• Agricultural and Biosystems Engineering
• /
• v.7 no.1
• /
• pp.13-17
• /
• 2006

The planocentric gear, known as wobble mechanism, has been used for speed reducing mechanism as an ingenious mechanism. The modem application can be found in the backrest adjusting mechanism of a vehicle reclinable seat, fluid pumps and aircraft hoist and winches. Higher speed reduction ratios, high load capacity, lower weight, and compactness are the main advantages of this gear. This paper presents velocity and static force analysis to investigate the friction lock of the planocentric gear. The rectilinear tooth profile is used to maximize the speed reduction ratio. The equivalent linkage system is used for the analysis of instantaneous motion. As the results, the transmission efficiency of the planocentric gear is found and the friction lock of the system is determined for the friction coefficients of journals. A numerical example that illustrates the developed analysis is presented.

• Journal of Environmental Health Sciences
• /
• v.22 no.3
• /
• pp.8-16
• /
• 1996

Effects of water extract of aloe vera on lead-induced neurotoxicity were investigated in sciatic nerve isolated from rat. The mechanism on toxicity reduction by measuring activities of axonal enzymes, metabolism of myo-inositol in nerve, lead concentration in several organs and so on were further examimed. In the lead-treated rats, the transport rate of axonal enzyme, such as acetyl cholinesterase and choline acetyltransferase, was reduced by from 50% to 30% respectively. Reduction in myo-inositol concentration and $Na^+/K^+$ ATPase activity were also observed in sciatic nerve from lead-treated rat. However, the aloe extract administration significantly eliminated the impairment and maintained myo-inositol concentration to about 85% of normal level. Also aloe extract promoted the excretion rate of lead which is accumulated in blood, sciatic nerve and kidney. These results suggest that lead-induced neurotoxicity was significantly reduced by administration of aloe extract and the mechanism might be partly increase in kidney excretion rate of lead and parity normalization of $Na^+/K^+$ ATPase activity which is critical factor in order to keep nerve maintaining normal myo-inositol level.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1249-1256
• /
• 1998

${\beta}$-Silicon carbide(${\beta}$-SiC) whiskers could be synthesized by the carbothermal reduction of kaolin at tem-peratures between 1400 and 1500$^{\circ}C$. The whiskers were grown up to about 1150 of aspect ratio by VS mechanism (showing tapering tips) and to about 45 of that by VLS mechanism (showing round droplet tips) respectively. Hydrocarbon like methane in the reaction atmosphere promoted the formation of gaseous il-icon monoxide(SiO) from silicon dioxide(SiO2) and subsequently reacted with it to form whiskers. The for-mation of ${\beta}$-SiC whiskers increased with increasing carbon content(to 30 wt%) and reaction temperatures. The max. yield of ${\beta}$-SiC whiskers was 15% at 1500$^{\circ}C$ under 20%CH4/80%H2.

• Environmental Analysis Health and Toxicology
• /
• v.18 no.3
• /
• pp.165-174
• /
• 2003

Cr (Ⅵ) - containing compounds are well-established carcinogens, although the mechanism for chromium - induced carcinogenesis is still not well understood. The reduction of Cr (Ⅵ) to its lower oxidation states, par ticularly Cr (V) and Cr (IV), is an important step for the production of chromium-mediated reactive oxygen species (ROS). The persistent oxidative stress during the reduction process may play a key role in the mechanism of Cr (Ⅵ) -induced carcinogenesis. This paper summarizes recent studies on (1) the reduction of Cr (Ⅵ) to Cr (III) occur by a multiplicity of mechanisms depending on the nature of reducing agents including ascorbate, diol-and thiol-containing molecules, certain flavoenzymes, cell organelles, intact cells, and whole animals; (2) free-radical production with emphasis on hydroxy radical generation via Fenton or Haber-Weiss type reactions; and (3) free radical - induced cellular damage, such at DNA strand breaks, hydroxylation of 2'-deoxyguanosine, and activation of nuclear transcription factor kB.

• Journal of the Korean Society of Visualization
• /
• v.9 no.1
• /
• pp.20-28
• /
• 2011

An experimental assessment has been made of the drag reducing efficiency of the outer-layer vertical blades, which were first devised by Hutchins. The drag reduction efficiency of the blades was reported to reach as much as 30%. However, the drag reduction efficiency was quantified only in terms of the reduction in the local skin-friction coefficient. In the present study, a series of drag force measurements in towing tank has been performed toward the assessments of the total drag reduction efficiency of the outer-layer vertical blades. A maximum 9.6% of reduction of total drag was achieved. The scale of blade geometry is found to be weakly correlated with outer variable of boundary layer. In addition, detailed flow field measurements have been performed using 2-D time resolved PIV with a view to enabling the identification of drag reduction mechanism.

