• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.410-410
• /
• 2013

Next-generation nonvolatile memory (NVM) has attracted increasing attention about emerging NVMs such as ferroelectric random access memory, phase-change random access memory, magnetic random access memory and resistance random access memory (RRAM). Previous studies have demonstrated that RRAM is promising because of its excellent properties, including simple structure, high speed and high density integration. Many research groups have reported a lot of metal oxides as resistive materials like TiO2, NiO, SrTiO3 and ZnO [1]. Among them, the ZnO-based film is one of the most promising materials for RRAM because of its good switching characteristics, reliability and high transparency [2]. However, in many studies about ZnO-based RRAMs, there was a problem to get lower current level for reducing the operating power dissipation and improving the device reliability such an endurance and an retention time of memory devices. Thus in this paper, we investigated that highly reproducible bipolar resistive switching characteristics of W doped ZnO RRAM device and it showed low resistive switching current level and large ON/OFF ratio. This may be caused by the interdiffusion of the W atoms in the ZnO film, whch serves as dopants, and leakage current would rise resulting in the lowering of current level [3]. In this work, a ZnO film and W doped ZnO film were fabricated on a Si substrate using RF magnetron sputtering from ZnO and W targets at room temperature with Ar gas ambient, and compared their current levels. Compared with the conventional ZnO-based RRAM, the W doped ZnO ReRAM device shows the reduction of reset current from ~$10^{-6}$ A to ~$10^{-9}$ A and large ON/OFF ratio of ~$10^3$ along with self-rectifying characteristic as shown in Fig. 1. In addition, we observed good endurance of $10^3$ times and retention time of $10^4$ s in the W doped ZnO ReRAM device. With this advantageous characteristics, W doped ZnO thin film device is a promising candidates for CMOS compatible and high-density RRAM devices.

• Asian Journal of Atmospheric Environment
• /
• v.12 no.3
• /
• pp.255-273
• /
• 2018

To develop effective emission abatement strategies for eighteen coal-fired power plants located throughout Korea, power plant emission data and TAPM (The Air Pollution Model) were used to quantify the impact of emission reductions on primary $PM_{10}$ concentrations. TAPM was validated for two separate time periods: a high $PM_{10}$ concentration period from April 7 to 12, 2016, and a low $PM_{10}$ concentration period from June 1 to June 6 2016. The validated model was then used to analyze the impacts of five applicable power plant shut-down scenarios. The results showed that shut-down of four power plants located within the Seoul metropolitan area (SMA) would result in up to 18.9% reduction in maximum $PM_{10}$ concentrations, depending on synoptic conditions. A scenario for the shutdown of a single low stack height with highest-emission power plant located nearest to Seoul showed a small impact on averaged $PM_{10}$ concentrations (~1%) and 4.4% ($0.54{\mu}g/m^3$) decrease in maximum concentration. The scenario for four shutdowns for power plants aged more than 30 years within SMA also showed a highest improvement of 6.4% ($0.26{\mu}g/m^3$ in April) in averaged $PM_{10}$ concentrations, and of 18.9% ($2.33{\mu}g/m^3$ in June) in maximum concentration, showing almost linear relationship in and around SMA. Reducing gaseous air pollutant emissions was also found to be significant in controlling high $PM_{10}$ concentrations, indicating the effectiveness of coreduction of power plant emissions together with diesel vehicle emissions in the SMA. In addition, this study is implying that secondary production process generating $PM_{10}$ pollution may be a significant process throughout most regions in Korea, and therefore concurrent abatement of both gas and particle emissions will result in more pronounced improvements in air quality over the urban cities in South Korea.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.519-532
• /
• 2017

Studies on ancient ironmaking technologies are primarily based on archaeological surveys and scientific analysis data, and technological systems are examined by comparing the results of restorative experiments. In this study, to examine the ancient iron production technologies such as smelting and smithing in the Jungwon area, a restoration experiment was conducted based on archaeological data, and the iron and slag, etc. produced in the experiment were analyzed. Further, the changes in physicochemical properties due to the smelting of the raw material, specifically, iron ore were determined, and the smithing process, which involves fabrication of ironwares, was analyzed along with the characteristics of each step. In the case of smelting, increasing recovery rates and production of high-quality primary iron material were important for the following processes. For the iron bars produced through the smithing process, it was found that quality improvements made by reducing physical defects such as inclusions or gas holes were more important than the composition of the iron itself. The study also yielded comparative study data for various byproducts, such as smithing slag, which could be utilized in other ironmaking technology studies.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.65-78
• /
• 2007

