• Korean Journal of Food Science and Technology
• /
• v.21 no.4
• /
• pp.575-582
• /
• 1989

An investigation was carried out to improve the quality and yield of barley tea(water extracts) by modifying the roasting method. The modified methods employed were crushing the barley into 4-10 parts and soaking in water at room temperature for 20 minutes followed by roasting (light brown or dark brown) at $250^{\circ}C$ before boiling with water. The varieties of barley used for this study were Ol-bori(with hulls) and Youngsan-bori(without hulls) and the qualities measured were the physical, chemical and sensory characteristics of roasted barley and its extracts. The results showed that the higher solid yields in barley tea was obtained with an increase in soaking and roasting time. The solid yields increased rapidly with extraction time in boiling water until 30 minutes and then slowed down thereafter. However the intrinsic viscosity of barley tea was reduced by increase in soaking and roasting time. The color of barley tea expressed as Hunter L, a, b values showed that lower L value and higher a and b values were measured for those prepared without soaking and with more extensive roasting. Organoleptic evaluation clearly showed that the sensory quality of barley tea was significantly improved in intensity of odor and taste by crushing, soaking and dark brown roasting.

• Korean Journal of Food Science and Technology
• /
• v.39 no.6
• /
• pp.652-657
• /
• 2007

This study was performed to evaluate the physicochemical and quality characteristics of bread with Enteromorpha intenstinalis added. In order to compare the physical and organoleptic properties, 1 to 4% of E. intenstinalis powder was mixed with the flour. Among the physical characteristics of the dough, the absorption ratio in the farinogram and the degree of attenuation increased with increasing amounts of E. intenstinalis powder, whereas the development time, dough stability, the degree of extension, the degree of resistance, and R/E became reduced. In the amylogram, there was no difference in the gelatinization starting temperature among the samples, but the maximum viscosity gradually increased according to increasing amounts of E. intenstinalis powder. Also, a sensory evaluation was carried out in terms of acceptability (color, flavor, moistness, tenderness, mouth feel, and overall acceptability). Taken together, the 2% treatment showed the highest evaluation values, as compared to the other treatments.

• Korean Journal of Food Science and Technology
• /
• v.40 no.1
• /
• pp.15-20
• /
• 2008

This study investigated the antioxidant content and oxidative properties of roasted sesame oil during manufacturing and storage at $25^{\circ}C$ in the dark for 18 months. The manufacturing steps included pressing of the roasted sesame seeds, and then three filtering steps. Filtering decreased the oil viscosity, but increased free fatty acid content. The peroxide value (POV) was not affected by filtering. Sesamin, sesamolin, and tocopherol levels were significantly higher in the $3^{rd}$ filtered oil as compared to the other oils; however, sesamol content was reduced. The roasted sesame oil oxidized slowly during storage at $25^{\circ}C$ in the dark, and there was no POV change up to 9 months of storage. The levels of sesamol, sesamin, sesamolin, and tocopherols in the oil decreased with storage time, and the tocopherol decomposition rate (-3.04%/month) was higher than that of total lignan compounds (-1.06%/month). Therefore, these results suggest that tocopherols have priority over lignan compounds in performing as antioxidants in roasted sesame oil during storage.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.486-495
• /
• 2001

Degradable poly(butylene succinate) (PBS)/poly(TEX>${\varepsilon}$-caprolactone) (PCL) copolyesters were prepared by using transesterification between poly(butylene succinate) and poly(TEX>${\varepsilon}$-caprolactone). The thermal and mechanical properties of copolyesters were investigated using differential scanning calorimetry and tensile testing. Interchange reaction between PBS and PCL molecules could be identified from proton NMR spectra. The reduced viscosity of the PBS/PCL copolyesters increased with reaction time except for a series of PBS/PCL (50/50 wt%) copolyesters. For all the compositions, the melting point and crystallization temperature of high-$T_m$ component (PBS) decreased as reaction time increased. From the results of tensile testing, it was found that stress and strain at break of the PBS/PCL copolymers containing less than 40 wt% PCL improved as compared to those of pure PBS, but at 50 wt% PCL stress at break of PBS/PCL copolymers was lowered due to decrease of crystallinity. On the other hand, Young's moduli of all the copolyesters decreased with both reaction time and PCL content.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.404-413
• /
• 1995

