• Korean Journal of Microbiology
• /
• v.15 no.4
• /
• pp.159-169
• /
• 1977

The bacteria of red colonies isolated from soil were identified as Serratia marcescens. The best solvent for pigment extraction was n-buthanol and the pigment was identified as prodigiosene. The extracted pigment was stable on temperature and light but not on acidity. The redpigment color changed into red in alkaline solution. The maximum absorbancy of pigment was 466 nm in alkaline condition and 540 nm in acid condition. And the pigment formed single spot on the TLC(starch). By the result of infra red spectrum, the red pigment has the same absorption pattern comparing with, the prodigisin produced by S. marcescens strain Nima. It was confirmed that the pigment was secondary metabolite and that the maximal peak of production appeared at 30 hrs after the inoculation, when the bacterial growth was in statinary state. Referring to the effect of temperature, the pigment was not formed at $36^{\circ}C$ and the optimal temperature for both of bactrial growth and pigmentation was $30^{\circ}C$. The optimal range of pH for pigmentation was 5.0 and under the condition the bacterial growth was not affected at all. Examining the effects of light, the bacterial pigment ation was more increased in darkness than in visible light.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.5
• /
• pp.218-221
• /
• 2007

High-efficiency white organic light-emitting diodes(WOLEDs) were fabricated with two emissive layers and an blocking layer was sandwiched between two phosphorescent dopants, bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium III(FIrpic) as the blue emission and a newly synthesized red phosphorescent material guest, bis(5-acetyl-2-phenylpyridinato-N,C2') acetylacetonate($(acppy)_2Ir(acac)$). This blocking layer prevented a T-T annihilation in a red emissive layer, and balanced with blue and red emission as blocking of hole carriers. The white device showed Commission Internationale d'Eclairage($CIE_{x,y}$) coordinates of (0.317, 0.425) at 22400 $cd/m^2$, a maximum luminance of 27300 $cd/m^2$ at 268 $mA/cm^2$, a maximum luminous efficiency and power efficiency of 26.9 cd/A and 18.6 lm/W.

• Toxicological Research
• /
• v.6 no.1
• /
• pp.1-12
• /
• 1990

Effect of red ginseng treatment on experimentally induced hyperkeratosis was investigated by light microscopic observation scanning electron microxcope (SEM) examination, epidermal enzyme activities nd lipid contents. Both light microscopic observation and SEM examination showed that hexadecane induced epidermal hyperplasia, hypertrophy and hyperkeratosis by increasing the numbers as well as the sizes of epidermal cells including desquamating horny cells. The superficial horny cells were protruded around the base of hair shaft. Among red ginseng components, only saponin treatment inhibited epidermal hyperplasia and hyperkeratosis by reducing the thickness of epidermis and arranging the cornified cells. Saponin from korean red ginseng inhibited abnormally increased epidermal LDH, ICD and G6PDH activities and reduced the contents of epidermal lipids induced by hexadecane. It seems that red ginseng saponin has preventive effect on experimental hyperkeratosis possibly by controlling the enzyme activities involved in epidermal cellular metabolism, resulting in reduced amounts of abnormal epidermal lipids.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04a
• /
• pp.76-77
• /
• 2009

In this paper, We have studied Electron Transport Layer(ETL) in the New Organics applied to Red phosphorescent organic light-emitting devices. The structure of ITO/2-TNATA(15nm)/CBP;$Ir(piq)_3$/DPVBi(30nm)/New ETL(60nm)/LiF(0.5nm)/Al(100nm) has been used, measured changing doping concentration of EML. The results of OLED turn-on voltage at 2.2V, and Maximum Luminance at 2.8V was $1000cd/m^2$. This high luminance at low voltage results from a high electron. conduction of the new electron transport layer.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.4
• /
• pp.270-274
• /
• 2006

A color filter array (CFA) helps a single electrical image sensor to recognize color images. The Red-Green-Blue (RGB) Bayer CFA is commonly used, but the amount of the light which arrives at the photodiode is attenuated with this CFA. Red-White-Blue (RWB) CFA increases the amount of the light which arrives at photodiode by using White (W) pixels instead of Green (G) pixels. However, white pixels are saturated earlier than red and blue pixels. The pseudo multiple capture scheme and the corresponding RWB CFA were proposed to overcome the early saturation problem of W pixels. The prototype CMOS image sensor (CIS) was fabricated with $0.35-{\mu}m$ CMOS process. The proposed CIS solves the early saturation problem of W pixels and increases the dynamic range.