The pollutants (Rn, CH, CO, HS, radioactive gas from radiolysis) were generated from the process of construction and operation of underground repository, and after disposal of low-intermediate radioactive waste inside there must be controlled by a ventilation system to distribute them in area where enough air is supported. Therefore, a suitable technical approach is needed especially at an underground repository that is equipped with many entry tunnels, storage tunnels, exhaust-blowing tunnels, and vertical shafts in complicated network form. For the technical approach of such a ventilation system, WIPP (Waste Isolation Pilot Plant) in U. S and SFR (Slutforvar for Reaktorafall) low-intermediate radioactive waste repository in Sweden were selected as the models, for calculating the required air quantity, organizing a ventilation network considering cross section, length, surface roughness of the air passage, and describing a calculation of resistance of each circuit. Based on these procedures, a best suited ventilation system was completed with designing proper capacity of fans and operating plan of vertical shafts. As a result of comparing the two repositories based on the geometry dimensions and ventilation facility equipment operation, more parallel circuit as in WIPP, brought decrease in resistance for entire system leading to reduce of operating costs, and the larger cross-sectional area of the SFR, the greater the percentage of disposal capacity. Accordingly, the mixture of parallel circuit of WIPP repository for reducing resistance and SFR repository formation for enlargement of disposal capacity would be the most rational and efficient ventilation system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.2
• /
• pp.183-191
• /
• 2011

The objective of this study is 10 investigate the method to produce urban climate map so as to cope with climate change and efficiently control greenhouse gas in the city by using GIS. To produce urban climate map by using GIS, statistical data and spatial data of greenhouse gases related to climate change were collected and analyzed and the correlation between the type of urban climatop and urban climate change was analyzed by establishing GIS framework data construction method to prepare urban climate map and preparing and analyzing urban climate map related to the demonstration area. It was found that exact greenhouse gases emission quantity and absorption quantity can be calculated for each type of urban climatop by preparing urban climate map and the temperature is high in residential area, commercial area and industrial area and the emission quantity per unit area is high in the traffic area and industrial area. It seems that the influence of climate change can be presented for urban development by suggesting urban climate change for type of urban climatop and they can be utilized to save energy in urban area and to establish greenhouse gases reducing policy.

• Environmental and Resource Economics Review
• /
• v.29 no.1
• /
• pp.23-45
• /
• 2020

The rapid economic growth has brought tremendous pressure on the environment and caused severe air pollution in China. This study empirically examines causes of air pollution in China. Panel-corrected standard errors procedure (PCSE) was used to analyze major determinants of increasing or reducing emissions of sulfur dioxide (SO₂) and nitrogen oxides (NO_X) in 30 Chinese provinces. The estimation results show that SO₂ emission is mitigated as per capita regional GDP increases, but the relation between emission of NO_X and per capita regional GDP is found to have an inverse N-shaped curve, which implies that emission of NO_X is ultimately expected to decline with economic growth. As for increasing factors of air pollutants, electricity consumption is a significant common source of SO₂ and NO_X emissions. Moreover, the results show that increment of coal consumption significantly affects emission of SO₂ while increase of natural gas consumption reduce emission of SO₂. On the other side, investment in energy industry, and investment on treatment of waste gases are determinants of mitigating emissions of SO₂, but have no impact on NO_X. Consumption of diesel, truck ratio and number of vehicles increase emission of NO_X. Meanwhile, higher precipitation rate is a common determinant of mitigating emissions of SO₂ and NO_X. Policy implications are suggested in the conclusion.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.5
• /
• pp.436-445
• /
• 1986

