• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.10
• /
• pp.1450-1459
• /
• 2001

These experiments were conducted to investigate the effects of different feeding and processing methods of diets on performance, morphological changes in the small intestine and nutrient digestibility of growing-finishing pigs. One-hundred fifty growing pigs ($Yorkshire{\times}Landrace{\times}Duroc$; initial body weight of $23.33{\pm}0.75kg$) and one-hundred twenty finishing pigs ($Yorkshire{\times}Landrace{\times}Duroc$; initial body weight of $59.22{\pm}0.56kg$) were used in Exp. 1 and Exp. 2, respectively. Pigs were grouped on the basis of body weight and gender, and randomly allotted into 6 different treatments with 5 replications in each treatment in a $2{\times}3$ factorial arrangement. Treatments were 1) dry feeding with a mash diet (DM), 2) dry feeding with a pelleted diet (DP), 3) dry feeding with an expanded crumble diet (DEC), 4) dry/wet feeding with a mash diet (WM), 5) dry/wet feeding with a pelleted diet (WP), and 6) dry/wet feeding with an expanded crumble diet (WEC). In Exp. 1 (growing phase), there was no significant difference in average daily gain (ADG) and average daily feed intake (ADFI) among treatments during the entire experimental period, but feed conversion ratio (FCR) was significantly (p<0.05) improved in pigs fed pelleted diets regardless of feeding method. FCR was best in pigs fed a DP diet and worst in pigs fed a WM diet. Pigs fed a pelleted diet showed a 6.2% or 4.0% improvement in FCR compared with those fed a mash diet or an expanded crumble diet. Water disappearance was not significantly affected by dry/wet feeding or feed processing. Significant differences in villus height were not found among treatments, but villus height tended to be improved by dry/wet feeding. Dry/wet feeding or feed processing did not affect crypt depth. Digestibilities of calcium and phosphorus were significantly (p<0.05) improved in pigs fed an expanded crumble diet compared with pigs fed mash diets. Especially, pigs fed a WEC diet digested 8.1% more P than those fed a DM diet. Feed cost per kg weight gain (FCG) tended to be increased by dry/wet feeding rather than dry feeding. In Exp. 2 (finishing phase), ADG and ADFI were not significantly different among treatments, but a significant difference in FCR was found among feed processing forms. The best FCR was obtained in pigs fed a pelleted diet. Pigs fed a DP diet showed a 11.3% improvement compared with those fed a DEC diet. Water disappearance was significantly (p=0.0408) decreased by feeding the mash diet. However, water disappearance was not affected by dry/wet feeding during the finishing period. The villus height and crypt depth were not significantly different among treatments. However, crypt depth tended to be decreased by dry/wet feeding at the mid part of the small intestine. Fat digestibility was improved by dry feeding rather than dry/wet feeding, and was improved by 4.8% by feeding pellet diets compared with expanded crumble diets. Except for carcass grade, carcass characteristics were not significantly (p<0.05) different among treatments. Carcass grade was the best in pigs fed a WP diet. Feed cost per kg weight gain (FCG) was significantly decreased in pigs fed a pelleted diet compared with those fed an expanded crumble diet, and tended to be decreased by dry/wet feeding. In conclusion, these studies suggest that feeding the pelleted diet to growing-finishing pigs can be beneficial in terms of FCR and production cost. Dry/wet feeding can be helpful for the maintenance of villus height, but may not be reflected in improved growth performance or reduction of production costs.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.1
• /
• pp.46-52
• /
• 2009

