• Journal of Food Hygiene and Safety
• /
• v.32 no.6
• /
• pp.485-492
• /
• 2017

This study investigated to determine the microbial contamination levels of strawberries at harvest and distribution stages and to suggest a control measure for reducing the microbial contamination of strawberries by replacing worker's gloves used at harvest and distribution stages. According to the monitoring results, the contamination levels of total aerobic bacteria (TAB) were in the order of soil ($7.12{\pm}0.61{\log}_{10}CFU/g$), gloves ($6.06{\pm}1.80{\log}_{10}CFU/cm^2$), strawberry ($3.28{\times}0.98{\log}_{10}CFU/g$), and water ($3.08{\pm}0.55{\log}_{10}CFU/g$) at harvest stage. TAB of strawberry at was harvest stage reduced from $3.28{\pm}0.98{\log}_{10}CFU/g$ to $1.85{\pm}0.21{\log}_{10}CFU/g$ and $2.6{\pm}0.30{\log}_{10}CFU/g$ at cold and room temperature storage, respectively. By the replacement of worker's gloves and distribution temperature, TAB levels of the strawberries were significantly reduced when compared to those of the strawberries treated without replacement of worker's gloves and distributed at room temperature. For reusing the replaced gloves, washing with a commercial disinfectant, clorox, was effective to reduce microorganisms contaminated on the worker's gloves. These results demonstrated that appropriate replacement of gloves at the harvest and distribution stages is an effective method for reducing microbial contamination of fresh strawberries.

• Food Science of Animal Resources
• /
• v.29 no.6
• /
• pp.709-718
• /
• 2009

The purpose of this study was to search for physical treatments to reduce allergenicity of pork. Physical treatments such as heating, autoclave, microwave, sonication, and irradiation have been used for food processing or reduction of allergenicity. The porcine serum albumin (PSA), known as a major allergen in pork, was extracted after physical treatments. The antigenicity of pork extracts by heating (80 and $100^{\circ}C$ for 20 min), autoclave ($121^{\circ}C$ for 5, 10, and 30 min), and microwave (for 5 and 10 min) was significantly decreased. Especially, the binding ability of p-IgG to pork extracts by autoclave for 30 min showed the greatest decrease (about 3%) in physical treatments. However, the antigenicity of pork was unaffected by sonication and irradiation treatment. These results indicated that the autoclave treatment was the most effective method to reduce the antigenicity of pork.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.962-973
• /
• 2017

Concerns about an air pollution are gradually increasing at home and abroad. The automotive and fuel researchers are trying to reduce emissions and greenhouse gases of vehicles through a research on new engine designs and innovative after-treatment systems using clean fuels (eco-alternative fuel) and fuel quality improvements. In this paper, we stduy the emission characteristics of greenhouse gases on seven vehicles using gasoline, diesel, and LPG by legal test mode in domestic and abroad.(Urban mode, Highway mode, rapidly acceleration and deceleration, using air conditioner, low temperature condition) Regardless of fuels, most of the greenhouse gases tend to show the worst results in cold FTP-75 mode. In the case of A vehicles (2.0 MPI) and B vehicles (2.4 GDI) using a gasoline fuel, the factors that increase greenhouse gases are in order of a rapidly acceleration and deceleration, using air conditioner, low temperature condition. But G vehicles(LPLi) have different emission characteristics from another vehicles. In the case of A vehicles (2.0 w/o DPF) and B vehicles (2.2 with DPF) using a diesel fuel, the factors that increase greenhouse gases are in order of a rapidly acceleration and deceleration, using air conditioner, low temperature condition. However, the factor of F vehicles are in order of low temperature condition, using air conditioner, rapidly acceleration and deceleration. In conclusion, it will be an effective method to apply different technologies of emission reduction for each fuel.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.261-272
• /
• 1992

