• Journal of the Korean Institute of Navigation
• /
• v.8 no.2
• /
• pp.1-13
• /
• 1984

This paper concerns computerization of the altitude correction in the sight reduction process. To obtain observed altitude, the factors such as refraction, parallx, semidiameter, phase etc, are corrected to sextant altitude. The factors are the arguments into the nautical almanac table from which are extracted values to add to or substract from the raw sight to obtain corrected value. If the altitude correction is to be done by sophisticated calculator, each factors must be formulated. The author studies the formulation of above factors, and simply from the date and ephemeris time of the sighting calculate the values of the factors. The calculated values are compared with that from nautical almanac, and it is confirmed that the formulae are practically used.

• Journal of Environmental Science International
• /
• v.24 no.5
• /
• pp.647-655
• /
• 2015

In this study, to targeting Songpa of Seoul, were analyzed the effect on the noise mitigation in roadside buffer green spaces. Noise of Songpa Street buffer green space was determined to be higher during the day than at night. In addition, it was most of 60 db or more. However, the noise reduction function of the buffer green was not greatly affected by time. In the case of noise reduction rate, during the day time it was the order of the mounding type (18.14%)> plain type (5.73%)> slope type (4.08%), And, in the case of night time, it was the order of the mounding type (11.29%)> slope type (10.22%)> plain type (4.42%). Noise reduction rate, all of the daytime, was the highest in the mounding type. As a result of the factors on the amount of reduction of noise, More physical structure is mounding type, green structure is the stratification of green space, and the number of individuals is large, the higher the tree planting density, it is determined that the noise reduction effect is high. Also, factors affecting the noise reduction effect of the day and night were different.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.3
• /
• pp.821-832
• /
• 2015

The aims of this study are to estimate the optimal vessel reduction scales and these direct economic effects of coastal and offshore fisheries in the Republic of Korea. To estimate respectively optimal fishing efforts of individual fishery by species in coastal and offshore fisheries, we adopted appropriate fishing power of each species published by National Fisheries Research and Development Institute and also considered biological and socio-economic factors such as the bycatch rate, the profit rate, the efficiency of resource use, the average age of fishing vessel, the intention of vessel reduction, and the annual changes in vessels by other factors. The direct economic effects of the optimal vessel reduction in coastal and offshore fisheries based on maximum sustainable yield and 2/3 maximum sustainable yield was calculated by a cost-benefit analysis. This study showed that optimal reduction numbers of vessels engaged in coastal and offshore fisheries were 4,431 and 374 vessels and the direct economic effects in coastal and offshore fisheries were about 371.7 and 569.4 billion won and these NPV and BCR were 111.7 billion won and 1.65 and 342.6 billion won and 4.97 respectively.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.473-486
• /
• 2016

Purpose: Although the price reduction policy is established for military supplies, it is more focused on general military items. Therefore, it is hard to apply the current price reduction policy directly to the major weapon system. The purpose of this study is to develop an evaluation model which generates appropriate outputs for price reduction of military supplies. Methods: To improve the current policy, we first analyze the relevant policies of price reduction of similar organizations. We gather the opinions of related organization through survey including DAPA, Logistics Command, DTaQ and Defense industry companies. Then, we develop a price reduction model based on the analytic hierarchical process(AHP) method to find out important factors for price reduction. Results: The results of AHP analysis show that the important factors when applying price reduction of military supplies. From the analysis, the proposed method effectively generates the amounts of price reduction for the nonconformance items. Conclusion: The results of this research will be used as guidelines to improve military supplies policy of price reduction.

• Wind and Structures
• /
• v.30 no.3
• /
• pp.219-229
• /
• 2020

Net pressures on roofs and walls of buildings are dependent on the internal and external pressure fluctuations. The variation of internal and external pressures are influenced by the size and location of the openings. The correlation of external and internal pressure influences the net pressures acting on cladding on different parts of the roof and walls. The peak internal and peak external pressures do not occur simultaneously, therefore, a reduction can be applied to the peak internal and external pressures to obtain a peak net pressure for cladding design. A 1:200 scale wind tunnel model study was conducted to determine the correlations of external and internal pressures and effective reduction to net pressures (i.e., net pressure factors, F_C) for roof and wall cladding. The results show that external and internal pressures on the windward roof and wall edges are well correlated. The largest ${\mathcal{C}}_{{\check{p},net}$, highest correlation coefficient and the highest F_C are obtained for different wind directions within 90° ≤ θ ≤ 135°, where the large openings are on the windward wall. The study also gives net pressure factors F_C for areas on the roof and wall cladding for nominally sealed buildings and the buildings with a large windward wall opening. These factors indicate that a 5% to 10% reduction to the action combination factor, K_C specified in AS/NZS 1170.2(2011) is possible for some critical design scenarios.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.2
• /
• pp.97-106
• /
• 2001

The purpose of this paper is to determine the expected percentage of the 'VTS addressable' casualties that could be prevented with the installation of fourth level(Automatic Dependent Surveillance) of coastal VTS. In this study, it determines the VTS benefit by multiplying casualty rate reduction factors by the effect level of causal factors. The development of casualty rate reduction factors was based on the questionnaire survey, and the evaluation of effect levels was based on the causal analysis using functional block diagram. The results of this paper are compared With the results of worldwide literature related to the VTS effectiveness. One or more of the key variable inputs of this study, casualty rate reduction factors, may be somewhat uncertain and therefore subject to sensitivity analysis.

