• Journal of the Korean Wood Science and Technology
• /
• 제21권1호
• /
• pp.21-38
• /
• 1993

In order to investigate the influence of recycling, a laboratory method simulating the papermaking process was used for assessing the effects of recycling on fiber properties. Sw-BKP, Hw-BKP and BGP were disintegrated and beaten to about 42$^{\circ}$SR-44$^{\circ}$SR by a valley beater. After beating, these pulps were dewatered by centrifuge and dried at 90$^{\circ}C$ for 72hrs. This recycling process(sequence of wetting, defiberating, dewatering and drying) was repeated seven times. Physical, mechanical and optical properties of recycled pulps were evaluated by TAPPI Standards. Morphological changes occurred through recycling process was observed by SEM. Sheet density decreased with recycling. The largest drop in density occurred during the first recycling. The porosity values decreased with recycling. Mechanical properties such as tensile, burst strength and folding endurance, decreased with recycling. However tear strength of Sw-BKP and mixtured pulp increased at the first recycling. Optical properties such as brightness, opacity and light scattering coefficient, increased with recycling. However, brightness of mixtured pulp gradually decreased with recycling. Fibrillated outer layer of the fiber was gradually removed from the surface with recycling. As a result of recycling, crinkles on the fiber surface were found to be more folded.

• 통상정보연구
• /
• 제16권4호
• /
• pp.171-190
• /
• 2014

기술발전에 의한 전자제품의 짧은 소비주기는 폐가전제품의 재활용 처리라는 국제적인 환경 문제를 유발시키고 있다. 인도나 중국과 같이 경제력과 소비수준이 급격히 높아지는 국가들에서는 폐가전제품의 급증이 사회적 이슈가 되고 있다. 이들 나라에서는 대부분의 폐전자제품이 적절하지 못한 방식(uncontrolled recycling)으로 처리됨으로써 심각한 환경오염과 건강문제를 야기하고 있다. 국내의 경우도 이들 국가와 크게 다르지 않다. 국내의 경우 기존의 지역별 혹은 개별 기업 수준에서 재활용센터가 운영 중에 있으나, 대부분 일일 처리한도를 초과하여 운영되고 있어서 잉여 폐전자제품의 처리방안에 대한 고민이 시급한 현실이다. 이에, 본 연구에서는 비용과 이동거리 관점에서 재활용센터 입지를 재조정함으로써 보다 재처리를 보다 효율화 할 수 있는 수리모형을 개발, 제안해 보고자 한다. 국내 특정지역의 실제 폐전자제품과 재처리센터 데이터를 활용하여 제안된 최적화 입지 모형을 검증함으로써 국내는 물론 비슷한 문제를 가진 다른 국가의 재처리 문제 개선에도 도움을 주고자 한다.

• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.88-95
• /
• 2008

With society focusing more and more on environmental issues, the recycling of materials of all types has become an important concern. In this paper, optimization method is developed for reducing cost and improving quality in mill scale recycling. An experimental investigation into the process parameter effects is presented to determine the optimum configuration of parameters for performance, quality and cost. Taguchi's optimization approach was used to obtain the optimal parameters. The significant parameters were identified and their effects on mill scale recycling were studied. As a results, a confirmation experiment with the optimal levels of process parameters was carried out in order to demonstrate the effectiveness of the Taguchi method.

• 한국결정성장학회지
• /
• 제10권2호
• /
• pp.159-165
• /
• 2000

본 연구에서는 남해안 일대의 굴 고막, 바지락 패각에 대한 부존환경을 조사하였으며 그리고 부존환경 개선, 환경오염 방지 등을 위한 패각의 재활용 방안을 확립하였다. 패각의 부존환경은 공유수면의 불법매립 또는 연안지역에 야적 .방치된 상태였다. 부존패각의 효율적인 재활용을 위하여 성인 메카니즘 그리고 XRD, TG-DTA분석을 행한 결과, 탄산칼슘으로의 제조가 최적임을 알았다. 본 연구에서는 부존 패각을 탄산칼슘과 과립형의 패화석비료로 재활용하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1803-1806
• /
• 2008

Various efforts of reducing the green house gas in the whole industrial fields including railway industry have been implemented. Tilting train is the key example because it can run more faster on the existing rail than others due to its composite body. The system has an advantage of light weight but also a task to solve, recycling of composite material. To recycle the CFRP(Carbon Fiber Reinforced Plastic), there are two typical methods; chemical and thermal method. In this study, more environmentally friendly recycling method was recommended through the environmental function through comparing both recycling methods.

• 자원리싸이클링
• /
• 제9권5호
• /
• pp.33-37
• /
• 2000

• 자원리싸이클링
• /
• 제10권2호
• /
• pp.50-53
• /
• 2001

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 1999년도 춘계공동학술대회: 지식경영과 지식공학
• /
• pp.253-260
• /
• 1999

The recycling cell formation problem means that disposal products me classified into recycling part families using group technology in their end of life phase. Disposal products have the uncertainties of product status by usage influences during product use phase and recycling cells are formed design, process and usage attributes. In order to treat the uncertainties, fuzzy set theory and fuzzy logic-based neural network model are applied to recycling cell formation problem far disposal products. In this paper, a heuristic approach fuzzy ART neural network is suggested. The modified fuzzy ART neural network is shown that it has a great efficiency and give an extension for systematically generating alternative solutions in the recycling cell formation problem. We present the results of this approach applied to disposal refrigerators and the comparison of performances between other algorithms. This paper introduced a procedure which integrates economic and environmental factors into the disassembly of disposal products for recycling in recycling cells. A qualitative method of disassembly analysis is developed and its ai is to improve the efficiency of the disassembly and to generated an optimal disassembly which maximize profits and minimize environmental impact. Three criteria established to reduce the search space and facilitate recycling opportunities.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 1999년도 춘계공동학술대회-지식경영과 지식공학
• /
• pp.253-260
• /
• 1999

The recycling cell formation problem means that disposal products are classified into recycling part families using group technology in their end of life phase. Disposal products have the uncertainties of product status by usage influences during product use phase and recycling cells are formed design, process and usage attributes. In order to treat the uncertainties, fuzzy set theory and fuzzy logic-based neural network model are applied to recycling cell formation problem for disposal products. In this paper, a heuristic approach for fuzzy ART neural network is suggested. The modified Fuzzy ART neural network is shown that it has a great efficiency and give an extension for systematically generating alternative solutions in the recycling cell formation problem. We present the results of this approach applied to disposal refrigerators and the comparison of performances between other algorithms. This paper introduced a procedure which integrates economic and environmental factors into the disassembly of disposal products for recycling in recycling cells. A qualitative method of disassembly analysis is developed and its aim is to improve the efficiency of the disassembly and to generated an optimal disassembly which maximize profits and minimize environmental impact. Three criteria established to reduce the search space and facilitate recycling opportunities.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2003년도 추계정기총회 및 국제심포지엄
• /
• pp.258-262
• /
• 2003