Tetradentate Schiff base Cobalt(II)(3MeOSED)$(H_2O)_2$ complexe was synthesized and allowed to react with dry oxygen to form oxygen adducts of Cobalt(III) complexes such as ${\mu}$-peroxo type [Co(III)(3MeOSED)(DMF)]$_2O_2$ and [Co(III)(3MeOSED)(DMSO)]$_2O_2$in DMF and DMSO or superoxo type [Co(III)(3MeOSED)(Py)]$O_2$ in pyridine. The oxygen adducted complex was investigated by cyclic voltammetry and DPP method with glassy carbon electrode in 0.1M TEAP-DMF (-DMSO,-Py) as supporting electrolyte solution. As a result the reduction reaction process occurred to four steps including prewave Of $O_2^-$in 1 : 1 oxygen adducted superoxo type [Co(III)(3MeOSED)(Py)]$O_2$complex and three steps not including prewave of $O_2^-$ in 1 : 2 oxygen adducted ${\mu}$-peroxo type [Co(III)-(3MeOSED)(DMF)]$_2O_2$ and [Co(III)(3MeOSED)(DMSO)]$_2O_2$. A superoxo type [Co(III)(3MeOSED)(L)]$O_2\;(L: CH_3OH)$ was generated with oxygen in methanol. Selectively oxidized hydrazobenzene $(H_2AB)$ to trans-azobenzene(t-AB) and the rate constant k for oxidation reaction of the following equation is $(2.96 {\pm} 0.2)$${\times}$ $10^{-1}$M/sec. $H_2AB$ + Co (II)(3MeOSED)$(L_2)+O_2\;{\rightleftarrow^K}$ [Co(III)(3MeOSED)(L)]$O_2{\cdot}H_2AB{\longrightarrow^K}$ Co(II(3MeOSED)$(L)_2$+t-AB+$H_2O_2 $.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.667-673
• /
• 2011

There is relatively high vulnerability of soil erosion in slope highland agriculture due to a reclamation of mountain as well as low surface covering in early summer season with high rainfall intensity time. The aim of this study was to evaluate various surface covering methods for reducing soil loss in highland radish cultivation in highland. The experiment was conducted in 17% sloped lysimeter ($2.5m{\times}13.4m$) with 8 treatments including covering with cut rye, sod culture of rye, Ligularia fischeri var. spiciformis Nakai, Arachniodes aristata Tindale, Aster koraiensis Nakai, Festuca myuros L. and mulching with black polyethylene film, and runoff water, eroded soil and radish growth were investigated. Surface covering with sod culture and plant residue, especially cut rye treatment, had lower runoff water than non-covering, whereas black polyethylene film mulching had the reverse. The amount of eroded soil was also lowest in cut rye treatment, $0.3Mg\;ha^{-1}$, and increased in the order of rye sod culture, Ligularia fischeri var. spiciformis Nakai, Aster koraiensis Nakai, Festuca myuros L., Arachniodes aristata Tindale, black polyethylene film, and non-covering, $68.2Mg\;ha^{-1}$. The results showed that surface covering with sod culture or plant residue could be effective for reducing runoff water and soil erosion in the radish field, significantly in cut rye treatment. On the other hand, in sod culture of rye, Aster koraiensis Nakai and Ligularia fischeri var. spiciformis Nakai, radish yields were lower than in the non-covering. Unlike this, covering with cut rye, sod culture of Festuca myuros L. had similar radish yield to the non-covering radish yield. In conclusion, covering with cut rye and sod culture of Festuca myuros L. were beneficial for reduction of soil loss without decreasing in radish yield in highland sloped fields.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1071-1079
• /
• 2011

