• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.3
• /
• pp.247-254
• /
• 2021

Acne vulgaris is a chronic inflammatory skin disease related to pilosebaceous unit. In acne lesions, hyperseborrhea, dysseborrhea, inflammatory event, and an imbalance in skin microflora, particularly an increase in Cutibacterium acnes (C. acnes) colonization comparing to other bacteria, have been observed. The objective of this study was to evaluate anti-acne effects of Artemisia annua extract (AAE) on antibacterial activity related to preservation of the balance in skin microbiome, inhibition of inflammation, and reduction of excessive sebum production. When C. acnes and Staphylococcus epidermidis (S. epidermidis) were co-cultured in the presence of AAE, the reduction of C. acnes growth by AAE was greater than that of S. epidermidis. In addition, when C. acnes was cultured in a medium containing AAE (C. acnes AAE), levels of cytokines such as interleukin-1β (IL-1β), tumor necrosis factor-α (TNF-α) and IL-6 and toll-like receptors-2 activity were decreased in comparison with C. acnes cultured in a medium without AAE (C. acnes CM). Moreover, AAE significantly inhibited excessive sebum production induced by palmitic acid. These results suggest that AAE, as a natural extract with various targets, can inhibit selective growth of C. acnes and inflammatory reactions derived from C. acnes, which are the main causes of acne, and consequently can be used as a substance to alleviate acne by reducing excessive sebum formation.

• Food Engineering Progress
• /
• v.13 no.1
• /
• pp.16-23
• /
• 2009

Onion juices supplemented with different concentrations of puffed red ginseng extract were fermented using Pediococcus pentosaceus KC-007 and their biologically functional properties were investigated. When onion juices were supplemented with puffed red ginseng extract at the concentration of 0.5, 1, 2, and 4% (v/v) each, viable cell number of lactic acid bacteria was the highest at 24 hr of fermentation in all samples. The titratable acidity increased as the fermentation proceeds irrespective of the added amount of red ginseng extract, and the pH of fermentation broth decreased until 36 hr of fermentation. The reducing sugar of fermentation broth decreased until 24 hr of fermentation and did not change thereafter. The electron donating ability and nitrite scavenging ability were highest when red ginseng extract was added at the concentration of more than 1% (w/v). The overall acceptance in sensory evaluation was the best when red ginseng extract was added at the concentration of 1% (w/v). From these results, it is confirmed that the optimum concentration of puffed red ginseng extract for the lactic acid fermentation of onion juice was 1% (w/v).

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.2
• /
• pp.12-20
• /
• 2021

Unsafe working environments slow down working speed in that it takes a lot of time to respond in case of an accident, greatly reducing the productivity of construction work. Therefore, proper safety management that does not impede the productivity of construction works is a very important factor for successful construction project. However especially in mega project, the mutual effects of safety management and productivity are complex. Therefore, this study establishes a causal model between safety management and productivity influencing factors based on effectiveness metrics, and analyzes the effect of increased site congestion due to excessive personnel input, irregular safety measures and inefficient change of work schedules. The result of this study, is expected to contribute to enhancing the competitiveness of the construction industry as the basis for establishing a safety management plan that can secure appropriate productivity.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.195-208
• /
• 2023

