• Journal of the Korean Data and Information Science Society
• /
• 제24권6호
• /
• pp.1127-1139
• /
• 2013

In the realization of obtained image by various visual equipments, the addition of noise to the original image is a common phenomenon and the occurrence of the noise is practically impossible to prevent completely. Thus, the noise detection and reduction is an important foundational purpose. In this study, we detect the orientation about feature of images and estimate the level of noise variance based on the measurement of the relative proportion of the noise. Also, we apply the estimated level of noise to the sigma filter on noise reduction algorithm. And using the orientation about feature of images by weighted value, we propose the effective algorithm to eliminate noise. As a result, the proposed statistical noise reduction methodology provides significantly improved results over the usual sigma filtering and regardless of the estimated level of the noise variance.

• Structural Engineering and Mechanics
• /
• 제50권4호
• /
• pp.525-539
• /
• 2014

Bonded composite-patch repair has been widely used to restore or extend the service life of damaged structures due to its effectiveness as a mechanical repair technique. In this paper using extended finite element method (XFEM), three-dimensional crack models are developed to examine the fracture behavior of centrally cracked aluminum plates repaired with single and double sided composite patches. Stress intensity factor (SIF) at the crack tip is used as the fracture criterion. In this regard, the effects of the crack lengths, patch materials, orientation of plies, adhesive and patch thickness are examined to estimate the SIF of the repaired plate and the repair performance. The obtained results show that composite patches have significant effect on reduction of the SIF at the crack tip. It is also proved that using double symmetric repair, in comparison to single one, reduces considerably SIF at the crack tip. Hence, the residual strength can be improved significantly as well as fatigue life of the structure. Investigation of ply orientation effects shows SIF increase as the ply orientation is changed from $0^{\circ}$ (perpendicular to the advancing crack) to $90^{\circ}$ (parallel to the crack line). However, the effectiveness of the ply orientation depends on the loading direction and the crack direction.

• Asia-Pacific Journal of Business
• /
• 제9권2호
• /
• pp.15-37
• /
• 2018

The purpose of this paper was to explain on the conceptualisation of the Halal Orientation strategy (HOS) based on operation strategy perspective. The four variables constitute in HOS are staffing, materials, production process and storage together with transportation. By focusing on HOS, the manufacturers reinforce improvement in quality, cost control, time and flexibility of the production Halal food industry in Malaysia which is the performance objective of market competitiveness in Malaysia context. A self-administered questionnaire was designed and used to assess the significant of HOS that lead to improve quality, cost control, reduction in time and the flexibility among Halal food manufacturers in Malaysia. From a total of 443 Halal food manufacturers were involved in this study, only 137 respondents are usable for this research. The study showed significant results for the manufacturers to focus in Halal Orientation strategy (HOS) which have positive impacts on quality, cost control, time and flexibility. This research aimed to measure the HOS among food firms in Malaysia and to determine HOS in relation with the performance objective of operational outcomes.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.129-131
• /
• 2010

This study is to measure 3d deformation of railroad-bridge of steel structure using the non-metric high-resolution digital camera. Measuring the deformation is to be utilized relative orientation using the coplanarity for reduction of the field survey and efficiency of the work. The results are compared with deformation by exterior orientation parameters, which are computed from 3d measurement of control points by the Total-station. Then accuracy of the utilized method will be verified.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제17권2호
• /
• pp.155-160
• /
• 2011

In these days, there are increasing demands for weight reduction in many industrial fields including marine industries. Therefore, magnesium thin films for lightweight materials were prepared on magnesium alloy substrate. The influence of gas pressure and substrate bias voltages on the crystal orientation and morphology of the films was determined by using X-ray diffraction and FE-SEM, respectively. And the effect of crystal orientation and morphology of the magnesium thin films on corrosion behavior was estimated by measuring electro-chemical anodic polarization curves in deaerated 3% NaCl solution. From the results, corrosion resistance of Mg thin films was improved by controlling the crystal orientation and morphology of the films with effective use of plasma ion plating technique.

• Journal of the Korean Society for Heat Treatment
• /
• 제33권1호
• /
• pp.1-12
• /
• 2020

In this study, thin foil fabrication using Ni/Ni₃Al single crystal was performed by cold-rolling. It was found that the cold-rolling behavior was strongly dependent on the initial crystallographic orientation rather than morphology of Ni₃Al precipitates. The deformation banding was formed in the case of (100)[001]- and (210)[001]-oriented specimens at 83% reduction in thickness. However, the effects of Ni₃Al precipitates morphology on the microstructure evolution of Ni/Ni₃Al single crystals during cold-rolling were not so serious comparing with the effects of initial crystallographic orientation. Therefore, it could be concluded that the deformation behavior of Ni/Ni₃Al single crystals at serious strain level was strongly dependent on the initial crystallographic orientation rather than the morphology of Ni₃Al precipitates, whereas the initial deformation behavior was related to both crystallographic orientation and the morphology of Ni₃Al precipitates.

