• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.1
• /
• pp.97-106
• /
• 2011

Purpose: This review article was written to theoretically compare the depressing force (pressure, adhesion) to the cornea between when the spherical lenses were being tightly and flat fitted. Methods: Mathematical equations and their numerical solution programs (model) were formulated to calculate the depressing (adhesion) force to the cornea by both the tightly and flat fitted contact lenses. Based on this proposed model the effects of parameters characterizing a contact lens such as BCs, diameters, edge shape and corneal shape (ratio of long and short corneal axis, p) on the depressing force to the cornea were predicted/analyzed in both tightly and flat fitting regimes. Results: Corneal adhesion increased as the corneal p-value increased. Adhesion increase caused by the increased p-value was much larger in flat fitted case than in tight fitted one. Corneal adhesion reduced abruptly as the BC increased in flat fitting regimes while the adhesion rise was insignificant in tight fitting ones. Reduction in corneal adhesion due to lens-size increase was predicted to be insignificant in both tight and flat fitting regimes. Both the lens edge shape (edge angle) and thickness were relevant only in tight fitting regime. Corneal adhesion increased as the increased with tight-fitted lenses. As the thickness of tight fitted lenses increased, corneal adhesion inversely decreased. Conclusions: The two most significantly affecting the depressing force to cornea were found to be the degree of corneal bending toward the periphery and the BCs of lenses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.28-38
• /
• 2020

Semiconductor deposition equipment is an important example of Complex Products and Systems (CoPS) and requires in-depth understanding of user requirements. For this reason, we analyzed and compared users' and producers' perspectives on the quality attributes of semiconductor deposition equipment using the Kano model. The results show that the patterns of users' perspectives were different from those of producers. Out of 22 level-2 quality attributes, producers evaluated all 22 attributes as attractive qualities, but users evaluated only 6 as "attractive," 10 as "indifferent," 2 as "must have," and 4 as "other." Although all quality attributes were attractive for producers, only those related to reliability were attractive or must-have qualities, and all others were "indifferent." This result implies that the perspectives on quality attributes may be different between users and producers, and producers should revise their perspectives and strategies. In addition, the results support the characteristics of CoPS suggested by literature implying that performance is more important than economies of scale and cost reduction. It is suggested that producers of semiconductor deposition equipment strategize their approaches to users by considering the characteristics of CoPS.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.466-473
• /
• 2020

A marine air drone is a new device that can be used to respond to and prevent marine casualties. Determining the districts where marine air drones can be deployed helps the government decision makers identify efficient policy. The aim of this study is to develop a model using the fuzzy-analytic hierarchy process (F-AHP) and additive ratio assessment (ARAS) method to evaluate appropriate districts for deploying marine air drones. To verify the applicability of the proposed model, a case study was performed with respect to the Korea coast guard (KCG) districts. Since the deployed marine air drones are characterized by a high degree of overlap between the evaluation attributes. the F-AHP is used to determine the weights of identified criteria. The results of this study, show that missing people from the shore was the most important criterion for deployment of the drone. For ranking the local districts of the KCG, the ARAS is applied in the case study with the single goal of 50% reduction in marine casualties. Consequently, the highest priority district was identified as Mokpo, followed by Incheon, Seogwipo, Taean, Wando, Yeosu, Pohang, Tongyeong, Gunsan, Bolyeong, Jeju, Buan, Donghae, Sokcho, Ulsan, Uljin, Busan, Changwon, and Pyeongtaeg.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.1
• /
• pp.5-13
• /
• 2008

Purpose: This review article was written to investigate what kind of forces are acting on the contact lens fitted on the cornea and its subsequent motion. Methods: A capillary action-induced force develops in the tear layer between the lens and cornea, which leads to the restoring force due to difference in layer thickness according to lens rotation. The characteristics of the lens movement can be determined by the various factors such as friction between eyelid and lens, acceleration force based on blinking and the restoring force incorporated with the viscous damping force. A mathematical model which consists of the differential equations and their numerical solution was proposed to analyze the damped motion of lenses. The model predicts the time dependence of lenses during and after the blink varying the BC, blink period and eyelid pressure. Results: It was found that both the blink period and lid pressure increases the movement increases because of the enhanced lid friction. As the BC increases the viscous damping reduces due to the lacrimal layer's increase which resulted in the enhanced lens motion. After blink the lens illustrates the damped oscillation because of the restoring force by the increased lacrimal layer thickness and reduced viscous resistance. The time for the lens to return to the equilibrium shortens as the BC increase because of the resistance reduction. Conclusions: The movement of the contact lens is governed by the characteristics of the lacrimal layer between the lens and cornea as well as the lid blink.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6447-6454
• /
• 2013