Purpose: To evaluate the usefulness of minimally invasive arthroscopy-assisted plate removal of a laterally inserted periarticular distal femur plate used for the treatment of AO type-C distal femur fractures. Materials and Methods: From October 2002 to November 2005, we evaluated 17 patients whose plates were removed through minimally invasive arthroscopy-assisted plate-removal technique and 15 patients who got their plates removed through conventional method without using arthroscopy, 32 patients in total. All these patients included in this study initially underwent open reduction and internal fixation of the distal femoral fractures with a lateral plate, and complained of continued pain over the lateral femoral condyle after the fracture fixation. The average age was 42.6 (ranges: 20~66) and initial fracture types included 16 cases of C1, 11 cases of C2, and 5 cases of C3 following AO/ASIF classification guidelines. Measured outcomes included: associated intra-articular pathologies, time needed to return to activities of daily living, patients' overall satisfaction, complications following the removal of hardware, and pain before and 6 months after the operation. Results: The distal-most end of the plate was placed in the knee joint in all cases and damage of the lateral articular capsule was found in 23 cases. Continuous wound discharge after surgery was found in one case who underwent arthroscopy-assisted plate removal, and it was treated by irrigation and re-suture. Average time needed to return to activities of daily living was 7 days in arthroscopy assisted group and 7.6 days in conventionally removed group. Fourteen patients (82.4%) who underwent arthroscopyassisted plate-removal reported above 'fair' satisfaction and the Visual analog scale pain score decreased from 4.9 to 1.9, six months after the plate removal. Thirteen patients(86.7%) who underwent conventional plate removal reported above 'fair' satisfaction and the Visual analog scale pain score decreased from 5.2 to 2.5, six months after the operation. Conclusion: Through minimally invasive arthroscopic-assisted plate removal, intrarticular pathology of the knee joint was able to be simultaneously identified and treated at the time of hardware removal. Damage of lateral capsule of the knee joint caused by the inserted plate for the treatment of type C distal femoral fracture was very frequently found and following the plate removal, patients experienced an improvement in pain score. We therefore recommend routine lateral distal femoral plate removal if the bony union is attained in such cases as type C distal femoral fractures whose distal most end of the plates are located in the joint.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.216-225
• /
• 2011

Following the proliferation of three-dimensional video contents and displays, many terrestrial broadcasting companies have been preparing for stereoscopic 3DTV service. In terrestrial stereoscopic broadcast, it is a difficult task to code and transmit two video sequences while sustaining as high quality as 2DTV broadcast due to the limited bandwidth defined by the existing digital TV standards such as ATSC. Thus, a terrestrial 3DTV broadcasting with a heterogeneous video codec system, where the left image and right images are based on MPEG-2 and H.264/AVC, respectively, is considered in order to achieve both high quality broadcasting service and compatibility for the existing 2DTV viewers. Without significant change in the current terrestrial broadcasting systems, we propose a joint rate control scheme for stereoscopic 3DTV service based on the heterogeneous dual codec systems. The proposed joint rate control scheme applies to the MPEG-2 encoder a quadratic rate-quantization model which is adopted in the H.264/AVC. Then the controller is designed for the sum of the left and right bitstreams to meet the bandwidth requirement of broadcasting standards while the sum of image distortions is minimized by adjusting quantization parameter obtained from the proposed optimization scheme. Besides, we consider a condition on maintaining quality difference between the left and right images around a desired level in the optimization in order to mitigate negative effects on human visual system. Experimental results demonstrate that the proposed bit rate control scheme outperforms the rate control method where each video coding standard uses its own bit rate control algorithm independently in terms of the increase in PSNR by 2.02%, the decrease in the average absolute quality difference by 77.6% and the reduction in the variance of the quality difference by 74.38%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.111-112
• /
• 2009

Diamond-like carbon (DLC) is a convenient term to indicate the compositions of the various forms of amorphous carbon (a-C), tetrahedral amorphous carbon (ta-C), hydrogenated amorphous carbon and tetrahedral amorphous carbon (a-C:H and ta-C:H). The a-C film with disordered graphitic ordering, such as soot, chars, glassy carbon, and evaporated a-C, is shown in the lower left hand corner. If the fraction of sp3 bonding reaches a high degree, such an a-C is denoted as tetrahedral amorphous carbon (ta-C), in order to distinguish it from sp2 a-C [2]. Two hydrocarbon polymers, that is, polyethylene (CH2)n and polyacetylene (CH)n, define the limits of the triangle in the right hand corner beyond which interconnecting C-C networks do not form, and only strait-chain molecules are formed. The DLC films, i.e. a-C, ta-C, a-C:H and ta-C:H, have some extreme properties similar to diamond, such as hardness, elastic modulus and chemical inertness. These films are great advantages for many applications. One of the most important applications of the carbon-based films is the coating for magnetic hard disk recording. The second successful application is wear protective and antireflective films for IR windows. The third application is wear protection of bearings and sliding friction parts. The fourth is precision gages for the automotive industry. Recently, exciting ongoing study [1] tries to deposit a carbon-based protective film on engine parts (e.g. engine cylinders and pistons) taking into account not only low friction and wear, but also self lubricating properties. Reduction of the oil consumption is expected. Currently, for an additional application field, the carbon-based films are extensively studied as excellent candidates for biocompatible films on biomedical implants. The carbon-based films consist of carbon, hydrogen and nitrogen, which are biologically harmless as well as the main elements of human body. Some in vitro and limited in vivo studies on the biological effects of carbon-based films have been studied [$2{\sim}5$].The carbon-based films have great potentials in many fields. However, a few technological issues for carbon-based film are still needed to be studied to improve the applicability. Aisenberg and Chabot [3] firstly prepared an amorphous carbon film on substrates remained at room temperature using a beam of carbon ions produced using argon plasma. Spencer et al. [4] had subsequently developed this field. Many deposition techniques for DLC films have been developed to increase the fraction of sp3 bonding in the films. The a-C films have been prepared by a variety of deposition methods such as ion plating, DC or RF sputtering, RF or DC plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance chemical vapor deposition (ECR-CVD), ion implantation, ablation, pulsed laser deposition and cathodic arc deposition, from a variety of carbon target or gaseous sources materials [5]. Sputtering is the most common deposition method for a-C film. Deposited films by these plasma methods, such as plasma enhanced chemical vapor deposition (PECVD) [6], are ranged into the interior of the triangle. Application fields of DLC films investigated from papers. Many papers purposed to apply for tribology due to the carbon-based films of low friction and wear resistance. Figure 1 shows the percentage of DLC research interest for application field. The biggest portion is tribology field. It is occupied 57%. Second, biomedical field hold 14%. Nowadays, biomedical field is took notice in many countries and significantly increased the research papers. DLC films actually applied to many industries in 2005 as shown figure 2. The most applied fields are mold and machinery industries. It took over 50%. The automobile industry is more and more increase application parts. In the near future, automobile industry is expected a big market for DLC coating. Figure 1 Research interests of carbon-based filmsFigure 2 Demand ratio of DLC coating for industry in 2005. In this presentation, I will introduce a trend of carbon-based coating research and applications.

