• 한국전산구조공학회논문집
• /
• 제26권4호
• /
• pp.255-262
• /
• 2013

본 논문에서는 아이소-지오메트릭 기법을 기반으로 민들린 후판에 대한 형상 설계민감도 해석법을 제시하였다. 아이소-지오메트릭 기법은 정확한 기하학적 형상의 표현, 요소 사이의 높은 연속성 등 바람직한 강점들을 가지고 있으며 궁극적으로는 해석해로의 빠른 수렴성과 정확한 설계민감도를 제공한다. 선형 형상함수를 사용하는 유한요소법과는 달리 아이소-지오메트릭 기법에서는 높은 차수의 NURBS 기저함수를 활용하여 CAD 형상의 법선벡터와 곡률을 정확하게 고려한다. 전단 잠김(Shear locking) 현상을 극복하기 위해서 선택적 감소적분(Selective reduced integration) 기법을 사용하였다. 이 간단한 방법은 복잡한 정식화 과정 없이 정확한 아이소-지오메트릭 형상 설계민감도 해석을 수행한다. 굽힘 문제에 대한 수치예제를 통하여 제안된 아이소-지오메트릭 해석과 유한요소 해석을 비교하였으며, 유한차분 설계민감도와 비교하여 아이소-지오메트릭 형상 설계민감도는 매우 정확함을 확인하였다.

• 전자공학회논문지SC
• /
• 제48권5호
• /
• pp.59-65
• /
• 2011

본 논문에서는 폴리토픽 불확실성을 가지는 이산시간 변수종속 특이시스템에 대한 저차(low order)의 변수종속 차수축소 강인 $H_{\infty}$ 필터 설계기법을 제안한다. 먼저, 변수종속 특이시스템에 대한 유계 실수정리(bounded real lemma)를 변수종속 리아푸노프 (Lyapunov) 함수로부터 유도한다. 유계 실수정리로부터 폴리토픽 기법과 새로운 차수축소 기법을 이용하여 저차의 강인 $H_{\infty}$ 필터 설계방법을 볼록최적화가 가능한 선형행렬부등식 접근방법을 이용하여 제시한다. 따라서 제안하는 변수종속 차수축소 강인 $H_{\infty}$ 필터 설계방법은 미리 정한 차수의 $H_{\infty}$ 필터를 제공한다. 수치예제를 통하여 제시한 저차의 필터 설계방법의 타당성을 보인다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권1호
• /
• pp.1-6
• /
• 1990

The objective of this experiment was to compare the effect of pH-regulated alkaline hydrogen peroxide (AHP) treatment of rice straw with those of sodium hydroxide (NaOH) and anhydrous ammonia ($NH_3$) treatments on in sacco digestivility. Three non-lactating ruminally cannulated Holstein cows were fed a diet containing 90% forage and 10% concentrate on a dry matter (DM) basis. The AHP treatment significantly (p<0.05) reduced acid detergent lignin content of the straw, resulting in significant (p<0.05) increase of neutral detergent fiber (NDF), acid detergent fiber (ADF) and cellulose concentrations. Disappearance rates of DM and NDF of the straw significantly (p<0.05) increased at the incubation time of 24 h. On the other hand, those of ADF and cellulose were significantly (p<0.05) higher at the incubation time of 12 h than those of the others. The effective degradability of DM(EDDM), NDF(EDNDF), ADF(EDADF) and cellulose (EDCE) were determined using in sacco nylon bag technique on the basis of 0.05/h solid outflow rate. The greater differences (p<0.05) of EDDM, EDNDF, EDADF and EDCE were found between AHP treated straw and the others. In general, AHP treatment of the straw recorded higher digestion coefficients than untreated straw as well as NaOH and $NH_3$ treated straws. The results of this study demonstrate that AHP treatment can be used as a effective method for improving the nutritive value of rice straw for ruminants.

• PNF and Movement
• /
• 제16권1호
• /
• pp.85-92
• /
• 2018

Purpose: We sought to examine whether using the rhythmic stabilization (RS) technique before proprioceptive neuromuscular facilitation (PNF) wrist taping affected pain and grip strength in patients with wrist pain to provide a basis for the application of PNF taping. Methods: The study consisted of 41 badminton enthusiasts (aged 20-40 years) who reported discomfort and pain due to overuse of their wrists. The subjects were randomly assigned to an experimental group (n=20) or a control group (n=21). In the experimental group, PNF wrist taping was applied after application of the PNF RS technique, and PNF wrist taping was applied after stretching in the control group. The tape was applied five times a week for 3 weeks. Pain was measured using the visual analog scale (VAS). Grip strength was measured using a dynamometer. The paired t-test was performed to compare grip strength and pain within the groups before and after the intervention. Covariance analysis was conducted to compare differences between the experimental group and control group. The level of significance was set as ${\alpha}=0.05$. Results: Within-group changes in grip strength and VAS were significantly different in the control group and experimental group (p<0.01). Grip strength and VAS showed more improvement in the experimental group than in the control group (p<0.01). Conclusion: PNF wrist taping after stretching and the PNF RS technique both significantly reduced pain and improved grip strength in club badminton players with wrist pain. These improvements were significantly greater in the experimental group in which the PNF RS technique was applied. The results suggest that PNF may be considered useful to improve grip strength and reduce wrist pain.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권2호
• /
• pp.727-746
• /
• 2018