The nodular diaphragm wall (NDW) is a novel type of foundation with favorable engineering characteristics, which has already been utilized in high-rise buildings and high-speed railways. Compared to traditional diaphragm walls, the NDW offers significantly improved vertical bearing capacity due to the presence of nodular parts while reducing construction time and excavation work. Despite its potential, research on the vertical bearing characteristics of NDW requires further study, and the investigation and visualization of its displacement pattern and failure mode are scant. Meanwhile, the measurement of the force component acting on the nodular parts remains challenging. In this paper, the vertical bearing characteristics of NDW are studied in detail through the indoor model test, and the displacement and failure mode of the foundation is analyzed using particle image velocimetry (PIV) technology. The principles and methods for monitoring the force acting on the nodular parts are described in detail. The research results show that the nodular part plays an essential role in the bearing capacity of the NDW, and its maximum load-bearing ratio can reach 30.92%. The existence of the bottom nodular part contributes more to the bearing capacity of the foundation compared to the middle nodular part, and the use of both middle and bottom nodular parts increases the bearing capacity of the foundation by about 9~12% compared to a single nodular part of the NDW. The increase in the number of nodular parts cannot produce a simple superposition effect on the resistance born by the nodular parts since the nodular parts have an insignificant influence on the exertion and distribution of the skin friction of NDW. The existence of the nodular part changes the displacement field of the soil around NDW and increases the displacement influence range of the foundation to a certain extent. For NDWs with three different nodal arrangements, the failure modes of the foundations appear to be local shear failures. Overall, this study provides valuable insights into the performance and behavior of NDWs, which will aid in their effective utilization and further research in the field.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.10
• /
• pp.1477-1483
• /
• 2014

This study investigated the anti-obesity effects of African mango (Irvingia gabonesis, IGOB $131^{TM}$) extract in leptin-deficient obese mice. Experimental groups were treated with two different doses of IGOB $131^{TM}$ (1% and 2% in each AIN93G supplement) for 8 weeks. Treatment of obese mice with both low and high dose of IGOB $131^{TM}$ significantly reduced body weight gain by 10.9% and 13.3%, respectively, compared to control obese mice. Subcutaneous adipose tissue weight of mice was significantly reduced by 18% by low-dose and 23% by high-dose supplementation. This result was supported by micro-CT analysis around the abdominal regions of mice, indicating that the adipose tissue area and volume were significantly reduced by treatment with IGOB $131^{TM}$. Serum levels of triglycerides in the low- and high-dose groups were reduced by 36.5% and 43.8%, respectively, upon treatment with IGOB $131^{TM}$, whereas total cholesterol levels were reduced by 31.8% and 35.4%. Interestingly, the serum LDL level decreased upon treatment with IGOB $131^{TM}$ while the serum level of HDL dramatically increased upon high-dose treatment with IGOB $131^{TM}$, resulting in a significant reduction in the LDL to HDL ratio of 59.2%. These results were supported by the expression levels of enzymes and proteins related to lipid metabolism assessed by real-time PCR. There was a significant increase of in adiponectin expression as well as significant decreases in the expression of FAS, LPL, and lipid regulatory transcription factors such as PPAR-${\gamma}$, C/EBP, and SREBP upon both low- and high-dose IGOB $131^{TM}$ treatment. However, there was no statistical difference between low- and high-dose treatments. These results suggest that IGOB $131^{TM}$ is able to regulate the serum lipid profiles by reducing triglyceride and increasing HDL levels as well as regulate expression of lipid metabolic factors, resulting in reduction of a weight gain in leptin-deficient obese mice.

• Korean Journal of Microbiology
• /
• v.49 no.1
• /
• pp.71-77
• /
• 2013

This study was carried out to investigate the characteristics of Chungkookjang depending on different soybeans and fermentation temperatures using Bacillus amyloliquefaciens C2 isolated from homemade Chungkookjang. The highest protease activity was 854 U/g in yellow soybean Chungkookjang and 847 U/g in black soybean Chungkookjang at $35^{\circ}C$. The highest amylase activity was 3.87 U/g at $40^{\circ}C$ in yellow soybean Chungkookjang and 4.96 U/g at $45^{\circ}C$ in black soybean Chungkookjang. The highest reducing sugar content was 16.11 mg/g at $40^{\circ}C$ in yellow soybean Chungkookjang and 19.08 mg/g at $45^{\circ}C$ in black soybean Chungkookjang. The highest amino type nitrogen content was 420 mg%/g in yellow soybean Chungkookjang and 194 mg%/g in black soybean Chungkookjang at $40^{\circ}C$. The highest pH was 7.92 at $40^{\circ}C$ in yellow soybean Chungkookjang and 7.59 at $45^{\circ}C$ in black soybean Chungkookjang. The highest number of viable cell was 9.3 log CFU/g at $40^{\circ}C$ in yellow soybean Chungkookjang and at $35^{\circ}C$ in black soybean Chungkookjang. On the other hand, the lowest ammonia type nitrogen content was 225 mg%/g at $45^{\circ}C$ in yellow soybean Chungkookjang and 80 mg%/g at $40^{\circ}C$ in black soybean Chungkookjang. Yellow soybean Chungkookjang showed high protease activity, pH and amino type nitrogen, whereas black soybean Chungkookjang showed high amylase activity and reducing sugar.