• The Korean Journal of Nuclear Medicine
• /
• v.31 no.1
• /
• pp.9-18
• /
• 1997

The therapeutic efficacy of antipsychotic drugs is generally attributed to their ability to block dopamine $D_2$ receptors. Classical $D_2$ antagonists are not effective to treat negative symptoms and produce extrapyramidal side effects On the other hand, atypical antipsychotic agents ameliorate negative symptoms without producing extra-pyramidal side effects, and it is reported to be associated with blockade of serotonin $5-HT_2$ receptors. The purpose of this study was to evaluate the effect of risperidone on neuroreceptors in the rat brain by Quantitative autoradiography method. In acute treatment group, risperidone was injected into Peritoneal cavity of male Wistar rats with dose of 0, 0.1, 0.25, 0.5, 1.0 and 2.0mg/kg in each group(5/group), and they were decapitated after 2 hours. In chronic treatment group, risperidone was injected with dose of 0, 0.1, and 1mg/kg(I.P.) for 21 days and decapitated after 24 hours following last treatment. The effect of risperodone on the binding of [$^3H$]spiperone to $5-HT_2$ and $D_2$ receptors were analysed in 4 discrete regions of the striatum, nucleus accumbens, and frontal cortex by quantitative autoradiography Acute treatment with risperidone reduced cortical $5-HT_2$ specific [$^3H$]spiperone binding to 32% of vehicle-treated control. Subcortical $5-HT_2$ specific [$^3H$]spiperone binding was not affected at all dose groups whereas a significant reduction (57%) in $D_2$ specific [$^3H$]spiperone binding was observed in risperidone treated group at doses of 1-2mg/kg. Chronic treatment with risperidone produced a decrease in the maximal number of cortical $5-HT_2$ receptors to 51% and 46% of control in 0.1mg/kg & 1mg/kg treated group respectively. In conclusion, risperidone is a cortical serotonin receptor antagonist with relatively weak antagonistic action on dopamine receptors. These effects oil neuroreceptors may explain the therapeutic effect of risperidone as a atypical antipsychotic agents.

• Korean Journal of Ecology and Environment
• /
• v.48 no.4
• /
• pp.229-237
• /
• 2015