In this study, coal combustion ash (CCA) was evaluated for its stabilization effect on acidic mine waste with column experiment. Total of six treatments were installed depending on mixing ratio between coal wastes and CCA (0, 20, 40%) and mixing method (completely mixing and layered). Artificial acidic rain (pH 5.6) was used for feeding solution with flow rate of $0.05mL\;min^{-1}$. Result showed that higher pH of leachate was observed as more CCA was mixed. The highest pH in leachate was measured when 40% of CCA was mixed with coal waste (pH of 5.8). Also, complete mixing with CCA and coal waste was more effective to increase the pH of leachate than layered treatment. Regarding the reduction of soluble Fe amount, the highest efficiency (78%) was observed when 20% of coal ash was completely mixed with mine waste. Based on those result, optimum mixing ratio of coal ash with mine waste can be ranged 20-40% depending on environmental circumstances in the field.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.210-215
• /
• 2021

For sterilization of microorganisms of the Listeria genus contaminating enoki mushroom, pilot mushroom grower equipped with air sterilization devices were developed. Sterilization experiments were performed using physical and chemical treatments. Internal temperature and humidity were controlled, maintaining 6.62℃±0.30 in the upper shelves, 6.46℃±0.24 in the middle shelves, and 6.48℃±0.25 in the lower shelves. Humidities were 79.97%±4.42, 79.43%±4.06, and 79.94±4.30%, respectively, with a temperature setting of 6.5℃, and a relative humidity of 75%. A suitable enoki mushroom cultivation stage for air sterilizer application was during the growth stage, with temperature in the 6.5~8.5℃ range, and humidity of 70~80%. At these same internal conditions, the ozone concentration in the mushroom cultivator was found to be 160 ppb during ion-cluster generator operation. After physical sterilization, the Listeria innocua survival rate was 0.1 to 0.9% using ion cluster sterilization, and 9.3 to 10.6% using UV air sterilization. The Listeria innocua survival rates on different materials were 9.3~10.6% on the metal specimen, and 9.9~16.2% on the plastic wrapper. The survival rate was particularly high on the rough side of the plastic wrapper. Ion cluster air sterilization is a labor-saving and effective method for suppressing the occurrence of Listeria bacteria on mushroom growers walls and shelves. For the plastic wrapper, chemical sterilization is more effective than physical sterilization.

• Journal of Internet Computing and Services
• /
• v.22 no.2
• /
• pp.109-121
• /
• 2021

As the global COVID-19 pandemic is prolonged, the Corona Blue phenomenon, combined with COVID-19 and blue, is intensifying. The purpose of this study is to analyze the current trend of Corona Blue in consideration of the possibility of increasing mental illness and the need for countermeasures, especially after COVID-19. This study tried to find out the relationship between stress and leisure activities before and after COVID-19 by using Corona Blue news article analysis through the topic modeling method, and questionnaire find out the help of stress and leisure activities. This study was compared and analyzed using two research methods. First, a total of 363 news articles were analyzed through topic modeling based on newspaper articles from January 2020, when COVID- 19 was upgraded to the "border" stage, until September, where the social distancing stage was strengthened to stage 2.5 in Korea. As a result of the study, a total of 28 topics were extracted, and similar topics were grouped into 7 groups: mental-demic, generational spread, causes of depression acceleration, increased fatigue, attitude to coping with long-term wars, changes in consumption, and efforts to overcome depression. Second, the SPSS statistical program was used to analyze the level of stress change according to leisure activities before/after COVID-19 and the main help according to leisure activities. As a result of the study, it was confirmed that the average difference in stress reduction according to participation in leisure activities before COVID-19 was larger than after COVID-19. Also, leisure activities were found to be effective in stress relief even after COVID-19. In addition, if the main help from leisure activities before COVID-19 was the meaning of relaxation and recharging through physical and social activities. After COVID-19, psychological roles such as mood swings through nature, outdoor activities, or intellectual activities were found to play a large part. As such, in this study, it was confirmed that understanding the current status of Corona Blue and coping with leisure in extreme stress situations has a positive effect. It is expected that this research can serve as a basis for preparing realistic and desirable leisure policies and countermeasures to overcome Corona Blue.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.224-243
• /
• 2014