• The Korean Nurse
• /
• 제37권4호
• /
• pp.58-71
• /
• 1998

The purpose of this study was to contribute the improvement of nursing staff development by implementing of effective and organized orientation program using the measure of effectiveness in the application of preceptor program with the reduction of the time of New entry nurse orientation. The subjects were comprised of 116 new entry nurses(59 new entry nurses were employed at June, 1996 and 57 at May & July, 1997) and 79 preceptors, who were in charge of new entry nurse orientation at 1997. These date were collected from June 18, 1996 to August 29, 1997. The characteristics of questionairs applied in this study were general characteristics(7 questions), knowledge of nursing care(138 questions); attitude toward her profession(40 questions) and the degree of satisfaction for the program(5 questions). The questionnairs were developed by the researchers of Asan Medical Center. The Check-list for basic nursing skill were used for the measurement of nursing skill which was developed by nursing department of AMC. The data were analyzed for the mean, standard deviation, difference of mean, ANOV A & t-test. The results of this study are as follows : 1) The changes in knowledge of nursing care : After three months of training the difference of mean between before and after the orientation was higher than the result of two month period training. However, the result was insignificant(p= .469). 2) Performance in nursing practice : Two month period orientation was more effective than three-month training period, however, the statistical significance can not be reached than 3 month period, which resulted in insignificant difference(p=.150). 3) The change in attitude toward her profession : After three-month of orientation, the difference of mean between before and after the orientation was higher than 2 month period orientation, which resulted in significant difference (p=.000). 4) The degree of satisfaction for the program with the time of new entry nurse orientation : After two-month of orientation, the mean of points was 2.57 where the score is higher than 3 month period with mean of 2.30. It resulted in significant difference(p=.000).

• Journal of Electrical Engineering and Technology
• /
• 제2권4호
• /
• pp.478-484
• /
• 2007

This paper deals with the high efficient vector control for the reduction of copper losses of the doubly fed motor. Firstly, the feedback linearization control based on Lyapunov approach is employed to design the underlying controller achieving the double fluxes orientation. The fluxes# controllers are designed independently of the speed. The speed controller is designed using the Lyapunov method especially employed to the unknown load torques. The global asymptotic stability of the overall system is theoretically proven. Secondly, a new Torque Copper Losses Factor is proposed to deal with the problem of the machine copper losses. Its main function is to optimize the torque in keeping the machine saturation at an acceptable level. This leads to a reduction in machine currents and therefore their accompanied copper losses guaranteeing improved machine efficiency. The simulation and experimental results in comparative presentation confirm largely the effectiveness of the proposed DFIM control with a very interesting energy saving contribution.

• Korean Journal of Metals and Materials
• /
• 제49권6호
• /
• pp.454-461
• /
• 2011

In this study, the relationship between corrosion resistance and microstructural characteristics such as grain size reduction, preferred orientation, and homogenous distribution of elements and impurity by mechanical milling of magnesium powder was investigated. Mechanical milling of pure magnesium powder exhibited a complex path to grain refinement and growth together with preferred orientation reversal with milling time. It was also found that anisotropic formation of dislocation on the basal plane of magnesium was initially the dominant mechanism for grain size reduction. After 60 hrs of milling, grain coarsening was observed and interpreted as a result of the strain relaxation process through recrystallization. In spite of the finer grain size and strong (002) texture developed in the sample prepared by spark plasma sintering at $500^{\circ}C$ for 5 min after mechanical milling for 2hrs, the sample showed a higher corrosion rate. The results from this study will be helpful for better understanding of the controlling factor for corrosion resistance and behaviors of mechanical milled magnesium powders.

• Journal of the Korean Solar Energy Society
• /
• 제33권2호
• /
• pp.28-34
• /
• 2013

It is essential to reduce building energy consumption in office building because government enact policy which encourages building energy certification from 2013. Office building has high cooling energy demand due to large glazed area of facade in these days. Shading devices can be an alternative of reducing high cooling energy demand. So, this study simulated a variety of exterior venetian blinds to know how much building energy be affected by orientation and reflectance of slat. The results of this study are based on Seoul weather data. The following is a summary of this study. 1) As a slat of venetian blinds has the lower reflectance, the more building energy reduced. Reflectance is usually affected by color and material of slat. In case reflectance is 0.2 reduce 4% of building energy than reflectance is 0.8. 2) Horizontal exterior venetian blinds are more effective than vertical exterior venetian blinds in all of orientation. Horizontal shape is average 16% more effective in shading effect than vertical shape. 3) In this case study, the most effective shading device is low reflectance horizontal exterior venetian blinds that result about 18% building energy reduction than no shade model. The results of this research can be used to plan shading devices for energy conservative office building.