• Journal of Powder Materials
• /
• v.10 no.6
• /
• pp.422-429
• /
• 2003

The reduction mechanism of the composite powders mixed with $WO_3$ and CuO has been studied by using thermogravimetry (TG), X-ray diffraction, and microstructure analyses. The composite powders were made by simple Turbula mixing, spray drying, and ball-milling in a stainless steel jar with the ball to powder ratio of 32 to 1 at 80 rpm for 1 h without process controlling agents. It is observed that all the oxide composite powders are converted to W-coated Cu composite powder after reducing treatment under hydrogen atmosphere. For the formation mechanism of W-coated Cu composite powder, the sequential reduction steps are proposed as follows: CuO contained in the ball-milled composite powder is initially reduced to Cu at the temperature range from 20$0^{\circ}C$ to 30$0^{\circ}C$. Then, $WO_3$ powder is reduced to W $O_2$ via W $O_{2.9}$ and W $O_{2.72}$ at higher temperature region. Finally, the gaseous phase of $WO_3(OH)_2$ formed by reaction of $WO_2$ with water vapour migrates to previously reduced Cu and deposits on it as W reduced by hydrogen. The proposed mechanism has been proved through the model experiment which was performed by using Cu plate and $WO_3$ powder.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.161-164
• /
• 2015

A short kinetic mechanism for premixed benzene/air flames was developed with a reduction method of Simulation Error Minimization Connectivity Method(SEM-CM). It consisted of 38 species and 336 elementary reactions. Flame speeds were calculated and compared with those from full mechanisms and experiments of other researcher. Those comparisons are in good agreement between the full mechanism and the short mechanism at high pressure condition. In numerical work the running time with the short mechanism was over 10 times faster than one with the full mechanism.

• Journal of Powder Materials
• /
• v.24 no.2
• /
• pp.141-146
• /
• 2017

$Bi_2Te_3$ powders are recovered by wet chemical reduction for waste n-type thermoelectric chips, and the recovered particles with different morphologies are prepared using various surfactants such as cetyltrimethylammonium bromide (CTAB), sodium dodecylbenzenesulfonate (SDBS), and ethylenediaminetetraacetic acid (EDTA). When citric acid is added as the surfactant, the shape of the aggregated particles shows no distinctive features. On the other hand, rod-shaped particles are formed in the sample with CTAB, and sheet-like particles are synthesized with the addition of SDBS. Further, particles with a tripod shape are observed when EDTA is added as the surfactant. The growth mechanism of the particle shapes depending on the surfactant is investigated, with a focus on the nucleation and growth phenomena. These results help to elucidate the intrinsic formation mechanism of the rod, plate, and tripod structures of the $Bi_2Te_3$ recovered by the wet reduction process.

• Korean Journal of Materials Research
• /
• v.16 no.5
• /
• pp.323-328
• /
• 2006

In situ electrical conductivity measurements on $V_2O_5WO_3/TiO_2$ catalysts were carried out at between 100 and $300^{\circ}C$ under pure oxygen, NO and $NH_3$ to investigate the reaction mechanism for ammonia SCR (selective catalytic reduction) de NOX. The electrical conductivity of catalysts changed irregularly with supply of NO. It was, however, found that the electrical conductivity change with ammonia supply was regular and the increase of electrical conductivity was mainly caused by reduction of the labile surface oxygen. The electrical conductivity change of catalysts showed close relationship with the conversion rate of NOx. Variation of conversion rate in atmosphere without gaseous oxygen also showed that labile lattice oxygen is indispensable in the initial stage of the de NOx reaction. These results suggest that liable lattice oxygen acts decisive role in the de NOx mechanism. They also support that de NOx reaction occurs through the Eley?Rideal type mechanism. The amount of labile oxygen can be estimated from the measurement of electrical conductivity change for catalysts with ammonia supply. This suggests that measurement of the change can be used as a measure of the de NOx performance.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.116-116
• /
• 2003

Most of all nano-structures, SiC had a high electrical conductivity and mechanical strengths ay high temperatures. So It was considered a useful materials for nanosized device materials and added materials for strength hardening. Much methods were developed for SiC nanowire and nanorods like CVD, carbothermal reduction, Laser ablation and CNT-confined reduction. These methods used the VLS (Vapor-Liquid-Solid) growth mechanism. In these experiments, SiC nanowire was grown by SLS (Sold-Liquid-Solid) growth mechanism used Graphite substrate, And we characterized its microstructure to compare with VLS growth mechanism.