• Textile Coloration and Finishing
• /
• v.2 no.1
• /
• pp.8-13
• /
• 1990

The fading of dyed material by light has long been subject of investigation, yet surprisingly little is known of the fundamental photochemical reactions, because of mainly the complex nature of dye-fibre system. The effect of the chemical structure of dye on lightfastness has been mostly studied when there is substituents on the place satisfied Hammett rule. Therefore, in this investigation the effectiveness of chemical structures of Congo Red and Benzopurpurine 4B unsatisfied Hammett rule on dyeing property and lightfastness of cotton was studied. The results obtained from this study were as follows; 1. Highly polar solvents showed hypsochromic shift. 2. Adsorption isotherm curves of the two dyes were Freundlich type. And Congo Red showed good dyeing property in comparision with Benzopurpurine 4B. 3. The type of the FR curve of the two dyes was first-ordr curve. And the CF curves of the two dyes showed normal fading state during irradiation. 4. During irradiation, the Hue was changed on the part of yellowish. The Value was increasing and the Chroma was decreasing. 5. Benzopurpurine 4B showed good lightfastness in comparision with Congo Red.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.237-244
• /
• 2018

Three super hydrophobic red fluorescence dyes were selected to dye high molecular weight polyethylene fiber. Their absorbance and emission spectra were obtained and Stokes' shift was measured. Fluorescence emission strength of the dyes on the fiber was investigated and therefore Fluoro Red 3 was determined as the best one among those three dyes in this experiment. Dyeing properties and fluorescence intensities were investigated using the Fluoro Red 3 on high molecular weight polyethylene fiber at various dyeing conditions. The optimum concentration of a dispersing agent was appeared at 10wt% in aqueous solution. The best dyeing was obtained at $125^{\circ}C$ for 1 hour. The color fastnesses to the washing and rubbing were as high as ratings 4~5, however, the fastness to light was exhibited ratings 2~3.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.187-187
• /
• 2013

양자점(Quuantum dot, QD)은 0차원 특성을 가지는 구조로 양자 구속 효과로 인하여 bulk와 는 다른 구조적, 광학적, 전기적 특성을 가지고 있다. InAs QD는 size와 barrier의 bandgap 조절을 이용하여 쉽게 bandgap을 바꿀 수 있는 장점이 있어 solar cell, semiconductor laser diode, infrared photodetector 등으로 많은 연구가 이루어지고 있다. 일반적으로 Stranski-Krastanov (SK) mode로 성장한 InAs QD는 보통 GaAs epilayer와의 lattice mismatch (7%)를 이용하여 성장을 하고 이로 인하여 strain을 가지고 있고 QD의 density와 stack이 높을수록 strain이 커진다. 하지만 sub-monolayer (SML) QD 같은 경우 wetting layer가 생기는 지점인 1.7 ML이하에서 성장되는 성장 방식으로 SK-QD보다는 작은 strain을 가지게 된다. 또 QD의 size가 작아 SK-QD보다 큰 bandgap을 가지고 있다. 본 연구에서는 분자선 에피택시(molecular beam epitaxy, MBE)를 이용하여 semi-insulating GaAs substrate 위에 InAs QD를 0.5/1/1.5/1.7/2/2.5 monolayer로 성장을 하였다. GaAs과 InAs의 성장온도와 성장속도는 각각 $590^{\circ}C$, 0.8 ML/s와 $480^{\circ}C$, 0.2 ML/s로 성장을 하였으며 적층사이의 interruption 시간은 10초로 고정하였고 10주기를 성장하였다. Photoluminescence (PL)측정 결과 SML-QD는 size에 따라서 energy가 1.328에서 1.314 eV로 약간 red shift를 하였고 SK-QD의 경우 1.2 eV의 energy정도로 0.1 eV이상 red shift 하였다. 이는 QD size에 의하여 energy shift가 있다고 사료된다. 또 wetting layer의 경우 1.41 eV의 energy를 가지는 것으로 확인 하였다. SML-QD는 SK-QD 보다 반치폭(full width at half maximum, FWHM)이 작은 것은 확인을 하였고 strain field의 감소로 해석된다. 하지만 SML-QD의 경우 SK-QD보다 상대적으로 작은 PL intensity를 가지고 있었다. 이를 개선하기 위해서는 보다 높은 QD density를 요구하게 되는데 growth temperature, V/III ratio, growth rate 등을 변화주어서 연구할 계획이다.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.157-164
• /
• 2015

The existing input device is limited to keyboard and mouse. However, recently new type of input device has been developed in response to requests from users. To reflect this trend we propose the new type of input device that gives instruction as analyzing the hand motion of image without special device. After binarizing the skin color area using Cam-Shift method and tracking, it recognizes the hand motion by inputting the finger areas and the angles from the palm center point, which are separated through labeling, into four cardinal directions and counting them. In cases when specific background was not set and without gloves, the recognition rate remained approximately at 75 percent. However, when specific background was set and the person wore red gloves, the recognition rate increased to 90.2 percent due to reduction in noise.