Seawater intake systems have significant problems due to seawater pollution, suspended solids, unstable intake and maintenance etc. An underground type seawater intake system was newly developed to overcome the existing weaknesses and was facilitated in Gyukpo port. In this study, to check the performance of the new system, the samples for water quality and the 3-D numerical modeling test were conducted. The five times test included the COD, total nitrogen, total phosphorus, pH, and suspended solid for the intake system. The analyses show that the COD, total nitrogen, total phosphorus, PH showedminor changes before and after. On the other hand, the change in suspended solids was significant and water was purified below 5 mg/l, first level fisheries water, after. The numerical model adopted the RNG $k-{\epsilon}$ algorithm and the CFX model based on the finite volume method. The porosity algorithm was used to reproduce filtered-sand, outer diameter, and thickness. The numerical results showed that the double pipe is advantageous in that it provides a uniform pressure between the inner and outer pipe for the flow to be stable. In addition, the use of multiple intake pipes did not interfere with the discharge reduction of 0.98 at the both intake pipes compared with the central intake pipe.

• Nutrition Research and Practice
• /
• v.9 no.4
• /
• pp.379-384
• /
• 2015

BACKGROUND/OBJECTIVE: Apolipoprotein A5 gene promoter region T-1131C polymorphism (APOA5 T-1131C) is known to be associated with elevated plasma TG levels, although little is known of the influence of the interaction between APOA5 T-1131C and lifestyle modification on TG levels. To investigate this matter, we studied APOA5 T-1131C and plasma TG levels of subjects participating in a three-month lifestyle modification program. SUBJECTS/METHODS: A three-month lifestyle modification program was conducted with 297 participants (Age: $57{\pm}8years$) in Izumo City, Japan, from 2001-2007. Changes in energy balance (the difference between energy intake and energy expenditure) and BMI were used to evaluate the participants' responses to the lifestyle modification. RESULTS: Even after adjusting for confounding factors, plasma TG levels were significantly different at baseline among three genotype subgroups: TT, $126{\pm}68mg/dl$; TC, $134{\pm}74mg/dl$; and CC, $172{\pm}101mg/dl$. Lifestyle modification resulted in significant reductions in plasma TG levels in the TT, TC, and CC genotype subgroups: $-21.9{\pm}61.0mg/dl$, $-20.9{\pm}51.0mg/dl$, and $-42.6{\pm}78.5mg/dl$, respectively, with no significant differences between them. In a stepwise regression analysis, age, APOA5 T-1131C, body mass index (BMI), homeostasis model assessment-insulin resistance (HOMA-IR), and the 18:1/18:0 ratio showed independent association with plasma TG levels at baseline. In a general linear model analysis, APOA5 T-1131C C-allele carriers showed significantly greater TG reduction with decreased energy balance than wild type carriers after adjustment for age, gender, and baseline plasma TG levels. CONCLUSIONS: The genetic effects of APOA5 T-1131C independently affected plasma TG levels. However, lifestyle modification was effective in significantly reducing plasma TG levels despite the APOA5 T-1131C genotype background.

• Journal of Convergence for Information Technology
• /
• v.8 no.1
• /
• pp.253-263
• /
• 2018

Textile fashion industry is a core foundation industry, having the majority of companies with 10 or more workers, in Northern Gyeonggi Province. however the industry is mostly comprised of small unit-stream enterprises, orders are greatly reduced due to lately accelerated overseas expansion of medium/large-sized vendors and the growth-inhibiting vicious circle has being set in, as this situation causes the reduction of investment. For resolving the problems, this study proposes required political factors and concrete policy proposals by designing AHP research model(4 layers and 36 elements), based on grasp of the transitional aspect of industrial scale and business environment through analysis of various industrial statistics, preceding research such as related literature search and (industrial/academic/R&D/government) specialist opinion investigation, and then calculating relative importance and priority of each factor(element) within each layer. And for raising usefulness and availability of the research result by concretely suggesting the vision, strategies, core tasks and detailed projects in which the research model and deduced result are reflected.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.635-641
• /
• 2019

