• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.113-119
• /
• 2004

A steel plated is typically composed of plate panels. The overall failure of the structure is certainly affected and can be governed by the bulking and plastic collapse of these individual members In the ultimate limit state design. therefore. a primary task is to accurately calculate the budding and plastic collapse strength of such structural members. Structural elements making up steel palated structures do not work separately. resulting in high degree of redundancy and complexity in contrast to those of steel framed structures. To enable the behavior of such structures to be analyzed, simplifications or idealizations must essentially be made considering the accuracy need and degree of complexity of the analysis to be used Generally the more complex the analysis the greater is the accuracy that may be obtained. The aim of this study is the investigation of the effect of the tripping behaviour including section characteristic for a plate under uniaxial compression.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1096-1108
• /
• 1996

In this paper, we propose a temporal adaptive tranform 3D SBC coder with motion compensation, exploiting redundancy in the temporal domain. We propose a temporal adaptivity measure, by which the R-D optimal temporal transform can be chaosen. The base temporal subband frame is coded using H.261-like MC-DCT coder, while the higher temporal subband frames are coded using the 2D adaptive wavelet packet bases, considering the various energy distribution which results from the temporal variation. In encoding the subbands, we employ adaptive scanning methods, uniform step-size quantization with VLC, and coded/not-coded flag reduction technique using the quadtree structure. From the simulation results, the proposed adaptive 3D subband coder shows about 0.29~3.14 dB gain over the H.261 and the fixed 3D subband coder techniques.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.197-201
• /
• 1988

A reliable Analytical Redundancy(AR) based Fault Detection Scheme(FDS) that can detect, discriminate sensor fault and process fault is presented. And a Fault Tolerant Control System ( FTCS ) with the FDS that performs original control objective without considerable loss of control performance in the face of sensor/process faults is constructed. These propositions are valuable in the sense that it resolves the well known sensitivity problem and that sensor/process faults can be detected, discriminated so that effects of any fault can be promptly accomodated by reconfiguring control system structure automatically.

• ETRI Journal
• /
• v.22 no.1
• /
• pp.1-11
• /
• 2000

The Satellite Operation System (SOS) has been developed for a low earth orbiting remote sensing satellite, Korea Multipurpose Satellite-I, to monitor and control the spacecraft as well as to perform the mission operation. SOS was designed to operate on UNIX in the HP workstations. In the design of SOS, flexibility, reliability, expandability and interoperability were the main objectives. In order to achieve these objectives, a CASE tool, a database management system, consultative committee for space data systems recommendation, and a real-time distributed processing middle-ware have been integrated into the system. A database driven structure was adopted as the baseline architecture for a generic machine-independent, mission specific database. Also a logical address based inter-process communication scheme was introduced for a distributed allocation of the network resources. Specifically, a hotstandby redundancy scheme was highlighted in the design seeking for higher system reliability and uninterrupted service required in a real-time fashion during the satellite passes. Through various tests, SOS had been verified its functional, performance, and inter-face requirements. Design, implementation, and testing of the SOS for KOMPSAT-I is presented in this paper.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.181-188
• /
• 2001

An XML is an markup language which has been focused on the next generation Web programming language. It easily represents the complex structure of a document, and it is possible to provide the access control over each component of an XML document. An implicit authorization technique means that granting an authorization to a node has effect on granting the same implicit authorization to its all descendants. Therefore, it enhances the time for the authorization grant and reduces the memory required for the authorization information. An authorization technique using an intention type and a authorization replacement solves a redundancy problem and decides whether the access is possible or the authorization conflict occurs at the first attempt.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.97-100
• /
• 2003

The quasi-complementary turbo codes (QCTC) proposed by Kim [1] is used for a fast hybrid ARQ scheme with incremental redundancy and adaptive modulation coding in the cdma2000 1xEV-DV [2]. The QCTC provides various code rates with good performance, a very simple encoder structure, and an inherent channel interleaving. It is shown that the QCTC is a unified scheme of channel coding and channel interleaving. In this paper, we introduce the properties of QCTC and various hybrid ARQ-QCTC schemes for the system.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.10a
• /
• pp.193-200
• /
• 1997

Current seismic design code is based of the assumption that the designed structures would be behaved inelastically during a severe earthquake ground motion. For this reason, seismic design forces calculated by seismic codes are much lower than the forces generated by design earthquakes which makes structures responding elastically. Present procedures for calculating seismic design forces are based on the use of elastic spectra reduced by a strength reduction factors known as "response modificaion factor". Because these factors were determined empirically, it is difficult to know how much inelastic behaviors of the structures exhibit. In this study, base shear forces required to maintain target ductility ratio were first calculated from nonlinear dynamic analysis on the single degree of freedom system. And then, base shear foeces specified in seismic design code compare with above results. If the strength(base shear) required strength should be filled by overstrength and/or redundancy. Therefore, overstrength of moment resisting frame structure will be estimated from the results of static nonlinear analysis(push-over analysis).analysis).

• International Journal of Reliability and Applications
• /
• v.3 no.3
• /
• pp.147-154
• /
• 2002

In this paper, we consider the warm standby redundant system(WSRS) which is consisted of an active unit, a standby unit and a switchover device. In addition, the switchover processing is controlled by a control module. The effect of failure of the control module is taken into account to develop our reliability model for the redundant structure. For the performance evaluation of a redundant system with the function of switchover processing which is assumed to cause the increase of the failure rate of the system, some reliability indices, such as availability, average availability, reliability and steady state availability, are considered.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.181-192
• /
• 1995

In this study, we introduce new types of planar 2 degree-of-freedom robot modules resembling the musculoskeletal structure of the human arm with actuation redundancy. First, for the given actuator sizes the performance analysis for the manipulator with redundant actuation and without redundant actuation is performed with respect to maximum load handling capacity, maximum hand velocity, and maximum hand acceleration. Secondly an algorithm which decides optimal actuator sizes for the given operational performances is introduced, and the optimal actuator sizes for a robot module with four redundant actuation are obtained. The algorithms employed in this paper will be useful to analyze the robot performances and to determine the actuator sizes for general robot manipulators.

• Journal of Oral Medicine and Pain
• /
• v.23 no.3
• /
• pp.241-247
• /
• 1998

Salivary research is at a critical crossroads regarding the clinical application of the basic knowledge. The purpose of this article is to introduce the current progress on salivary research to Korean dental scientists. The accumulated results based on advance technologies such as protein chemistry, molecular biology, and structural biology have showed that salivary macromolecules need structural requirements for proper function. Currently, several concepts or principles, which can be applied to salivary macromolecules, have been suggested. These include the role of molecules' conformation on biological activity, their multifunctional nature, their redundancy of function, their amphifunctional properties, and the potential importance of complexing between molecules. These concepts and the information available will help the development of saliva substitutes, the design of drug carriers and chimera molecules with enhanced function and the development of gene therapy protocols. These approaches will alleviate or restore lost salivary function and can be used to treat various kinds of oral and systemic diseases.