System parameters (extrusion temperature, extrusion pressure, specific mechanical energy, mean residence time) were analysed on three different screw configurations during twin-screw extrusion of wheat bran. Experiments were conducted over a screw speed of $280{\sim}380\;rpm$, feed rate of $22{\sim}38\;kg/hr$ and moisture content of $17{\sim}33%$ using screws assembled with 3, 4, and 5 reverse screw elements (RSE) adjacent to the heating zone of the barrel. Extrusion temperature increased with increasing RSE but it decreased with increasing feed rate and moisture content. Decreasing the filling ratio of the screw resulted in a lower extrusion pressure, and increasing the length of the RSE gave similar results due to the higher temperature and lower viscosity of melted dough. It was also observed that increasing the feed rate and decreasing moisture content resulted in the reduced extrusion pressure. Specific mechanical energy (SME) decreased when the feed rate and moisture content increased, and SME increased when using RSE posses from 3 to 5. Screw configuration posses with 4 RSE yielded the longest RT, and the smaller the die hole, the higher the RT. In contrast, RT decreased when the feed rate increased. With increasing moisture content RT for 3 RSE increased, but that for 4 and 5 RSE decreased.

• Applied Biological Chemistry
• /
• v.29 no.3
• /
• pp.266-272
• /
• 1986

The contents of water soluble ${\beta}-glucan$ were $1.4{\sim}4.0%$ in grains of 4 recommended varieties, and $0.3{\sim}0.6%$ in their malt. The ${\beta}-glucan$ content was subject to environmental factors such as cultivating region and nitrogen fertilizer level. The ${\beta}-glucan$ content of grains was positively correlated with the viscosity, but negatively with the protein and total gum contents. The ${\beta}-glucanase$ activity was $11.0{\sim}20.0$ sec as the reduced flow time in malt of 4 recommended varieties and was also subject to environmental factors. ${\beta}-Glucanase$ activity showed the highest level after the 6th day during malting. The ${\beta}-glucanase$ activity in malt was positively correlated with malt extract, but negatively with the residual ${\beta}-glucan$ content. The protein content in malt was negatively correlated with malt extract, but positively with the diastatic power.

• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.99-107
• /
• 2011

This study is to performed to find the optimum mix proportion of the high strength and self compacting concrete for the above-ground LNG storage tank construction and field application. If LNG storage tank wall thicknesscan be reduced, the construction cost and quality can be improved by using self-compacting high strength concrete with compressive strength 60~80 MPa. For this purpose, low heat cement (Type IV) and class F fly ash are used in concrete mix to control hydration heat, flowability, and viscosity. Mix design variables of unit water, fly ash replacement ratio, water-binder ratio, and fine aggregate ratio are selected and tested for material properties and manufacturing cost of the concrete. Also, fly ash replacement ratio is considered using confined water ratio test. The test results showed that the optimum mix proportion of the self-compacting high strength concrete characteristics are as follows. 1) In case of the concrete with specified compressive strength of 60 MPa, the optimum mix proportion is fly ash replacement ratio of 20% and water- binder ratio of 27~30%. 2) In case of the concrete with the strength of 80 MPa, the optimum mix proportion is fly ash replacement ratio of 10% and water-binder ratio 25%. But unit water and fine aggregate ratio are 165 $kg/m^3$ and $51{\pm}2%$, respectively, regardless of the traget concrete compressive strength range. Also, test results showed that concrete manufacturing cost of 60 MPa and 80 MPa concrete require additional costs of 14~22% and 33%, respectively, compared to the manufacturing cost of 40 MPa concrete. Therefore, application of the self-compacting high strength concrete has proven to be economical in the perspective of the material cost, quality control, and site management.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.6
• /
• pp.989-998
• /
• 2016

