• Elastomers and Composites
• /
• 제50권4호
• /
• pp.286-291
• /
• 2015

Polyvinylacetate (PVAc) was prepared using thermal initiation and redox initiation via emulsion polymerization at $80^{\circ}C$. The polymerization conditions had a significant effect on the properties of the synthesized PVAc. When hydrogen peroxide and tartaric acid as the initiator for redox polymerization were used, the synthesized PVAc had a low molecular weight. In comparison with thermal polymerization, smaller PVAc particles were formed during the redox polymerization due to relatively faster polymerization rate, which in turn resulted in improved adhesion property. It is considered that the rapid generation of smaller particles induces the formation of a large surface area.

• Macromolecular Research
• /
• 제17권10호
• /
• pp.746-749
• /
• 2009

Poly(ethylene terephthalate) (PET) fabric/poly(3,4-ethylenedioxythiophene) (PEDOT) composite with stable and high electrochemical activity was fabricated by chemical and electrochemical polymerization of 3,4-ethylenedioxythiophene (EDOT) on a PET fabric in sequence. Effects of polymerization conditions on the following characteristics of the composite were studied: electrical conductivity and surface morphology. The electrochemical properties were also investigated by cyclic voltammetry and cyclic charge/discharge experiments. The specific volume resistivity, electrical conductivity and specific discharge capacitance of the composite were 0.034 $\Omega-cm$ and 25 S/cm, and 54.5 F/g, respectively.

• 대한화학회지
• /
• 제39권4호
• /
• pp.294-300
• /
• 1995

빛에 대한 폴리피롤(PPy)의 광전기화학적인 거동을 $Fe(CN)_6^{4-}/Fe(CN)_6^{3-}$과 $I^-/I_2$를 산화환원종으로 수용액에서 관찰하였다. PPy은 정전압법으로 Pt와 glassy-C 그리고 ITO에 각각 중합하였으며 PPy막을 입힌 전극에 빛이 쪼여졌을 때 산화환원종의 산화환원 전위에서 전류의 증가를 얻었다. 증가된 전류는 PPy이 갖는 반도체 특성과 빛에 의한 전극표면에서의 산화환원 광열촉진에 기인하며, PPy 중합시 사용한 지지전해질의 음이온(dopants)과 산화환원종, 용액의 pH에 의존하였다.

• Korean Chemical Engineering Research
• /
• 제50권6호
• /
• pp.1076-1081
• /
• 2012

라텍스 개질 콘크리트의 혼화용 라텍스를 개발할 목적으로 carboxylated styrene butadiene 라텍스를 이단계 유화중합법으로 제조하고 콘크리트에 적용하는 실험을 수행하였다. 음이온 유화제로는 sodium dodecylbenzene sulfonate와 sodium salt of lauryl sulfate를 선정하였고, 라텍스 안정제로는 nonylphenoxy poly(ethyleneoxy) ethanol 계열의 동족체들(n=10, 20, 40)을, 그리고 potassium persulfate와 sodium bisulfite를 redox 개시제로, $Na_2HPO_4$와 $K_2CO_3$를 전해질로 각각 사용하였다. 중합안정성에 대한 음이온 유화제의 종류와 사용량의 영향 및 입자크기의 전해질 농도 의존성을 실험적으로 고찰하여 LMC용 라텍스 제조에 적합한 중합처방을 제시하였다. 이 중합처방으로 제조한 라텍스의 LMC 용도에 대한 적용성을 시험한 결과, 슬럼프와 공기량은 한국도로공사의 품질기준을 충족하며, 역학적 물성시험 결과에서는 28일간 경화시킨 시편의 압축강도와 휨강도가 품질기준보다 각각 39.6, 87.3% 더 높은 증진효과가 발현됨을 확인하였다.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.739-744
• /
• 1996

Lanthanide diphthalocyanines have interesting properties on electrochemical and chemical redox reactions. It is however, difficult to use because of thier short device life. Plasma-polymerization attends to improvement thier device life. Yb-diphthalocyanine ($YbPc_2$) polymer film was deposited in a parallel plate electrodes-type RF plasma reactor. $YbPc_2$ was sublimed into the argon plasma, and polymer film was obtained on a substrate. Radio frequency was constant of 13.56MHz. Pressure of argon gas, sublimation rate of $YbPc_2$ and RF power were variable parameters depending on film quality. Surface of polymer films include a lot of sub-micron order lumps. It was indicated that size of lumps depends on polymerization degree controled by parameters. Size of lumps and polymerization degree are increased with RF power. However, by the high RF power over 40W, polymerization degree is decreased with RF power and surface of film is rough. In condition of RF power is high, polymerization will compete with etching of film. We obtained good films for electrochromic display with RF power of 20W, argon gas pressure of 8.0 Pa and sublimationrate of $1.2 \times 10$ mol/min, and good films for gas sensor with RF power of 30W, argon gas pressure of 10.6Pa and sublimation rate of $1.2 \times 10$ mol/min.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.375-383
• /
• 2007

