• ETRI Journal
• /
• 제35권2호
• /
• pp.253-258
• /
• 2013

We propose and demonstrate an efficient power-saving optical network unit (ONU) based on upstream traffic monitoring for 10-Gb/s wavelength division multiplexed passive optical networks (WDM-PONs). The power-saving mode controller uses a ${\mu}$-processor and traffic monitoring modules followed by the proposed power-saving processes to operate the sleep mode ONU. The power consumption of the ONU is effectively reduced from 19.3 W to 6.4 W when no traffic from the users is detected. In addition, we design a power-saving mechanism based on a cyclic sleep mode operation to allow a connectivity check between the optical line terminal and ONU. Our calculation results show that the WDM-PON ONU reduces the power consumption by around 60% using the proposed mechanism.

• 한국해안해양공학회지
• /
• 제5권3호
• /
• pp.240-249
• /
• 1993

여러 종류의 다양한 외력조건에 의해서 형성되는 부유사농도에 대한 종합적 해석을 수행하고, 부유사양 Flux의 산정에 있어서 매우 중요한 역할을 차지하는 확산계수와 기준점농도에 관한 실용적 평가식을 제안하였다. 부유사농도의 연직확산계수는 사연형상을 고려한 저부마찰속도 및 조도요소를 사용하여 계산되는 과동점성계수에 대해 명확한 비예관계가 성립됨이 확인되었다. 또한, 흐름이 파에 부가되었을 경우 발생하는 기준점농도의 저하현상은 파와 흐름의 공존영역에서 형성되는 사연의 비대칭성에 기인됨이 확인되었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.332-337
• /
• 2001

The objective of research is to clarify the interaction between dislocations and precipitates during high temperature creep deformation behaviors of high Mn austenitic steels. After measuring the internal stress in minimum creep rate at 873K, a transmission electron microscope (TEM) observation was performed to investigate the interaction between dislocations and precipitates during high temperature creep deformation. The band width of effective stress and internal stress increased when the nitride precipitates distribute more densely. Fine nitrides disturbed the dislocation movement with pinning the dislocations and perfect dislocations were separated into Shockley partial dislocations by fine nitrides. Coarse nitrides disturbed the dislocation movement with climb mechanism.

• 전자공학회논문지B
• /
• 제30B권11호
• /
• pp.11-16
• /
• 1993

VLIW architecture capable of testing multiple conditions in a cycle must support an efficient mechanism for multi-way branches. This paper proposes a mechanism to speed up the execution of multi-way branches and an efficient memory packing method of instructions, which reduced the wasted memory space. Also, we develops a new compiler technique which can transform program segments that are not applied to multi-way branches into ones that are applied to multi-way branches. The benefits gained by the transformation are to reduce branch penalty and to increase instruction-level parallelism.

• 한국안전학회지
• /
• 제7권2호
• /
• pp.42-46
• /
• 1992

The submersible motor pump could have much more merits than the general pump such as higher exhaustion head, narrower installahon place, lower noise due to operating in the water and so on. But, so far, hydraulic mechanism of the axial thrust at impeller was not analysed quantitatively and so it is very difficult to solve the occuring problems. Therefore, in this study, we aimed to minimize the axial thrust acting on thrust bearing of submersible motor pump through the analysis of hydraulic mechanism of thrust and design rivision of impeller. Test carried out on the pump with an impeller 92mm in diameter, 6 balacing holes 10mm in diameter, showed the thrust is reduced by about 86％ at the normal operating point.