This study aims to offer basic data to effectively preserve and manage pine forests using more precise pine forests' distribution status. In this regard, this study predicts the geographical distribution change of pine forests growing in South Korea, due to climate change, and evaluates the spatial distribution characteristics of pine forests by age. To this end, this study predicts the potential distribution change of pine forests by applying the MaxEnt model useful for species distribution change to the present and future climate change scenarios, and analyzes the effects of bioclimatic variables on the distribution area and change by age. Concerning the potential distribution regions of pine forests, the pine forests, aged 10 to 30 years in South Korea, relatively decreased more. As the area of the region suitable for pine forest by age was bigger, the decreased regions tend to become bigger, and the expanded regions tend to become smaller. Such phenomena is conjectured to be derived from changing of the interaction of pine forests by age from mutual promotional relations to competitive relations in the similar climate environment, while the regions suitable for pine forests' growth are mostly overlap regions. This study has found that precipitation affects more on the distribution of pine forests, compared to temperature change, and that pine trees' geographical distribution change is more affected by climate's extremities including precipitation of driest season and temperature of the coldest season than average climate characteristics. Especially, the effects of precipitation during the driest season on the distribution change of pine forests are irrelevant of pine forest's age class. Such results are expected to result in a reduction of the pine forest as the regions with the increase of moisture deficiency, where climate environment influencing growth and physiological responses related with drought is shaped, gradually increase according to future temperature rise. The findings in this study can be applied as a useful method for the prediction of geographical change according to climate change by using various biological resources information already accumulated. In addition, those findings are expected to be utilized as basic data for the establishment of climate change adaptation policies related to forest vegetation preservation in the natural ecosystem field.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.937-942
• /
• 2004

Physicochemical properties and mineral composition of seaweed salts prepared by incineration and osmotic dehydration methods were determined. As the incineration temperature increased, yield of seaweed salts, insoluble solids, pH, alkalinity, and oxidation-reduction potential (ORP) decreased. Alkalinity of salt prepared with sea tangle was higher than that of sea mustard. ORP decreased by incineration above $700^{\circ}C$, and was lower in salt with sea tangle. As incineration temperature increased, amounts of K and Ca in seaweed salt increased, whereas that of Mg decreased. Potassium and Ca contents of seaweed salt increased remarkably compared with those of common salt. Potassium content of sea tangle salt was higher than that of sea mustard. As incineration time increased, yield of seaweed salts, insoluble solid content, and pH decreased, whereas ORP of the salt increased. Potassium content of seaweed salt with incineration time, while Ca and Na contents decreased after incineration of 8 and 4 hr, respectively. Yield of seaweed salt by osmotic dehydration increased as immersion time in sea water increased. pH of salt from sea mustard was higher than that of sea tangle. ORP of seaweed salt dried three times was -128.8 mV, significantly lower than that of salt prepared by incineration method. As sea water immersion time increased, Mg content of seaweed salt increased significantly, while Ca content decreased. Potassium content of seaweed salt was higher in sea tangle salt. In case of salt prepared by incineration of residuals, pH increased with immersion time but ORP decreased.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.80-86
• /
• 2007

This experiment was conducted to investigate the changes of pork meat quality characteristics exposed to ozone gas for 5, 10, and 15 min and then vacuum packaged during storage for 0, 5, 10, 15, and 20 day at $4^{\circ}C$. The ozone gas exposed groups of pork loin cuts (OZM) had slightly higher pH value compared to the control at day 0 and 5 (p<0.01). The 15 min exposure of ozone gas groups showed significantly (p<0.01) higher TBARS value than that of control at the day 15 and 20. However, there was no significant difference in all groups at day 0,5, and 10. The CIE $L^*$ and $b^*$ values of OZM showed no significant difference between control and ozone gas treated groups during storage. The loin cut color of ozone gas exposure for 15 min had significantly lower CIE $a^*$ values than the other groups at day 0,5, and 15 (p<0.01). The aerobic plate count and coliform bacteria count of pork loin cuts exposed ozone gas significantly (p<0.01) was reduced at day 0 by about $0.45-1.04\;log_{10}CFU/g$ and $0.26-0.30\;log_{10}CFU/g$, respectively. As ozone gas exposure time extended, the aerobic plate count and coliform bacteria count of OZM were increased at day 0, 5, and 10 (p<0.01). However, there were no significant differences observed among groups at day 20 in the counts of aerobic and coliform bacteria. In conclusion, the meat cuts exposed to ozone gas for 5 and 10 min before packing may be a reasonable packing method regarding the effects of ozone level on meat oxidation, color change and microbial reduction.

