• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.163.3-163
• /
• 2001

This paper presents the two-step strategy method of performing optimal scheduling of paper mill processes using MINLP (Mixed-Integer Non-Linear Programming) considering the trim loss problem in sheet cutting processes. The mathematical model for a sheet cutting process in the form of MINLP is developed in this study, and minimizing total cost is performed considering the cost of raw paper roll, :hanging cutting patterns, storage of over-product and recycling/burning trim. The paper has been used to deliver and conserve information for a long time, and it is needed to have various sizes and weights ...

• Resources Recycling
• /
• v.8 no.5
• /
• pp.34-43
• /
• 1999

An elecmc arc cracking reaclor is developed for the productiol~o f ieusuble fuel gas by the thennal destruction of waste oil. The churaclensucs of product gas and ~esiduesf rom arc crachng of wnste lubr~cat~nogil are sludird. Thc product gas is mainly coruposcd of hydrogen 135-4076), acetylene (13-4076), ethylene 13-476) and olher hgdrocnrbons. The contenr of carbon monomde, one or the main product in a conventional low-temperature Lhennal cracking umt, 1s very slnvll in lhis atc cracking expcnmcnt. Total calocctic wlue of product gas shows 11,000-13.000 kcizlkg, which is hiph cnough to use as a ~ L I I I Cga~ s . and the concentralions oC loxic gases arc well below the rcguliltury emission critena The GCIMS analysis of llquld-phase residues shows that the high rnalccular welgllt hydrocilrbons in the waste oil arc cracked into the low malecular weight hydrocarbons snd hydroem,. The dehydrogcnntion is found lo be Lhe main cracking rcacuon due lo the high temperalure ~ ~ ~ d ubcyc edle ctric arc. The average parucle size of soot as the solid-phase residue is 10 3 wm, and the conlents of cabon a ~ hdea vy metals are abovc 60% and under 0.01 ppm, respecttrely. Thc utllizvtion or sool, as industl-id1 rcsource seems lo he reasible aIter refimng.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.2
• /
• pp.33-40
• /
• 2011

This study was conducted for the purpose of examining stable disposal of foodwaste and possibility of multilateral use of its by-product by mixing earthworm powder and by-product generated from food waste disposal for making feed for sea fish. As a result of the study, content of crude protein (25.93%, 69.72%), crude lipid (16.91%,6.39%) crude ash (15.38%, 5.30%) in by-product of food waste and earthworm powder was higher than that in fish meals manufactured in the country, and it was judged that it is available to make good feed as a source of fatty acid as it contained C18:1n9c, 1n9t and c16:0. As for stability as a raw material for feed, it was shown that the stability was high when using the product as a raw material for feed not exceeding the standard of test items, and though change of content and ingredients to mixing ratio, it was shown that mixed specimen of fertilizer (S6) was higher, showing that it has great utilization in the future. Also, as it has more content of registered ingredients than any other raw materials for feed manufactured in the country, it is possible to be used as a substitute when manufacturing feed for sea fish. Therefore, it is judged that various studies such as economic analysis and technology of possible manufacturing will be needed in the future.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.5-6
• /
• 2015

This study is to development of inorganic insulation material using by-product materials. The organic material is due to toxic gas emission, when a fire occurs. And it has lower water resistance. The inorganic material is heavy and worse thermal performance than organic materials. In this study, cullet and fly ash were used as basic materials in order to secure a recycling technology of by-products which was mostly discarded and reclimed, and measure of physical properties of Inorganic foam material.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.99-104
• /
• 2001

Slag product has the possibility as alternative aggregate and sand under the circumstance of natural resource shortage. Copper slag is the by-product produced in process of copper industry. Recycling the slag in construction industry could give positive effects on the environmental preservation. This study presents that the fundamental properties of high strength concrete which used copper slag as alternative sand. Testing factors are concrete's slump, bleeding, air contents and compressive strength. The results of this study are as follows. (1) Mixing of W/C 30%, substitution rate 25% shows the best slump. As substitution rates are going up, concrete slump is uprising and air contents are downsizing. (2) The bleeding of concrete becomes more serious as substitution rates are going up. (3) The best compressive strength of copper slag concrete is achieved in mixing of W/C 30%, substitution rate 25%.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.1015-1020
• /
• 2002

Recycling of coal combustion by-product(Ash) are becoming more improtant in the utilization business as a result of the increased use of NOx reduction technologies at coal-fired power plants. Current disposal methods of these by-products create not only a loss of profit for the power industry, but also environmental concerns that breed negative public opinion. This research made Precast block for environment-friendly secondary product and compare strength special quality of this block with existent common use brick and analyze application possibility in situ with a reserve experiment that measure strength property and manufacture method to handle coal ash produced in Bo-ryung thermoelectric power plant.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.317-322
• /
• 2002

In modern times, the environment preservation is global tendency and self social awareness is arise. Measures to the environment preservation and pollution is going on study. One measure is recycling and reuse of by product and it is already developed in some advanced country. There is 7 hundred thousand tons of copper slag production from copper refining process in domestic. The purpose of this study is reusing copper slag -by product which produced L cooperation in domestic-as fine aggregate for producing high strength concrete and investigating the fundamental characteristics.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.625-629
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS (Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.452-459
• /
• 2008

The compressed injection yellow ocher soil is the process-technology by drying the product through sunshine, not by firing like pottery and ceramic ware. It is the technology of development being able to achieve the far infrared ray and humidity adjustment by adding recycling paper, Korean paper and bamboo salt, and it corresponds with the construction enforcement ordinance 2007 as an interior-finishing product which is fire-resistant. In case that the yellow ocher soil would be used as lighting device and interior-finishing material and decoration, it could contribute to an improvement of National Health by avoiding the sick house syndrome and adding humidity adjustment, and it has more efficient economic effect due to using recycle-available additives. Through such developments of the yellow ocher soil products the domestic market of lighting device and construction material can be advanced and the replacement effect of imported goods & also export effect can be expected accordingly.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.05a
• /
• pp.225-239
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS(Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.