Treatment efficiency research was performed using Fenton process and the electrochemical process in the presence of ferrous ion and hydrogen peroxide for the industrial wastewater including 1,4-Dioxane produced during polymerization of polyester. The Fenton process and the electrochemical Iron Redox Reaction (IRR) process were applied for this research to use hydroxyl radical as the powerful oxidant which is continuously produced during the redox reaction with iron ion and hydrogen peroxide. The results of $COD_{Cr}$ and the concentration of 1,4-Dioxane were compared with time interval during the both processes. The rapid removal efficiency was obtained for Fenton process whereas the slow removal efficiency was occurred for the electrochemical IRR process. The removal efficiency of $COD_{Cr}$ for 310 minutes was 84% in the electrochemical IRR process with 1,000 mg/L of iron ion concentration, whereas it was 91% with 2,000 mg/L of iron ion concentration. The lap time to remove all of 1,4-Dioxane, 330 mg/L in the wastewater took 150 minutes with 1,000 mg/L of iron ion concentration, however it took 120 minutes with 2,000 mg/L of iron ion concentration in the electrochemical IRR process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.544-547
• /
• 2000

Polypyrrole (PPy) was chemically synthesized within the pores of nanoporous polycarbonate (PC) Particle Track-etched Membranes (nano-PTM). Hollow tubules are formed because polypyrrole initially deposits on the surface of the pores walls. By running successive syntheses, we have obtained wires (filled tubules). The redox property of PPy nanotubules was investigated by cyclic voltammetry. The redox potential was lowered as much as 0.5V vs. Ag/AgC1, comparing with electrosynthesized PPy film. It suggests that an electron hopping mechanism of PPy nanotubules was improved. Electric conductivity of PPy nanotubules and nanowire was evaluated. We obtained good electric conductivity of PPy nanotubules even in the neutral state. The conductivity and activation energy were $10^1$ order at the room temperature and 25.3 meV respectively.

• 폴리머
• /
• 제35권4호
• /
• pp.363-369
• /
• 2011

콘크리트 제조 시 사용되는 잉여수를 지연 흡수시키기 위하여 역유화중합법으로 중합된 가교 poly(sodium acrvlate) (cPSA)를 ethylene glycol dimethacrylate(EGDMA)로 표면 가교시켰다. cPSA의 제조에서 연속상은 paraffin liquid, 단량제는 8 M 농도의 NaOH 수용액으로 90% 중화된 acrylic acid(AA), 가교제는 N,N-methylene bisacrylamide(MBA), redox 개시제는 ammonium persulfate(APS)와 sodium metabisulfite(SMBS)를 사용하여 역유화중합법으로 제조하였다. 제조된 cPSA는 EGDMA플 사용하여 표면 가교 반응을 수행하였다. 시멘트 수용액에서 $Ca^{2+}$ 이온과 cPSA의 상호 작용을 관찰하기 위하여 FTIR spectroscopy 분석법을 사용하였다. 제조된 흡수제들을 탈이온수 $Ca(OH)_2$ 수용액(pH 12) 및 시멘트 포화 수용액에서의 팽윤비를 측정하였으며, cPSA는 2시간만에 팽윤이 완료되었지만, 표면이 가교된 cPSA-EGDMA는 3시간 후 팽윤이 거의 완료되는 것을 관찰하였다. 또한 합성한 cPSA-EGDMA를 첨가함으로써 시멘트의 응결시간과 모르타르의 압축강도 증가를 관찰하였다.

• 공업화학
• /
• 제8권5호
• /
• pp.866-871
• /
• 1997

전분의 친수성 및 반응성을 조절하기 위하여 propylene oxide, 1,2-epoxybutane, glycidyl methacrylate, maleic anhydride, caprolactone 등을 반응시켰으며 건조되지 않은 전분을 사용할 경우 propylene oxide, maleic anhydride 외에는 반응 수율이 아주 낮아지는 것이 관찰되었다. 이렇게 개질된 전분을 스티렌과 반응시켜 그라프트 공중합물로 전환하였으며 여러가지 중합방법에 대한 그라프트 수율이 비교되었다. 그라프트 중합반응의 경우 용액중합 및 cerium(IV)이온에 의한 중합은 각각 낮은 효율과 수율을 보였다. 현탁중합 방법으로는 전분 입자의 친수성 때문에 폴리스티렌으로 전분을 encapsulation 하기가 어려웠으며, 유화중합이 스티렌을 그라프트 시키기에 제일 적당한 방법임을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.243.1-243.1
• /
• 2010

Devices based on nanomaterials platforms are emerging as a powerful tool for ultrasensitive sensors for the direct detection of biological and chemical species. In this talk, we will report the preparation and the full characterization of electrochemical polymerization of biopolymers platforms and nano-structure formation for electrochemical detection of enzymatic activity and toxic compound in electrolyte for biosensor applications. Formation of an electroactive polymer film of two different compounds has been quantified by observing new redox peak at higher potentials in cyclic voltammogram measurements. RCT value of at various biopolymer concentration based hybrid films has been obtained from electrochemical impedance spectroscopy analysis and possible mechanism for formation of complexes during electrochemical polymerization on conducting substrates has been investigated. Biosensors developed based on these hybrid biopolymers have very high sensitivity.