• The Journal of Korean Medicine
• /
• v.19 no.2
• /
• pp.391-400
• /
• 1998

This study was to investigate the effects of Bo-Jung-Chi-Seub-Tang administration on body composition, blood biochemistrical factors and hormonal changes during 2 weeks Weight Reduction in TaeKwonDo Athletes. 10 subjects were belong to be in elite athletes of KNUPE. They were divided two groups(administration group and non-administration) by 5 subjects in each group randomly. they were measured about body composition(% Fat, Fat Wt, LBM, TBW), Blood Biochemistrical Factors(glucose, TG, total protein, albumin, BUN, Uric acid, Ca, Pi, Mg) and Hormonal Changes(Renin, Aldosteron). As the results of the experiment, conclusions were made as follows: In terms of % Fat, Fat W.T., Mg, TG, Renin, it was shown significant differences between two groups. Although there were no significant differences, rate of weight reduction and levels of LBM, BUN in Bo-Jung-Chi-Seub-Tang administration group were changed more lower than non-administration group.

• Korean Journal of Community Nutrition
• /
• v.9 no.6
• /
• pp.683-694
• /
• 2004

The objective of this study is to improve the health related quality of life through the efficient weight reduction by analyzing the ecological factors related to completion of weight reduction program in the obese premenopausal women aged 20-29 years. The factors influencing completion of obesity management programs in the obese women were the preferences of sweet and salt taste, health related quality of life (general health, role emotional), eating attitude scores, and regularity of mealtime scores. The finding that the completion of obese management programme were improved if the health-related quality of life was high and the physiological status related symptoms of stress, depress, and eating disorder were good has implications for the treatment of obesity. The questionnaire used this study can be available to develop the obesity assessment sheets which is required the exploration of the characteristics of obese women and the tailored multi-disciplinary obesity management program. Moreover, the obesity assessment sheets will make a contribution to determine types of the programs that is suitable for obesity women before starting an obesity management program.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.4
• /
• pp.49-60
• /
• 2010

The actual hysteretic behavior of structural elements and systems is smooth. Smooth hysteretic behavior is more representative of actual behavior than bi-linear or piece-wise linear stiffness degrading models. The strength reduction factor in seismic design is used to reduce the elastic strength demand to design levels. In this study, the effect of smoothness on the strength reduction factor is evaluated for several smooth hysteretic systems subjected to near-fault and far-fault earthquakes. For design purposes, a simple expression of the strength reduction factor considering hysteretic smoothness and earthquake characteristics, represented as near-fault and far-fault earthquakes, is proposed. The strength reduction factors calculated by the proposed simple formulation are more similar to the factors directly obtained from inelastic response spectrum analyses than those calculated by several existing formulas.

• Steel and Composite Structures
• /
• v.21 no.3
• /
• pp.629-659
• /
• 2016

In cold-formed stainless steel lipped channel-sections, web openings are becoming increasingly popular. Such openings, however, result in the sections becoming more susceptible to web crippling, especially under concentrated loads applied near the web opening. This paper presents the results of a finite element parametric study into the effect of circular web openings on the web crippling strength of cold-formed stainless steel lipped channel-sections for the interior-one-flange (IOF) loading condition. This involves a bearing load applied to the top flange of a length of member, away from the end supports. The cases of web openings located centred beneath the bearing load (i.e. beneath the bearing plate delivering the load) and offset to the bearing plate, are considered. Three grades of stainless steel are considered: duplex EN1.4462, austenitic EN1.4404 and ferretic EN1.4003. In total, 2218 finite element models were analyzed. From the results of the parametric study, strength reduction factors for load bearing capacity are determined, where these reduction factors are applied to the bearing capacity calculated for a web without openings, to take account the influence of the web openings. The strength reduction factors are first compared to equations recently proposed for cold-formed carbon steel lipped channel-sections. It is shown that for the case of the duplex grade, the strength reduction factor equations for cold-formed carbon steel are conservative but only by 2%. However, for the cases of the austentic and ferritic grades, the cold-formed carbon steel equations are around 9% conservative. New strength reduction factor equations are proposed for all three stainless steel grades.