This study examined the materials and casting technology(cast, alloy, etc.) used in the manufacturing of bronze artifacts based on old literature such as Yongjae Chonghwa, Cheongong Geamul, and The Korea Review. In the casting experiment for restoration of Sangpyong Tongbo, a bronze and brass mother coin mold was made using the sand mold casting method described in The Korea Review. The cast was comprised of the original mold plate frame, wooden frame, and molding sand. Depending on the material of the outer frame, which contains the molding sand, the original mold plate frame can be either a wooden frame or steel frame. For the molding sand, light yellow-colored sand of the Jeonbuk Iri region was used. Next, the composition of the mother alloy used in the restoration of Sangpyong Tongbo was studied. In consideration of the evaporation of tin and lead during actual restoration, the composition of Cu 60%, Zn 30%, and Pb 10% for brass as stated in The Korea Review was modified to Cu 60%, Zn 35%, and Pb 15%. For bronze, based on the composition of Cu 80%, Sn 6%, and Pb 14% used for Haedong Tongbo, the composition was set as Cu 80%, Sn 11%, and Pb 19%. The mother coin mold was restored by first creating a wooden father coin, making a cast from the wooden frame and basic steel frame, alloying, casting, and making a mother coin. Component analysis was conducted on the mother alloy of the restored Sangpyong Tongbo, and its primary and secondary casts. The bronze mother alloy saw a 5% increase in copper and 4% reduction in lead. The brass parent alloy had a 5% increase in copper, but a 4% and 12% decrease in lead and tin respectively. Analysis of the primary and secondary mother coin molds using an energy dispersive spectrometer showed that the bronze mother coin mold had a reduced amount of lead, while the brass mother coin mold had less tin. This can be explained by the evaporation of lead and tin in the melting of the primary mother coin mold. In addition, the ${\alpha}$-phase and lead particles were found in the mother alloy of bronze and brass, as well as the microstructure of the primary and secondary coin molds. Impurities such as Al and Si were observed only in the brass mother coin mold.

• Korean Journal of Remote Sensing
• /
• v.35 no.2
• /
• pp.289-298
• /
• 2019

In this present study, the effects of Signal to Noise Ratio (SNR), Full Width Half Maximum (FWHM), Aerosol Optical Depth (AOD), $O_3$ Vertical Column Density ($O_3$ VCD), and Solar Zenith Angle (SZA) on the accuracy of sulfur dioxide Vertical Column Density ($SO_2$ VCD) retrieval have been quantified using the Differential Optical Absorption Spectroscopy (DOAS) method with the ground-based direct-sun synthetic radiances. The synthetic radiances produced based on the Beer-Lambert-Bouguer law without consideration of the diffuse effect. In the SNR condition of 650 (1300) with FWHM = 0.6 nm, AOD = 0.2, $O_3$ VCD = 300 DU, and $SZA=30^{\circ}$, the Absolute Percentage Difference (APD) between the true $SO_2$ VCD values and those retrieved ranges from 80% (28%) to 16% (5%) for the $SO_2$ VCD of $8.1{\times}10^{15}$ and $2.7{\times}10^{16}molecules\;cm^{-2}$, respectively. For an FWHM of 0.2 nm (1.0 nm) with the $SO_2$ VCD values equal to or greater than $2.7{\times}10^{16}molecules\;cm^{-2}$, the APD ranges from 6.4% (29%) to 6.2% (10%). Additionally, when FWHM, SZA, AOD, and $O_3$ VCD values increase, APDs tend to be large. On the other hand, SNR values increase, APDs are found to decrease. Eventually, it is revealed that the effects of FWHM and SZA on $SO_2$ VCD retrieval accuracy are larger than those of $O_3$ VCD and AOD. The SZA effects on the reduction of $SO_2$ VCD retrieval accuracy is found to be dominant over the that of FWHM for the condition of $SO_2$ VCD larger than $2.7{\times}10^{16}molecules\;cm^{-2}$.