The hash function RIPEMD-160 is a worldwide ISO/IEC standard and the hash function HAS-160 is the Korean hash standard and is widely used in Korea. On the basis of differential meet-in-the-middle attack and biclique technique, a preimage attack on 34-step RIPEMD-160 with message padding and a pseudo-preimage attack on 71-step HAS-160 without message padding are proposed. The former is the first preimage attack from the first step, the latter increases the best pseudo-preimage attack from the first step by 5 steps. Furthermore, we locate the linear spaces in another message words and exchange the bicliques construction process and the mask vector search process. A preimage attack on 35-step RIPEMD-160 and a preimage attack on 71-step HAS-160 are presented. Both of the attacks are from the intermediate step and satisfy the message padding. They improve the best preimage attacks from the intermediate step on step-reduced RIPEMD-160 and HAS-160 by 4 and 3 steps respectively. As far as we know, they are the best preimage and pseudo-preimage attacks on step-reduced RIPEMD-160 and HAS-160 respectively in terms of number of steps.

• Smart Structures and Systems
• /
• 제10권4_5호
• /
• pp.427-442
• /
• 2012

An effective approach for updating finite element model is presented which can provide reliable estimates for structural updating parameters from identified operational modal data. On the basis of the dynamic perturbation method, an exact relationship between the perturbation of structural parameters such as stiffness change and the modal properties of the tested structure is developed. An iterative solution procedure is then provided to solve for the structural updating parameters that characterise the modifications of structural parameters at element level, giving optimised solutions in the least squares sense without requiring an optimisation method. A regularization algorithm based on the Tikhonov solution incorporating the generalised cross-validation method is employed to reduce the influence of measurement errors in vibration modal data and then to produce stable and reasonable solutions for the structural updating parameters. The Canton Tower benchmark problem established by the Hong Kong Polytechnic University is employed to demonstrate the effectiveness and applicability of the proposed model updating technique. The results from the benchmark problem studies show that the proposed technique can successfully adjust the reduced finite element model of the structure using only limited number of frequencies identified from the recorded ambient vibration measurements.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.245-250
• /
• 2009

We propose a digital holographic interference analysis method based on a 2-frame phase-shifting technique for measuring an optical mirror surface. The technique using 2-frame phase-shifting digital interferometry is more efficient than multi-frame phase-shifting techniques because the 2-frame method has the advantage of a reduced number of interferograms, and then takes less time to acquire the wanted topography information from interferograms. In this measurement system, 2-frame phase-shifting digital interferograms are acquired by moving the reference flat mirror surface, which is attached to a piezoelectric transducer, with phase step of 0 or $\pi$/2 in the reference beam path. The measurements are recorded on a CCD detector. The optical interferometry is designed on the basis of polarization characteristics of a polarizing beam splitter. Therefore the noise from outside turbulence can be decreased. The proposed 2-frame algorithm uses the relative phase difference of the neighbor pixels. The experiment has been carried out on an optical mirror which flatness is less than $\lambda$/4. The measurement of the optical mirror surface topography using 2-frame phase-shifting interferometry shows that the peak-to-peak value is calculated to be about $0.1779{\mu}m$, the root-mean-square value is about $0.034{\mu}m$. Thus, the proposed method is expected to be used in nondestructive testing of optical components.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.215-221
• /
• 2000

A simple numerical modeling technique is proposed for the analysis of framed tube structures with multiple internal tubes. The structures are analysed using a continuum approach in which each tube is individually modelled by a tube beam that accounts for the flexural and shear deformations, as well as the shear lag effects. By simplifying assumptions regarding the form of strain distributions in external and internal tubes, the structural behaviours is reduced to the solution of a single second order linear differential equation. The numerical analysis uses the variational approach on the basis of the minimum potential energy priniciple. Three framed-tube sructures with single, two and three internal tubes are analysed to verify the applicability and reliability of the proposed method.

• 한국통신학회논문지
• /
• 제31권11C호
• /
• pp.1085-1091
• /
• 2006

The major goal of this paper is to develop a practically implemental radial basis function (RBF) neural network based multi-user detector (MUD) for direct sequence (DS)-CDMA system. This work is expected to provide an efficient solution for RBF based MUD by quickly setting up the proper number of RBF centers and their locations required in training. The basic idea in this research is to estimate all the possible RBF centers by using supervised ${\kappa-means$ clustering technique, and select the only centers which locate near seemingly decision boundary between centers, and reduce further by grouping the some of centers adjacent each other. Therefore, it reduces the computational burden for finding the proper number of RBF centers and their locations in the existing RBF based MUD, and ultimately, make its implementation practical.

• Journal of International Society for Simulation Surgery
• /
• 제4권1호
• /
• pp.21-23
• /
• 2017

Purpose In this paper, we proposed alternate neighborhood system and reverse spread-direction approach for accurate and fast cellular automata-based image segmentation method. Materials and Methods On the basis of a simple but effective interactive image segmentation technique based on a cellular automaton, we propose an efficient algorithm by using Moore and designed neighborhood system alternately and reversing the direction of the reference pixels for spreading out to the surrounding pixels. Results In our experiments, the GrabCut database were used for evaluation. According to our experimental results, the proposed method allows cellular automata-based image segmentation method to faster while maintaining the segmentation quality. Conclusion Our results proved that proposed method improved accuracy and reduced computation time, and also could be applied to a large range of applications.