• Economic and Environmental Geology
• /
• v.35 no.5
• /
• pp.379-393
• /
• 2002

Within the Boseong-Jangheung area of Korea, five hydrothermal gold (-silver) quartz vein deposits occur. They have the characteristic features as follows: the relatively gold-rich nature of e1ectrurns; the absence of Ag-Sb( -As) sulfosalt mineral; the massive and simple mineralogy of veins. They suggest that gold mineralization in this area is correlated with late Jurassic to Early Cretaceous, mesothermal-type gold deposits in Korea. Fluid inclusion data show that fluid inclusions in stage I quartz of the mine area homogenize over a wide temperature range of 200$^{\circ}$ to 460$^{\circ}$C with salinities of 0.0 to 13.8 equiv. wt. % NaCI. The homogenization temperature of fluid inclusions in stage II calcite of the mine area ranges from 150$^{\circ}$ to 254$^{\circ}$C with salinities of 1.2 to 7.9 equiv. wt. % NaCI. This indicates a cooling of the hydrothermal fluid with time towards the waning of hydrothermal activity. Evidence of fluid boiling including CO2 effervescence indicates that pressures during entrapment of auriferous fluids in this area range up to 770 bars. Calculated sulfur isotope composition of auriferous fluids in this mine area (${\delta}^34S$_{{\Sigma}S}$$\textperthousand$) indicates an igneous source of sulfur in auriferous hydrothermal fluids. Within the Sobaegsan Massif, two representative mesothermal-type gold mine areas (Youngdong and Boseong-Jangheung areas) occur. The ${\delta}^34S values of sulfide minerals from Youngdong area range from -6.6 to 2.3$\textperthousand$ (average=-1.4$\textperthousand$, N=66), and those from BoseongJangheung area range from -0.7 to 3.6$\textperthousand$ (average=1.6$\textperthousand$, N=39). These i)34S values of both areas are comparatively lower than those of most Korean metallic ore deposits (3 to 7TEX>$\textperthousand$). And, within the Sobaegsan Massif, the ${\delta}^34S values of Youngdong area are lower than those of Boseong-Jangheung area. It is inferred that the difference of ${\delta}^34S values within the Sobaegsan Massif can be caused by either of the following mechanisms: (1) the presence of at least two distinct reservoirs (both igneous, with ${\delta}^34S values of < -6 $\textperthousand$ and 2$\pm$2 %0) for Jurassic mesothermal-type gold deposits in both areas; (2) different degrees of the mixing (assimilation) of 32S-enriched sulfur (possibly sulfur in Precambrian pelitic basement rocks) during the generation and/or subsequent ascent of magma; and/or (3) different degrees of the oxidation of an H2S-rich, magmatically derived sulfur source ${\delta}^34S = 2$\pm$2$\textperthousand$) during the ascent to mineralization sites. According to the observed differences in ore mineralogy (especially, iron-bearing ore minerals) and fluid inclusions of quartz from the mesothermal-type deposits in both areas, we conclude that pyrrhotite-rich, mesothermal-type deposits in the Youngdong area formed from higher temperatures and more reducing fluids than did pyrite(-arsenopyrite)-rich mesothermal-type deposits in the Boseong-Jangheung area. Therefore, we prefer the third mechanism than others because the ${\delta}^34S values of the Precambrian gneisses and Paleozoic sedimentary rocks occurring in both areas were not known to the present. In future, in order to elucidate the provenance of ore sulfur more systematically, we need to determine ${\delta}^34S values of the Precambrian metamorphic rocks and Paleozoic sedimentary rocks consisting the basement of the Korean Peninsula including the Sobaegsan Massif.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.10-10
• /
• 2017

