136
• /
• 2006

시맨틱 웹의 발전은 정보의 규격화, 의미화를 통한 지식을 기본으로 이루어지며, 온톨로지는 이러한 지식표현을 위해 필수적으로 사용되는 도구이다. 온톨로지상에서 개체(Individual)들은 URI(Uniform Resource Identifier)를 이용하여 유일하게 지칭될 수 있어야 한다. 예를 들어, 국가 R&D 기반정보를 모델링하고, 이를 이용하고자 하는 경우에 URI 기반의 온톨로지 설계와 구현이 필수적으로 요구된다. 그렇지만, 식별체계나 URI를 사용하기 위해서는 방대한 인적 물적 자원의 투입이 불가피하여 과학기술문헌상의 인력정보를 식별체계 기반으로 구축하고자 하는 시도가 미약한 실정이었다. 이에 본 연구는 과학기술문헌을 포함한 국가 R&D 기반정보 온톨로지 구축에서 핵심이 되는 인력정보를 포함한 다양한 정보들을 URI 기반으로 구축, 관리, 서비스하는 방법을 기술한다. 약 7,000여건의 국내학술대회 논문들로부터 획득한 기반정보는 추론 서비스를 통해 연구자 네트워크 분석, 성과통계 등 다양한 시맨틱 웹 응용 분야들에 적용된다.

• International Journal of Aeronautical and Space Sciences
• /
• 제6권1호
• /
• pp.44-51
• /
• 2005

To provide more accurate and reliable positioning and timing services to Korean nationwide users, the Ministry of Maritime Affairs and Fisheries of Korea is implementing Korean NDGPS (Nationwide DGPS), which is operational partly. And it also has a plan to construct WADGPS (Wide Area Differential GPS) system using sites and equipments of the NDGPS reference stations. For that, Seoul National University GNSS Laboratory is implementing and testing prototypes of WRS (Wide-area Reference Station) and WMS (Wide-area Master Station). Until now, because there are not enough installed WRSs to be used for computing wide area correction information, we cannot test algorithms of WMS with the data processed actually in WRSs. Therefore to evaluate the performance of the algorithms, we made a MATLAB program which can process RINEX (Receiver INdependent Exchange) format data with WADGPS algorithm. Using that program which consists of WRS, WMS and USER modules, we processed the data collected at NDGPS reference stations, which are saved in RINEX format. In WRS module, we eliminate the atmospheric delay error from the pseudorange measurement, smooth the measurement by hatch filter and calculate pseudorange corrections for each satellite. WMS module collects the processed data from each reference stations to generate the wide area correction information including estimated satellite ephemeris errors, ionospheric delays at each grid point, UDRE (User Differential Range Error), GIVE (Grid Ionosphere Vertical Error) and so on. In USER part, we use the measurements of reference stations as those of users and estimate the corrected users' positions and protection levels (HPL, VPL). With the results of estimation, we analyzed the performance of the algorithms. We assured the estimated UDRE /GIVE values and the protection levels bound the corresponding errors effectively. In this research, we can expect the possible performance of WADGPS in Korea, and the developed modules will be useful to implementation and improvement of the algorithms.

• 한국통신학회논문지
• /
• 제40권1호
• /
• pp.165-170
• /
• 2015

본 논문은 3D 위치 정보를 산출하기 위한 기압고도계 및 기준국을 이용한 절대 고도 측정 정확도 향상에 관한 연구이다. GPS와 같은 위성 항법 시스템이 신뢰성이 있는 절대 고도를 제공하지 못하는 점과 기압 고도계가 변화하는 대기압의 특성상 절대 고도 정보를 제공하지 못한다는 문제점을 인식하고, 이를 개선하기 위해 새로운 기법을 제안하였다. 제안된 기법을 검증하기 위해 RTK를 활용한 기준국을 지정하고 시중에 판매하는 압력 센서 및 EVK 단말기를 활용하였으며, 실내 외에서의 사람의 이동으로 인한 고도 변화 실험과 차량을 이용한 이동 실험을 통해 검증하였다. 이 논문의 결과는 기준국을 이용하는 기존의 2D 측위 시스템을 간단히 3D 측위 시스템으로 확장할 수 있는 저가 솔루션을 제공할 수 있음을 보였다.

• Annals of Clinical Neurophysiology
• /
• 제21권2호
• /
• pp.87-93
• /
• 2019

Background: The standardized autonomic function test has become widely available. However, there are no reference data for this test for the Korean population. This study explored reference data for sudomotor and cardiovagal function tests for the Korean population. Methods: The sweat volume by quantitative sudomotor axon reflex test, heart-rate response to deep breathing (HRdb), expiration:inspiration (E:I) ratio, and Valsalva ratio (VR) were measured in 297 healthy Korean volunteers aged from 20 to 69 years. Multivariate regression analysis was performed to evaluate the effects of age, sex, and body mass index on these variables. The 2.5th, 5th, 10th, 90th, 95th, and 97.5th percentile values were obtained for each investigation. Results: The sweat volume was higher in males than in females. The HRdb and E:I ratio were negatively correlated with age, and were higher in males than in females. The VR was negatively correlated with age, but it was not correlated with sex. Conclusions: This study has provided data on the reference ranges for sudomotor and cardiovagal function tests in healthy Korean adults.