• Applied Biological Chemistry
• /
• v.8
• /
• pp.65-73
• /
• 1967

For the study of method for salt elimination aimed at reforming tidal land into normal paddy fields in a short period with reduction of periods requiring for elimination of saline, CHP (a kind of Ca-hum ate), a soil conditioner made of peat as a main material was tried. In the pot experiment, effect on elimination of salt, improvement of physical-chemical characteristics and rice cultivation test were studied. The results of these tests are as follows: 1, CHP treatment somewhat improves aggregation state with some effect on aggregation. 2. CHP treatment is remarkably effective in permeability which increases with 1.0 percent treatment by three times in percolation rate, and by 4.5 times in volume of leached water respectively. 3. With the increase of CHP amounts, salt was eliminated in short period. When 80% of the total Na was leached in 1.0% CHP-A treated pot, control pot begins permeable. 4. CEC and phosphorous absorption capacity are not influenced by CHP treatment. 5. Growing state of rice is greatly influenced by rainfalls. Growth of rice in tidal land however are almost similar to those in normal paddy fields with layer amounts of CHP treatment. With salt content in the soils, saline hazard and numbers of ineffective stems, amounts of unmatured grain are increased. 6. With the treatment of CHP yields of rough rice were increased. With 0.5% CHP treatment the yields were similar to those of the normal paddy fields. With 1.0% CHP-A treatment, the yields were increased by 15 times more than those of none treated soil and by 25 percent more than normal paddy soils.

• Korean Security Journal
• /
• no.2
• /
• pp.259-289
• /
• 1999

The Security Industry has dynamic working conditions. So this study intends to find the advisable direction for the reduction of accidents. To achieve the aim, the investigation of documents and the examinations of actual proofs have been done to figure the theoretical background and to see the basic knowledge of security industry. The questionnaire was composed of two question sheets to search real data and actual proofs, with making targets of pure security organization and personnel. The one consists of 9 questions to find the scale and extent of security organizations and the population and character of security personnel, and the other 25 questions in 3 major areas to analyze the causes, the frequency rates, the factors, and the condition of accidents. The period of survey was July 15th to October 15th in 1997 by mail/telephone/interview. The questionnaires were efficiently returned from 102 different organizations including the public security groups of Seoul Metropolitan Police Bureau and so on, with the information of 8,222 persons having worked for Korean Security Industry in 1996. So being based on the reality, some meaningful facts were found, and were compared with the national statistics of the Government. This study is made up of 5 chapters : in the 1st chapter the motivation, the object, the method, the direction and the limitation of the approach were presented ,in the 2nd chapter the theoretical background were inferred ; in the 3rd chapter the collected data of accidents in Korean Security Industry were analyzed and explained on the base of the questionnaires , in the 4th chapter the advisable facts connected with preventing accidents were mentioned ; in the last the conclusion were stated. With the replies of 102 different organizations including the information of 8,222 persons in 1996, the main facts found or analyzed through this study are as follows. Firstly, accident is an unpredictable and occasional event. It occurs to man and/or thing, but the frequency rate of accidents in Korean Government and other Institutes has been calculated and evaluated only in the point of the accident related with man. Secondly, the factors of accidents are firstly relevant to the way preventing accidents in Security Industry in Korea. However the frequency rate is academically calculated and evaluated by at once man(population) and hour(time). But the Government has done the rate only by man(population). This can be improper and inaccurate rates. Thirdly, the confused concept of security is used in Korean Government, academic society, corporation and so on. Therefore the detailed formation of the concept is needed for the development of Security Industry in Korea. Fourthly, security organizations can be classified into 'public security(public law enforcement)' and 'private security' according to its identification, and furthermore 'private security' can be divided into 'facilities-guard service', 'body-guard service', and 'patrol service' according to its major role. Fifthly, in the viewpoint of the number of both organization and population,'facilities-guard service' is centered in Korean 'private security'. According to the analyzed results of the questionnaires in this study, the frequency rate of accidents of Korean Security Industry is 0.43(%) totally in 1996 : 'facilities-guard service' 0.54(%), 'body-guard service' 0.12(%), and 'patrol service' 0.21(%) in 'private security', and 'public security' 0.20(%). With regard to the accident frequency rate of organization and population, 'facilities-guard service' is the highest. The accident frequency rate of population in 'facilities-guard service' organization ranges dispersively from 0.20(%) to 11.11(%). Sixthly, the accidented rate of workers having serviced for under one year is 57.6(%). This can mean that the main factor of accidents in Korean Security Industry is the lack of role-understanding and training/education. And another factor can be found on the time of accident occurrence. Many accidents have been occurred on the relaxed points like as just after lunch and morning rush-hour. Lastly, the major advisable facts related to preventing accidents are as follows : The workers who are over fifty years old in 'facilities-guard service' organization need to be educated for preventing accidents ; It is desirable that the training and education to prevent accidents should be practiced in the time of pre-service ; As the style of accidents and the age of the accidented are not same according to major service area('public security' and 'private security' : 'facilities-guard service', 'body-guard service', and 'patrol service'), the plans to prevent accidents must be different and various. However fracture and bruise are general accidents in Korean Security Industry ; Workers must care about traffic accident and violent fall ; It seems that the grouped working with other two persons will reduce accident occurrence possibility rather than individually single working.