Rice consumption has been continuously decreasing as the eating habits of Koreans have become westernized and diversified. The per capita annual rice consumption in Korea has dropped sharply from 136.4 kg in 1970 to 61.9 kg in 2016. The Korean government, therefore, has been trying to promote rice consumption by invigorating the processed food industry using rice flour. To facilitate the market for processed rice foods, it is essential to develop proper milling technology in terms of flour particle size and damaged starch content to produce high quality rice flour at competitive cost. Dry milling and wet milling are the two major processes used to produce rice flour. Although the dry milling process is relatively simple with a lower production cost, damaged starch content increases because of the high grain hardness of rice. In wet milling, the quality of rice flour is improved by reducing flour particle size as well as damaged starch content through soaking procedures. However, the production costs are high because of the additional expenses associated with the disposal of waste water, sterilization and drying of the wet flour. Recently developed technologies such as jet milling and cryogenic milling also require expensive investment and production. Therefore, developing new rice cultivars with dry milling adaptability as well as good processing properties is an important goal of rice breeding in Korea. 'Suweon 542' is a floury endosperm mutant line derived from sodium azide treatment on a high-yield, early maturing, and non-glutinous japonica rice cultivar, 'Namil'. Compared with the wild type, after dry milling process, the grain hardness of 'Suweon 542' was significantly lower because of its round and loosely packed starch granules. Also, the flour of 'Suweon 542' had significantly smaller particles and less damaged starch than 'Namil' and other rice cultivars and its particle size distribution was similar to a commercial wheat cultivar. Recently, through collaborations with nine universities and food companies, a total of 21 kinds of processed prototypes, using the dry milling flour of 'Suweon 542', were evaluated. In the production of major rice processing products, there was no significant quality difference between the flours prepared by wet milling and dry milling. Although the amount of water added to the dough was slightly increased, it was confirmed that the recipe applying the wet flour could be used without significant change. To efficiently transfer the floury endosperm characteristics of 'Suweon 542' to other commercial rice cultivars, it is essential to develop DNA marker tightly linked to the target gene. Association analysis using 70 genome-wide SSR markers and 94 F2 plants derived from 'Suweon 542'/'Milyang 23' showed that markers on chromosome 5 explained a large portion of the variation in floury grains percentage (FGP). Further analysis with an increased number of SSR markers revealed that the floury endosperm of 'Suweon 542' was directed by a major recessive locus, flo7(t), located in the 19.33-19.86 Mbp region of chromosome 5, with RM18639 explaining 92.2% of FGP variation in the F2 population. Through further physical mapping, a co-segregate and co-dominant DNA marker with the locus, flo7(t) was successfully developed, by which, thereby, breeding efficiency of rice cultivars having proper dry milling adaptability with high yield potential or useful functional materials would be improved. 'Suweon 542' maintained the early maturity of the wild type, Namil, which can be used in rice-wheat double cropping systems in Korea not only for improved arable land but also for sharing flour production facilities. In addition to the high susceptibility against major rice diseases, nevertheless, another possible drawback of 'Suweon 542' is the high rate of viviparous under prolonged rainfall during the harvesting season. To overcome susceptibility and vivipary of 'Suweon 542', the progeny lines, derived from the crosses 'Suweon 542' and 'Jopyeong', an early maturing rice cultivar with multiple resistance against rice blast, bacterial blight, and rice strip virus, and 'Heugjinju', a anthocyanin pigment containing black rice cultivar, were intensively evaluated. As the outputs, three dry milling suitable rice elite lines, 'Jeonju614', 'Jeonju615', and 'Jeonju616' were developed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4373-4378
• /
• 2012