• 대한의생명과학회지
• /
• 제15권1호
• /
• pp.73-80
• /
• 2009

Bloodstream infections (BSI) are caused by planktonic microorganisms, sometimes leading to serious infections such as bacteremia and sepsis. BSI occurs more frequently to the patients wearing the central venous catheter (CVC). The ciprofloxacin-incorporated CVC (CFX-CVC) has been reported previously to possess antimicrobial activity. In this study, the antibacterial activity of CFX-CVC and its mechanism against planktonic BSI cells were explored by using the shake flask test and by examining the release rate of 260 nm-absorbing substances from the bacterial cells indicative of the membrane damage of the bacterial cells. CFX-CVC reduced more than 99.9% of the viable planktonic BSI cells demonstrating its potent antibacterial activity. It provoked bacteriolysis causing leakage of a large amount of 260 nm-absorbing materials from the planktonic bacterial cells like S. aureus and E. coli. These results provide evidence that the antibacterial activity of CFX-CVC came from the inhibition of the stability of the planktonic bacterial cells.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 춘계 학술대회논문집
• /
• pp.115-120
• /
• 2002

A two-dimensional direct numerical simulations was peformed to investigate the flame structure of $CH_4/N_2$-Air counterflow nonpremixed flame interacting with a single vortex. The detailed transport properties and a modified 16-step augmented reduced mechanism based on Miller and Bowman's detailed reaction mechanism were adopted in this calculation. To quantify the strain on flame induced by a vortex, a scalar dissipation rate (SDR) is introduced. Results show that the fuel- and air-side vortex cause an unsteady extinction. In this case, the flame interacting with a vortex is extinguished in much larger SDR than steady flame. It was also found that air- side vortex extinguishes a flame more rapidly than fuel -side vortex.

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.361-370
• /
• 1989

Mullite powders were synthesized from the common solution of aluminum sulfate and sodium silicate solutions by the emulsion-hot kerosene technique. The reaction temperature and mechanism for mullitization and the characteristics of synthesized mullite powders were investigated. The effect of Na components introduced from sodium silicate solution on the physical property and microstructure of sintered mullite was also examined. It was proved that mullites were formed at 75$0^{\circ}C$ through the reaction mechanism of Na2O.2.2SiO2＋3.3Al2(SO4)3longrightarrow1.1(3Al2O3.2SiO2)＋Na2SO4＋8.9SO3. Synthetic mullite powders consisted of the compositiion of 3Al2O3.2SiO2 and showed highly agglomeration of hollow spherical particles of 1${\mu}{\textrm}{m}$ diameter. The density and fracture toughness of sintered mullites were somewhat reduced because of the effect of a very small amount of residual Na components.

• 한국정보처리학회논문지
• /
• 제6권3호
• /
• pp.553-561
• /
• 1999

The facility of schema evolution is necessary in object-oriented database applications. There exist several versions of schema and instances created under different versions of the schema concurrently in the database. This base proposes a mechanism for supporting accessing instances regardless of versions of the schema in schema evolution environments in object oriented databases. There is trade-off between the flexibility of schema modification operations and the system overhead for supporting such schema modifications. Access handling routines are provided to the undefined attributes in each version of the class. Access handling routines are also defined for each pair of semantics rather than defining backdate/update functions for each pair of versions of a class. Thus, this mechanism supports the change of semantics with reduced user and system overhead.

• 한국분말재료학회지
• /
• 제8권1호
• /
• pp.61-69
• /
• 2001

Spark-Plasma Sintering(SPS) is one of the new sintering methods which takes advantages both inconventional pressure sintering and electric current sintering. It is known that SPS is very effective for the densification of hard-to-sinter materials like refractory metals, intermetallic compounds, glass and ceramics without grain growth. However, a clear explanation for sintering mechanism and an experimental evidence for the formation of weak plasma during SPS are not given yet. In this study, fundamental study on sintering behavior and mechanism of SPS was investiged. For this study, various spherical Fe powders were prepared such as as-received, as-reduced, and as-oxidized and then sintered by SPS facility. In order to confirm the surface cleaning effect during SPS neck region and fracture surface of sintered body was observed and analyzed by SEM/EPMA. Densification behavior was analyzed from the data of deflection along the pressure axis. Some specimens were additionally produced by Hot Pressing and the results were compared with those of SPS.