Acidic endo-polygalacturonases are the major part of pectinase preparations and extensively applied in the clarification of fruits juice, vegetables extracts, and wines. However, most of the reported fungal endo-polygalacturonases are active and stable under narrow pH range and low temperatures. In this study, an acidic endo-polygalacturonase (EPG4) was purified and characterized from a mutant strain of Penicillium oxalicum. The N-terminal amino acid sequence of EPG4 (ATTCTFSGSNGAASASKSQT) was different from those of reported endo-polygalacturonases. EPG4 displayed optimal pH and temperature at 5.0 and 60-70℃ towards polygalacturonic acid (PGA), respectively, and was notably stable at pH 2.2-7.0. When tested against pectins, EPG4 showed enzyme activity over a broad acidic pH range (>15.0% activity at pH 2.2-6.0 towards citrus pectin; and >26.6% activity at pH 2.2-7.0 towards apple pectin). The K_m and V_max values were determined as 1.27 mg/ml and 5,504.6 U/mg, respectively. The enzyme hydrolyzed PGA in endo-manner, releasing oligo-galacturonates from PGA, as determined by TLC. Addition of EPG4 (3.6 U/ml) significantly reduced the viscosity (by 42.4%) and increased the light transmittance (by 29.5%) of the papaya pulp, and increased the recovery (by 24.4%) of the papaya extraction. All of these properties make the enzyme a potential application in the beverage industry.

• Korean journal of food and cookery science
• /
• v.22 no.5 s.95
• /
• pp.666-680
• /
• 2006

To obtain basic data for the utilization of saltwort (Salicornia herbacea L.) as a functional ingredient in steamed foam cake, the optimum component ratios for major raw ingredients (saltwort, salt, and wheat flour) as independent variables that affect the product quality were scientifically determined using RSM (response surface methodology) technique. A three-factor and five-level rotational central composite design was used for treatment arrangement. The complete design consisted of 16 experimental points. The three independent variables selected for the RSM experiment were amounts of saltwort (X$_1$, 5${\sim}$25 g), salt (X$_2$, 0${\sim}$10 g), and wheat flour (X$_3$, 470${\sim}$530 g). The optimum responses in specific gravity of the batter and volume, color, texture, and sensory evaluation result of the cake were obtained. The specific gravity and viscosity of the batter at p<0.01 was verified from the regression curve. The characteristic of the batter was influenced by all independent variables, but was extremely dependent on the amount of saltwort ordinary points of the surface responses from the batter formed the minimum points for specific gravities of the batter while viscosities of the batter appeared with the saddle points. Analysis of the response indicated that the amount of saltwort was the most influential factor over the physical properties of the cake, among the dependent variables. Ordinary points of the surface responses from the cake formed the maximum points for loaf volume, hardness gumminess, and chewiness, while Hunter colorimetric parameters appeared with the saddle points. The result indicated that level of the saltwort deviating more or less from the optimal amount decreased the volume and increased the specific gravity with less tender product. Ordinary points of the surface responses of the sensory evaluation scores from the cake formed the maximum points for appearance, flavor, softness, and overall acceptability, while color values appeared with the saddle points. The result also indicated that the level of the saltwort deviating more or less from the optimal amount reduced the preference for the product. Integration of the optimum responses common to all dependent variables that overlapped all the contour maps finally indicated that the combination of 8.3${\sim}$13.8 g saltwort, 2.5${\sim}$6.6 g salt, and 486.5${\sim}$511.5 g wheat flour under the selected preparation recipe optimized the physical and sensory properties in the teamed foam cakes. Practical preparation of the product with median amounts of the ingredients, i.e., 11.0 g saltwort, 4.6 g salt, and 499.0 g wheat flour resulted in similar qualities to the predicted responses. In conclusion, these study results indicated that preparation of steamed foam cake with added saltwort ingredient could potentially produce a more nutritious product with less salt. Further research is required to acquire the optimum levels for sub-ingredients to improve the product quality.

• Current Research on Agriculture and Life Sciences
• /
• v.30 no.2
• /
• pp.82-89
• /
• 2012

Commercial powdered soups, such as potato soup(PS), corn soup(CS), and chicken-herb soup(CHS), were gamma-irradiated at 0, 1, 5 and 10 kGy and subjected to physicochemical evaluation and identification trials by analyzing photostimulated luminescence(PSL), electron spin resonance(ESR), and thermoluminescence(TL). The changes in moisture content and pH of soup samples were negligible upon irradiation. The Hunter's color determinations showed that lightness (L value) decreased and yellowness (b value) increased as the irradiation dose increased in PS sample. The viscosity of irradiated samples was reduced in the order of PS, CS and CHS. The analyses of PSL, ESR and TL were applicable to the identification of irradiated powdered-soups at more than 1 kGy by detecting PSL photon counts/60 sec(over 5000), radiation-induced multicomponents-ESR signal, and typical TL glow curve at $150-250^{\circ}C$.