Introduction: Hypercalcemia is mainly caused by bone resorption due to either secretion of cytokines including parathyroid hormone-related protein (PTHrP) or bone metastases. However, hypercalcemia may occur in patients with or without bone metastases. The present study aimed to describe the effect of chemotherapy treatment, regimens and doses on calcium levels among breast and lung cancer patients with hypercalcemia. Methods: We carried a review of medical records of breast and lung cancer patients hospitalized in years 2003 and 2009 at Penang General Hospital, a public tertiary care center in Penang Island, north of Malaysia. Patients with hypercalcemia (defined as a calcium level above 10.5 mg/dl) at the time of cancer diagnosis or during cancer treatment had their medical history abstracted, including presence of metastasis, chemotherapy types and doses, calcium levels throughout cancer treatment, and other co-morbidity. The mean calcium levels at first hospitalization before chemotherapy were compared with calcium levels at the end of or at the latest chemotherapy treatment. Statistical analysis was conducted using the Chi-square test for categorical data, logistic regression test for categorical variables, and Spearman correlation test, linear regression and the paired sample t tests for continuous data. Results: Of a total 1,023 of breast cancer and 814 lung cancer patients identified, 292 had hypercalcemia at first hospitalization or during cancer treatment (174 breast and 118 lung cancer patients). About a quarter of these patients had advanced stage cancers: 26.4% had mild hypercalcemia (10.5-11.9 mg/dl), 55.5% had moderate (12-12.9 mg/dl), and 18.2% severe hypercalcemia (13-13.9; 14-16 mg/dl). Chemotherapy lowered calcium levels significantly both in breast and lung cancer patients with hypercalcemia; in particular with chemotherapy type 5-flurouracil+epirubicin+cyclophosphamide (FEC) for breast cancer, and gemcitabine+cisplatin in lung cancer. Conclusion: Chemotherapy decreases calcium levels in breast and lung cancer cases with hypercalcemia at cancer diagnosis, probably by reducing PTHrP levels.

• Journal of Distribution Science
• /
• v.11 no.8
• /
• pp.15-23
• /
• 2013

Purpose - This is a case study aimed at finding a solution for improving the pallet loading efficiency in the process of delivering products through a transshipment using the T-11 and T-12 pallet systems. The study proposes a solution by demonstrating the case of a certain manufacturer A, who aims to reduce the logistics cost by using packaging sizes that are commonly applicable and can improve the compatibility between the T-11 pallet system, designated as the standard pallet in Korea, and the T-12 pallet system, which is commonly used in other foreign countries. The use of common sizes increases compatibility among the two systems and reduces both logistics and environmental costs. Thus, this case study calculates the quantitative benefits of applying common packaging sizes to improve the compatibility between the T-11 and T-12 pallet systems. These systems are considered to be the most important and widely used transportation systems in the global logistics industry. Research design, data, and methodology - This study examined manufacturer A's representative product and delivery system and assessed how manufacturer A was affected by the use of incompatible packaging sizes in the T-11 (1100 mm×1100 mm) and T-12 (1200mm×1000 mm) pallet systems, which were specified in the KS T 1002 standard. In addition, this study analyzed the impact of these packaging sizes on A's logistics cost. The TOPS program (Total Packaging System) was used to simulate pallet loading efficiency,and the main parameter studied was volume, as calculated from length, width, and height. Results - When the sizes of secondary packaging were not compatible across the T-11 and T-12 pallet systems, a reduction in loading efficiency was observed, leading to an increase in logistics cost during transshipment. Such low loading efficiencies led to a further loss of efficiency in transportation, storage and unloading. This may have a possible environmental impact with high social expenses, such as increased CO₂ emissions. Hence, this study proposed that the KS T 1002 standard be amended to include 21 packaging sizes, including 7 sizes of the 600 mm×500 mm category, which are compatible with both the T-11 and T-12 pallet systems. Conclusions - This study found that the 69 standard sizes under the T-11 pallet system and the 40 standard sizes under the T-12 system in the KS T 1002 standard can be simplified and reduced to 21 mutually compatible packaging sizes, enabling logistics standardization and reducing national-level logistics costs. If the government pays attention to this study and considers the standardization of common sizes for the T-11 and T-12 pallet systems and amends the KS T 1002 standard, this study will deliver practical value to the global logistics industry, apart from being of academic significance.