• The Research Journal of the Costume Culture
• /
• v.7 no.1
• /
• pp.82-99
• /
• 1999

The purpose of this study was to investigate the traditional costume colors in ancient Korea. The results of this study can be summarized follows : The traditional costume colors in ancient Korea was affected on Chineses goverment official\`s costume colors, specially in Tongil Silla Dynasty. Goverment official\`s costume colors were purple(紫), red(赤), yeoolw(黃), blue(靑). The traditional Korean colors for clothes were devided in the white costume for low class and the colored costume of high class. The traditional Korean colors for colthes became fixed in the later Chosun dynasty, According to developing of dyeing technic, the prohibition of red costume for low class made for wear red undercloth. And on account of costume color in sumptuary law occured the transition of costume color. As transition of costume color, yellow(黃) changed in light in light yellow(松花色), purple(紫) did in dark green purple(茶割) Also it was found that the traditional Korean color for clothes was many kinds of soft, deep, natural colors out of red(紫)·yellow(黃)·white(白)·black(黑)·blue(靑).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.6
• /
• pp.531-535
• /
• 2007

To invest the luminescent characteristics of red light emitting OLED device, a dual dopant system was incorporated into the emitting layer. The multiple layer OLED device structure was $ITO(1500\;{\AA})/HIL(200\;{\AA})/a-NPD(600\;{\AA})/EML(300\;{\AA})/Alq_3(200\;{\AA})/LiF(7\;{\AA})/Al(1800\;{\AA})$. The concentrations of the rubrene dopant were tested at 0 vol.%, 3 vol.%, 6 vol.% and 9 vol.%. The maximum device efficiency and life time were obtained at the rubrene dopant concentration of 6 vol.%. Emission spectrum and color coordinate of devices showed no relationship with rubrene dopant concentration. Experiment results show that rubrene dopant absorbs energy from $Alq_3$ host and transfer it to RD1 dopant acting as an energy intermediate and influencing the device efficiency, finally the red light is emitted from the RD1 dopant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.153-156
• /
• 2005

In this study, we have investigated transient properties of top emission organic light emitting diode (OLED) with a red electrophosphorescent dopant. The emission spectrum shows a strong peak at 620 nm accompanied with a small peak at 675 nm in the red region. Time evolution of electrophosphorescence reveals a decay time of 703 ms at a voltage pulse of 5 V in a device with an emitting area of 20 $mm^2$. Rise and delay times vary from 450 to 14 ms and 73 to 3 ms, respectively, as the voltage amplitude increases from 4.5 to 10 V. These results are compared with the red emitting device without an electron injection layer.

• Journal of Applied Biological Chemistry
• /
• v.59 no.2
• /
• pp.129-132
• /
• 2016

This study was conducted to evaluate the attraction effects of Sitophilus zeamais and Tribolium castaneum to light emitting diode (LED) trap in granary and compared with the black light bulb (BLB) trap, which is typical used in commercial trap. The red LED trap showed more attractive to S. zeamais and T. castaneum than that of the BLB. Moreover, the external condition of granary was about 1.5 times more attractive to S. zeamais and T. castaneum than the internal condition of granary. These results suggested that red LED trap could be useful to control S. zeamais and T. castaneum in granary.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.49-56
• /
• 2008

Typical rose flowers, 'Red Corvette (red)', 'Nobless (pink)', 'Golden Metal (yellow)', and 'Rose Yumi (white)', were used as experimental materials to examine flower color changes as affected by pressing method and light treatment for four weeks and eight weeks by 2,000 lux fluorescent light at a 16 hours daylength. Pressing materials in silicagel mat resulted in the least change after pressing and light treatment for all kinds. On the contrary, an electric pressing device caused color to change to brown. Flower colors deteriorated the most by an electric pressing device made in Korea for pink rose; an electric pressing device made in Japan for white rose; and paper sheet made in Korea for red rose. The sequence of degree in severity of color change after pressing was pink, yellow, and white roses. Light treatment brought about the most extreme color change in yellow 'Nobless' rose, while other three cultivars were rather stable in change of color.