As the second part of the studies on the utilization of polyunsaturated lipids in sardine oil as nutritional or medical supplement, the conditions of lipid extration and concentration, refining, and storage stability of EPA-condensed sardine oil were investigated. In extraction of lipids, solvent ratios of chloroform-methanol mixture(2:1 v/v) affected the final content of unsaturated lipid in extracted oil and recovery. Stepwise solvent fractionation method at various low temperatures was effective to concentrate polyenoic acids like EPA and DHA when acetone or acetone-methanol mixture, added in the ratio of 1:5 (v/v) was applied step by step to different temperatures at 0 to $-35^{\circ}C$. Addition of 1 to $5\%$ (v/v) of water to acetone was also benefit to raise EPA content but that resulted in reducing the yield of condensed oil from $65\%\;to\;28\%$. Concentration rate of polyenoic acids by solvent fractionation in lipid-actone solution (1:5, v/v) at 0 to $-30^{\circ}C$ seemed limited to $5{\sim}8\%$ in fatty acid composition depending on the initial content of those polyenoic acids in the sardine oil. During the extraction, concentration, and alkaline treatment, oxidation was rapidly induced but oxidation products could be thoroughly removed on the process of deceleration and peroxide elimination. To stabilize the reactive polyenoic acid condensed oil during the storage, stuffing nitrogen gas was essential to expel dissolved oxygen in oil or to seal the oil from open air, and the addition of antioxidative agents as BHA and tocopherols were greatly helpful to extend the storage life.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.1-9
• /
• 2014

UN-REDD (United Nations programme on Reducing Emissions from Deforestation and forest Degradation in Developing Countries) and AR-CDM (Afforestation/Reforestation-Clean Development Mechanism) is currently being emerged as one of important mechanism to reduce carbon dioxide in relation to the deforestation. Discussion on North Korea as UN-REDD/AR-CDM project target continues with a view to preventing deforestation and to securing CER(certified emission reduction) for South Korea. The forests in Mt. Baekdu are degraded, deforestation is occurred, nevertheless, portion of forested area is still high, where both REDD and AR-CDM investment potential are quite high. Accordingly, this study is intended to explore a simultaneous registration potential to UNREDD/AR-CDM for Mt. Baekdu although separate registration to UN-REDD or AR-CDM has already gained worldwide recognition as a typical method in the process of GHG (Greenhouse Gas) reduction project. The results indicate that selecting UN-REDD or AR-CDM in accordance with sub-watershed forest condition could capture 53.2% more carbon dioxide than REDD alone and 21.9% more than AR-CDM alone. It is anticipated that this research output could be used as a realistic evidence to introduce carbon sequestering project in accordance with sub-watershed forest condition.

• Clean Technology
• /
• v.23 no.1
• /
• pp.104-112
• /
• 2017

Hydrogen production via steam reforming of liquefaction liquid from marine algae over hydrothermal liquefaction was carried out at 873 ~ 1073 K with a commercial catalyst and Ni based $K_2Ti_xO_y$ added catalysts. Liquefaction liquid obtained by hydrothermal liquefaction (503 K, 2 h) was used as a reactant and comparison studies for catalytic activity over different catalysts (FCR-4-02, $Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, $Ni/K_2Ti_xO_y-ZrO_2/CeO_2$ and Ni/$K_2Ti_xO_y$-MgO), reaction temperature were performed. Experimental results showed Ni/$K_2Ti_xO_y$ based catalysts ($Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, Ni/$K_2Ti_xO_y-ZrO_2$/ $CeO_2$ and Ni/$K_2Ti_xO_y$-MgO) have a higher activity than commercial catalyst (FCR-4-02) and In particular, a product composition was different depending on support materials. An acidic support ($Al_2O_3$) and a basic support (MgO) led to a higher selectivity for CO while a neutral support ($SiO_2$) and a reducing support ($ZrO_2/CeO_2$) resulted in a higher $CO_2$ selectivity due to water gas shift reaction.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.616-620
• /
• 2005

The morphology and photoluminescence characteristics of green light emitting hexaaluminate phosphor particles prepared by high temperature spray pyrolysis from spray solution with and without ammonium dihydrogen phosphate flux were investigated. The particles prepared from spray solution without flux material had hollow morphology at preparation temperatures between $900^{\circ}C$ and $1,650^{\circ}C$. Ammonium dihydrogen phosphate flux added into spray solution enabled the formation of particles with spherical shape and filled morphology at preparation temperatures between $900^{\circ}C$ and $1,650^{\circ}C$. The hexaaluminate phosphor particles with magnetoplumbite structure were directly prepared by spray pyrolysis from spray solution with ammonium dihydrogen phosphate flux above $1,600^{\circ}C$. Ammonium dihydrogen phosphate flux was effective in improving the photoluminescence intensity of the phosphor particles at low preparation temperatures. The phosphor particles prepared from spray solution with and without flux material by spray pyrolysis under reducing atmosphere at $1,650^{\circ}C$ had comparable photoluminescence intensities with that of the phosphor particles optimized by post-treatment.