• 한국재료학회지
• /
• 제22권2호
• /
• pp.71-77
• /
• 2012

When a new bonding agent using coal ash is utilized as a substitute for cement, it has the advantages of offering a reduction in the generation of carbon dioxide and securing the initial mechanical strength such that the agent has attracted strong interest from recycling and eco-friendly construction industries. This study aims to establish the production conditions of new hardening materials using clean bottom ash and an alkali activation process to evaluate the characteristics of newly manufactured hardening materials. The alkali activator for the compression process uses a NaOH solution. This study concentrated on strength development according to the concentration of the NaOH solution, the curing temperature, and the curing time. The highest compressive strength of a compressed body appeared at 61.24MPa after curing at $60^{\circ}C$ for 28 days. This result indicates that a higher curing temperature is required to obtain a higher strength body. Also, the degree of geopolymerization was examined using a scanning electron microscope, revealing a micro-structure consisting of a glass-like matrix and crystalized grains. The microstructures generated from the activation reaction of sodium hydroxide were widely distributed in terms of the factors that exercise an effect on the compressive strength of the geopolymer hardening bodies. The Si/Al ratio of the geopolymer having the maximum strength was about 2.41.

• 공업화학
• /
• 제28권4호
• /
• pp.485-489
• /
• 2017

Polyethylene terephthalate (PET)는 화학적 안정성과 높은 기계적 강도를 가지고 있어 식품, 의류 등 다양한 분야에서 사용되고 있으며, 이로 인해 PET는 주요 폐플라스틱 폐기물 중 하나이다. 본 연구에서 PET를 재활용하기 위해 ethylene glycol (EG)와 glycolysis의 반응을 이용하여 단량체 회수에 관한 연구를 수행하였다. 마이크로 튜빙 반응기를 사용하여 EG/PET비율 1~4, 반응시간 15~90 min, 반응온도 $250{\sim}325^{\circ}C$에서 망간, 구리 촉매 조건하에서 연구를 진행하였다. 10 wt% $Cu/{\gamma}-Al_2O_3$ 촉매에서 반응온도, 시간과 EG/PET의 비가 각각 $300^{\circ}C$, 30 min와 1 : 2였을 때 가장 높은 89.46%의 bis (2-hydroxyethyl) terephthalate monomer (BHET) 수율을 나타내었다.

• 수산해양기술연구
• /
• 제53권2호
• /
• pp.196-203
• /
• 2017

The renewable energy sources can be thought of one of the major measures to reduce greenhouse gas emissions in the industries. However, the utilization technology for those sources is approaching in the different matters. One of them, thermoelectric generation might be applicable to fishing industry. A various of internal combustion engines are used in a wide range of fisheries. After the ignition process, the heat passed out from the exhaust outlet. Recycling the heat could be not only an energy source but also reduction of green gas emission. Therefore, this study was designed to verify the feasibility of generation from wasted exhaust gas and analyze the performance. The designed experiment devices were connected with a data logger and an electric loader to quantify the currency and voltage. The devices were installed in a coastal fishing vessel for a gillnet fishery. During the whole fishing trips, the amount of generation was measured by engine rpm and the fishing operation procedures including vessel operations. At the maximum 1,500 rpm in the practical range, the generation amount was 113.6 W. The amount difference in relation to connection method was within 5 W: serial connection was 111.4 W and parallel connection was 115.8 W.

• 한국건축시공학회지
• /
• 제14권6호
• /
• pp.523-529
• /
• 2014

국내에서는 많은 양의 패류가 생산되고 있으나, 이로 인해 발생하는 대량의 패각을 처리하는데 많은 어려움을 겪고 있다. 따라서 본 연구에서는 이러한 패각을 대량으로 처리하기 위하여 건설재료로서의 가능성을 평가하고자 한다. 모르터의 잔골재를 패각으로 치환하여 흡수율, 압축강도를 측정하고 계면결합 형태를 관찰하였다. 대체적으로 패각의 치환율이 증가함에 따라 흡수율은 증가하였으며, 압축강도는 감소하였다. 예외적으로 꼬막 패각을 치환한 모르터는 치환율이 증가함에 따라 압축강도가 증가하였다. 패각 치환율의 증가에 따른 흡수율의 증가 및 압축강도의 감소는 패각 주위에 발생한 다공성 때문인 것으로 파악되었으며, 꼬막 패각을 치환한 모르터는 패각과 시멘트 입자간의 계면결합 형태가 양호하였기 때문에, 오히려 강도가 상승한 것으로 판단된다.

• ALGAE
• /
• 제31권4호
• /
• pp.373-378
• /
• 2016

Cochlodinium polykrikoides is a red-tide forming dinoflagellate that causes significant worldwide impacts on aquaculture industries and the marine ecosystem. There have been extensive studies on managing and preventing C. polykrikoides blooms, but it has been difficult to identify an effective method to control the bloom development. There is also limited genome information on the molecular mechanisms involved in its various ecophysiology and metabolism processes. Thus, comprehensive genome information is required to better understand harmful algal blooms caused by C. polykrikoides. We estimated the C. polykrikoides genome size using flow cytometry, with detection of the fluorescence of DNA stained with propidium iodide (PI). The nuclear genome size of C. polykrikoides was 100.97 Gb, as calculated by comparing its mean fluorescence intensity (MFI) to the MFI of Mus musculus, which is 2.8 Gb. The exceptionally large genome size of C. polykrikoides might indicate its complex physiological and metabolic characteristics. Our optimized protocol for estimating the nuclear genome size of a dinoflagellate using flow cytometry with PI can be applied in studies of other marine organisms.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.619-623
• /
• 2006