Domestic southwest offshore wind farms have problems such as the reduction in fishing rights by prohibiting vessel traffic, which delays their development. As such, there is a need to develop offshore windfarms in Europe to permit the passage of vessels and fishing operations in specific offshore windfarm areas. In this study, we used the environmental stress (ES model) and the IALA Waterway Risk Assessment Program (IWRAP) to determine the ratio of risk to the route type (cross pattern, grid pattern) and traffic volume (present, 3 times, 5 times and 10 times) to derive the risk factors of specific vessels for offshore windfarms. As a result, ship operators' risk related to offshore windfarms did not rise in both route types and there was no significant difference in the annual probability of collision in the present traffic volume. In conditions that increased traffic volume by 3 times, 5 times and 10 times, the risk ratio increased as ship operator risk and collision probability increased at the crossing points. Furthermore, when the traffic volume of the ship increased, the risk could be more effectively distributed in the grid route compared to the cross route. The results of this study are expected to apply to the operation type, route operation method, safety measures, etc. in offshore wind farms.

• The korean journal of orthodontics
• /
• v.28 no.4 s.69
• /
• pp.641-657
• /
• 1998

This study was undertaken to compare the bond strength and the fracture site of new and recycled brackets according to the base design. 252 sound premolars extracted for orthodontic treatment were collected and Type I, Type II, Type III brackets were divided into four groups by recycling method Each bracket was then bonded to an extracted premolar. Instron Universal Testing Machine(model W) was used to measure the shear bond strength, and the surface of the recycled brackets were viewed in SEM For the analysis of the results, one way ANOVA and Scheffe's multiple range test was executed using the SPSSWIN program. 1. The shear bond strength showed statistically significant difference according to the bracket base design(p<0.001). Type III bracket(round indentation base, micro-etched) showed the highest bond strength, Type I bracket(foil-mesh base) was second, and Type II bracket(grooved integral base, micro-etched) was last. 2. The effect of recycling on the bond strength was different according to bracket type. The shear bond strength of Type I, Type II brackets showed the smallist reduction when treated for 1 minute in Big Jane(p<0.05), but the shear bond strength of Type III brackets showed no statistically significant difference according to recycling method(p>0.05). 3. In Type I, Type II brackets, frequent fracture site was bracket-resin interface, but in Type III brackets, about half of the resin was retained on the tooth surface frequently. 4. The shear bond strength was highest when about half of the resin was retained on the tooth surface(p<0.05). 5. The resin remnant on the bracket base after recycling had no effect on the shear bond strength.

• Korea-Australia Rheology Journal
• /
• v.21 no.1
• /
• pp.59-69
• /
• 2009

The prediction of pressure drop for a droplet flow in a confined micro channel is presented using FE-FTM (Finite Element - Front Tracking Method). A single droplet is passing through 5:1:5 contraction - straight narrow channel - expansion flow domain. The pressure drop is investigated especially when the droplet flows in the straight narrow channel. We explore the effects of droplet size, capillary number (Ca), viscosity ratio ($\chi$) between droplet and medium, and fluid elasticity represented by the Oldroyd-B constitutive model on the excess pressure drop (${\Delta}p^+$) against single phase flow. The tightly fitted droplets in the narrow channel are mainly considered in the range of $0.001{\leq}Ca{\leq}1$ and $0.01{\leq}{\chi}{\leq}100$. In Newtonian droplet/Newtonian medium, two characteristic features are observed. First, an approximate relation ${\Delta}p^+{\sim}{\chi}$ observed for ${\chi}{\geq}1$. The excess pressure drop necessary for droplet flow is roughly proportional to $\chi$. Second, ${\Delta}p^+$ seems inversely proportional to Ca, which is represented as ${\Delta}p^+{\sim}Ca^m$ with negative m irrespective of $\chi$. In addition, we observe that the film thickness (${\delta}_f$) between droplet interface and channel wall decreases with decreasing Ca, showing ${\delta}_f{\sim}Ca^n$ Can with positive n independent of $\chi$. Consequently, the excess pressure drop (${\Delta}p^+$) is strongly dependent on the film thickness (${\delta}_f$). The droplets larger than the channel width show enhancement of ${\Delta}p^+$, whereas the smaller droplets show no significant change in ${\Delta}p^+$. Also, the droplet deformation in the narrow channel is affected by the flow history of the contraction flow at the entrance region, but rather surprisingly ${\Delta}p^+$ is not affected by this flow history. Instead, ${\Delta}p^+$ is more dependent on ${\delta}_f$ irrespective of the droplet shape. As for the effect of fluid elasticity, an increase in ${\delta}_f$ induced by the normal stress difference in viscoelastic medium results in a drastic reduction of ${\Delta}p^+$.