• Korean Journal of Metals and Materials
• /
• v.49 no.10
• /
• pp.818-822
• /
• 2011

ZnO nanorods were grown on Au-coated Si substrates by vapor phase transport (VPT) at the growth temperature of $600^{\circ}C$ using a mixture of zinc oxide and graphite powders as source material. Au thin films with the thickness of 5 nm were deposited by ion sputtering. Temperature-dependent photoluminescence (PL) was carried out to investigate the optical properties of the ZnO nanorods. Five peaks at 3.363, 3.327, 3.296, 3.228, and 3.143 eV, corresponding to the free exciton (FX), neutral donor bound exciton ($D^{\circ}X$), first order longitudinal optical phonon replica of free exciton (FX-1LO), FX-2LO, and FX-3LO emissions, were obtained at low-temperature (10 K). The intensity of these peaks decreased and their position was red shifted with the increase in the temperature. The FX emission peak energy of the ZnO nanorods exhibited an anomalous behavior (red-blue-red shift) with the increase in temperature. This is also known as an "S-shaped" emission shift. The thermal activation energy for the exciton with increasing temperature in the ZnO nanorods is found to be about 26.6 meV; the values of Varshni's empirical equation fitting parameters are = $5{\times}10^{-4}eV/K$, ${\beta}=350K$, and $E_g(0)=3.364eV$.

• Polymer(Korea)
• /
• v.34 no.4
• /
• pp.376-380
• /
• 2010

Donor-$\pi$-acceptor (D-$\pi$-A) type chromophore-based polymers were newly synthesized. These polymers exhibited absorption peak due to intramolecular charge transfer (ICT) in a visible range as well as absorption peak due to carbonyl group in both solution and film state by measuring UV visible spectra. The addition of $Eu^{3+}$ ion into the polymers induced red-shift in absorption due to ICT and the color changes from yellow to red in the solution and film were observed by naked eyes. The contents of crosslinking agent influenced the features and solubility of the polymers. In addition, the contents of crosslinking agent and the $Eu^{3+}$ ion addition improved film-forming ability.

• Journal of Biosystems Engineering
• /
• v.29 no.4
• /
• pp.329-334
• /
• 2004

This study was conducted to investigate the characteristics of transmittance spectrum of Korean red ginseng using VIS/NIR spectroscopy. The results of this study were as follows; Light intensity affected the characteristics of the spectrum. For over 40% light intensity, the first and second peaks appeared at 700nm and 1,100nm, respectively. For the 20% light intensity, the first and second peaks appeared at 800nm and 1,100nm, respectively. Thus, the typical color characteristics of halogen lamp were similar to each other if over 40% of maximum light intensity power, otherwise it was not. Transmittance spectrum showed different characteristics at different portions of red ginseng. Normal red ginseng showed strong intensity at the first peak around 700nmbecause of reddish internal tissue. However, an internal white core red ginseng showed weak peak-intensity due to whitish internal tissue. There was no significant difference in the second peak at 800nm for the different internal qualities. Third peak at 900nm showed somewhat difference by internal qualities but it was difficult to find significant trend. To separate the differences of the internal qualities, intensity differences between peaks were used. It was possible to classify normal red ginseng by the differences of "peak 1 -peak 2" and "peak 1 - peak 3". In addition, shift of the first and the third peaks in the spectrum could separate normal red ginseng from others.ginseng from others.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.414-415
• /
• 2006

At present, Characteristic of high color reproduction for LCD products needed in Display market. Therefore, The improving methods of high color reproduction are alteration of color Filter or Red, Green, Blue phosphor alteration of CCFL. But High color reproduction phosphor is short life time as compared with conventional phosphor. In this experiment, by using split the Red, Green, Blue CCFL with high color reproduction phosphor instead of conventional high color reproduction CCFL. We knew that the high color reproduction RGB split CCFL BLU has same spectrum data and chromaticity, but has long life time as manufacturing RGB split CCFL and reduce chromaticity shift following long time discharge as compared with conventional high color reproduction CCFL.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4590-4599
• /
• 2011

The Color shift phenomenon is becoming a major degradation factor of the emitting color purity in the organic emitting diodes which is generating a plurality of colors. In this study, the basic structure of organic light emitting diode device is comprised of ITO/${\alpha}$-NPD/$Alq_3$:DCJTB[wt%]/$Alq_3$/Mg:Ag, we have carry out numerical simulation of the electric-optical characteristics in organic light emitting diode device to estimate the mechanism of color shift phenomenon. We have investigated the causes of the color shift through the change of DCJTB doping concentration ratio. As the result, we have confirmed that the changes of the recombination rate which generated by trapped electrons and holes is one of the major factors for the color shift phenomenon.

• Journal of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.73-84
• /
• 1975

The effect of pressures and temperatures on the stabilities of the toluene-iodine charge transfer complex have been investigated through ultraviolet spectrophotometric measurements in n-hexane. The stabilities of complexes were measured at $25~60{\circ}C$ under 1~1,200 bars. The equilibrium constant of the complex was increased with pressure and decreased with temperature raising. The absorption coefficient was increased with both pressure and temperature. Changes of volume, enthalpy, free energy and entropy for the formation of complexes were obtained from the equilibrium constants. The red-shift observed a higher pressure, the blue-shift at a higher temperature and the relation between pressure and oscillator strength were discussed by means of thermodynamic functions.