환경보전과 경제발전에 대한 문제가 전 산업에서 등장하면서 리우환경회의에서 $CO_2$ 배출규제가 채택되었고, 우리나라도 교통의정서에 서명함으로서 친환경 및 지속가능한 개발을 추진해야하는 의무를 가지게 되었다. 국내 건축물은 조기전면 철거와 재건축으로 인한 자원 및 건설에너지의 낭비와 폐자재 재활용 미흡의 문제를 가지고 있다. 본 연구에서는 건축물의 $C0_2$ 배출량을 추정하여 건축물의 환경친화성을 평가하고, 주거만족도 설문조사를 통해 현 국내건축물의 문제요소를 도출하여 건축물의 수명과 유연성을 증대하고 실내 건축 환경의 쾌적성을 향상시킬 수 있는 Smart Component 개발 방안을 모색해 보고자 한다.

• Journal of Microbiology and Biotechnology
• /
• 제22권12호
• /
• pp.1698-1704
• /
• 2012

Resveratrol, or its glycoside form piceid, is a dietary antioxidant polyphenolic compound, found in grapes and red wine that has been shown to have protective effects against cardiovascular disease. However, very low water solubility of the compound may limit its application in the food and pharmaceutical industries. The amylosucrase (AMAS) of Alteromonas macleodii Deep ecotype was expressed in Escherichia coli and showed high glycosyltransferase activity to produce the glucosyl piceid when piceid was used as an acceptor. The conversion yield of piceid glucoside was 35.2%. Biotransformation using culture of the E. coli harboring the amas gene increased the yield up to 70.8%. The transfer product was purified by reverse phase chromatography and recycling preparative HPLC, and the molecular structure of the piceid glucoside was determined using NMR spectroscopy. The piceid glucoside was identified as glucosyl-${\alpha}$-($1{\rightarrow}4$)-piceid. The solubility of glucosyl piceid was 5.26 and 1.14 times higher than those of resveratrol and piceid, respectively. It is anticipated that dietary intake of this compound is more effective by enhancing the bioavailability of resveratrol in the human body because of its hydrophilic properties in the intestinal fluid.

• 한국건설순환자원학회논문집
• /
• 제6권4호
• /
• pp.342-348
• /
• 2018

이 연구의 목적은 폐필름 포장재 재활용 성형재의 압축, 인장 및 휨 강도와 변형 특성을 생산 공장에 따라 측정하여 건설 2차제품의 적용 타당성을 평가하는 것이다. 재활용 성형재의 역학적 성능은 저밀도 폴리에틸렌 및 고밀도 폴리에틸렌의 일반적 값 수준으로 있지만 성능의 편차를 줄이고 품질의 안정화를 위해서는 1) 구성재료들의 혼합비율에 따른 재료 성능 평가; 2) 이물질 및 수분 함유량에 따른 재료성능 평가; 3) 다양한 제조 조건(제조공정, 가력 압력 및 폐필름 수거지역과 시기)에 대한 재료성능의 데이터베이스 관리 등의 현장 관리 체계마련이 요구되었다.

• 패션비즈니스
• /
• 제23권4호
• /
• pp.127-139
• /
• 2019

Up-cycling has evolved from its original form of the simple recycling of waste, into an industry of its own that has been gaining momentum. In many developed industries, up-cycling is increasingly seen as an 'environmentally-friendly way of production and ethical way of consumption'. However, an examination of the designs of branded up-cycled products suggests that there is a need for product development fueled by further research on materials. The purpose of this study is to introduce various production methods that can overcome the shortcomings of using waste material and Korean motifs for use in product development, which ultimately contribute to enhancing the potential variety and character of up-cycled products. In order to do so, the up-cycling industry was examined to define key concepts, domestic and overseas markets were surveyed, and case analyses were conducted on domestic and foreign up-cycling brands. In addition, after tracking how leather is discarded and accumulated as waste and then collecting the discarded leather, the properties of the material were analyzed. A study of Korean motifs was followed by the concept summary, and upcycling design expressions that exemplify Korean images were identified. The following two novel methods were used to create six up-cycled bags using collected discarded leather. First, lucky bags and moon pots were selected from various Korean motifs in order to use motifs with identifiable features. Secondly, different variations of cutting and attachment methods were used, including iron mold production methods and presses.

• 한국컴퓨터정보학회논문지
• /
• 제26권3호
• /
• pp.29-34
• /
• 2021

4차 산업혁명 시대의 도래와 함께 IT기술은 기존의 다양한 산업과 분야에 융합되어 기존에 없던 새로운 서비스들을 만들어내고 있다. 특히 인공지능 분야의 챗봇과 최신 기술은 자연어처리 기술의 발전과 함께 그 성능이 비약적으로 발전하여 다양한 업무처리를 챗봇을 통해 처리하고 있다. 본 연구는 슬롯필링(Slot Filling) 기반의 챗봇 기술을 통해서 법률 질의에 대한 구조적인 폼(Structual Form)을 만들고 정해진 형태의 질문을 입력하여 사용자가 찾고자 하는 질문에 근접한 답변을 제공하는 시스템에 대한 연구이다. 제안 시스템을 이용하여 텍스트 형태의 비정형 데이터인 법률 정보를 보다 구조화된 형태로 질의응답 데이터를 구축할 수 있다. 또 축적된 질의응답 데이터를 하이브(Apache Hive)와 같은 빅데이터 저장 시스템을 통해 관리하여 학습에 데이터를 재활용하는 것으로 응답의 신뢰성을 지속적 향상을 기대할 수 있다.