• 제목/요약/키워드: Recycle Plastic

검색결과 67건 처리시간 0.029초

Discussion of Current Resource Recycling Policy in Taiwan

  • Chen, Shiao-Shing;Chang, Tien-Chin;Huang, Cheng-Yi
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.675-679
    • /
    • 2001
  • The research is to discuss the current resource recycling and recovery policy, which was enacted by Environmental Protection Administrative (EPA) in Taiwan. For the past few years, the solid waste generated in Taiwan has greatly increased about 5 % per year. In addition to the construction of landfill sites and incineration plants, 4 R techniques (Reduction, Reuse, Recycle and Recovery) were also publicized among the citizens and then promulgated to furthermore manage these increased solid waste. Although the regulations have been carried out to a great success, they still need to be revised and updated since solid waste contains varieties of different materials. Therefore, this research discusses the current regulation and makes suggestion for future regulation revision. From the results of this study, energy recovery was suggested to be emphasized in the regulation. Energy could be recovered from materials such as waste tires, and all kinds of plastic containers. Waste tires and most of the plastic containers made of hydrocarbon species, which contains great heating values, should be considered as one of the alternatives for the resource recycling.

  • PDF

Development of Eco Burner Ash Melting Furnace System

  • Sekiguchi, Yoshitoshi;Hamabe, Kohei;Momoda, Shigeru
    • 한국자원리싸이클링학회:학술대회논문집
    • /
    • 한국자원리싸이클링학회 2001년도 정기총회 특별강연 및 춘계학술연구발표회(2)
    • /
    • pp.19-22
    • /
    • 2001
  • In recent years, the creation of waste recycling society has been required to cope with the traditional ways of waste treatments. In accordance with the package recycling law in force, calls for the developments of new waste treatment techniques suitable for 21st century are growing higher. A new ash melting furnace system named Eco Burner Ash Melting Furnace System has been developed. It is a burner type ash melting system in which the fluffs made of the plastics segregated from municipal solid wastes are directly fired at high temperature in the furnace. This system provides an economical ash melting system because plastic wastes or paper scraps that have heretofore been considered hard to recycle are used in compensation for fossil fuel. In this paper, we describe the ash melting test results obtained from a substantiative facility.

  • PDF

엘라스토머 재생재의 사출성형시 유동성과 경도 (The Fluidity and Hardness of the Recycled Thermoplastic Elastomer in the Injection Molding process)

  • 노병수;정영득
    • Design & Manufacturing
    • /
    • 제1권1호
    • /
    • pp.39-44
    • /
    • 2007
  • In recent, recycling of plastic material has became a major issue due to the landfills and environmental problem. This study investigated fluidity and hardness of thermoplastic vulcanizate(TPV), which is used for automobile component parts such as weather strip in order to replace ethylene propylene rubber (EPDM). So, using the spiral flow test mold, we conducted an experiment on fluidity and hardness of TPV according to injection molding conditions. As results of injection molding experiment, the recycled TPV's flow length was a little bit longer than virgin TPV and the hardness was decreased in case of using the recycled resin. Also, we investigated the morphology study by SEM photo.

  • PDF

재사용 및 재활용에 적합한 환경가구디자인에 관한 연구 - 마네킹(Maneking)을 이용한 스트리트 퍼니처(Street Furniture) 디자인을 중심으로 - (A Study on the Recycle and Reuse Suitability Environmenttal Furniture Design - Design Of Street Furniture with Maneking -)

  • 이민호
    • 한국가구학회지
    • /
    • 제17권1호
    • /
    • pp.47-54
    • /
    • 2006
  • This study focused on designing environment-friendly furnitures by recycling useless stuffs. I designed environment-friendly furnitures by using plastic manekings, which do not decay easily. Designing environment-friendly furnitures by using maneking, we should consider the following; to make our surrounding comfortable and pleasant, to make the appearance of the streets more beautiful, and to consider our future environment. We need to use reusable and recyclable wastes much more to make environment-friendly furnitures from now on.

  • PDF

국내외 바이오 플라스틱의 연구개발, 제품화 및 시장 동향 (International Trends in Development, Commercialization and Market of Bio-Plastics)

  • 유영선;오유성;홍승회;최성욱
    • 청정기술
    • /
    • 제21권3호
    • /
    • pp.141-152
    • /
    • 2015
  • 환경문제가 대두되면서 이미 선진국의 바이오 플라스틱 공급업체들은 소비자의 관심과 재활용 규제가 친환경 포장재 등의 수요를 불러일으킬 것으로 전망하였다. 이러한 수요에 대응하기 위해 옥수수와 같은 식물체를 활용해 만든 여러 형태의 바이오 플라스틱을 출시해 왔으며, 국내 업체들에서도 점차 이에 대한 관심을 높여가고 있다. 점차 강화되고 있는 폐기물 부담금과 불안정한 국제 유가를 고려할 때, 바이오 플라스틱은 소비자들의 친환경 제품에 대한 관심과 연결되어 국내 플라스틱 산업의 새로운 활로가 될 것으로 기대된다. 이를 위해서는 비교적 초기단계에 있는 국내 친환경 바이오 플라스틱 기술에 대해 기업과 대학에서 활발한 연구가 이루어져야 할 것으로 보인다. 빠르면 2-3년 내에 기존 생분해 플라스틱 이외에 바이오 베이스 및 산화생분해 플라스틱을 주원료로 한 식품용기 및 포장재, 산업용품, 농업용품, 일회용품, 산업용랩, 스트래치 필름 및 각종 상품용 제품이 실용화되고, 장기적으로는 생체 의료용제 등과 같은 첨단의 고부가 생명 공학기술을 응용한 다양한 종류의 환경 친화 제품의 출시가 예상되며, 향후 바이오 플라스틱 산업은 시장 잠재력과 성장성이 무한한 환경 관련 사업으로 평가된다.

폐 일회용 기저귀의 유용 성분 회수를 위한 해리조건 연구 (Studies on the Pulping Conditions of Separating Useful Components from Disposable Diaper Waste)

  • 이태주;최도침;남윤석;조준형;이호선;류정용
    • 펄프종이기술
    • /
    • 제47권2호
    • /
    • pp.1-8
    • /
    • 2015
  • Disposable diaper has been used in order to handle urine and feces conveniently. At present the amount of disposable diaper waste increases gradually. Incineration and landfill have been the only ways to dispose of disposable diapers. However, if they are disposed by landfill, decomposition will take more than one hundred years. In addition, another way of dispose incineration has caused air pollution. Therefore, it is necessary to study recycling process for disposable diaper since plastic and wood fibers of diaper are useful materials to recycle. In this study, pulping condition of disposable diaper waste was studied in order to effectively separate the components. Recovery rates of plastic and fibers were analyzed under different pulping conditions. It was found that optimum pulping consistency was 5%, time was 60 minutes, temperature was $50^{\circ}C$, and cut size is $21cm{\times}21cm$. The recovery rate of plastic and fibers can be achieved above 70% under the optimum pulping condition.

폐플라스틱의 열화학적 재활용 기술 국내 동향 (Domestic Trends in Thermochemical Recycling Technology of Waste Plastics)

  • 노선아;민태진;김진태;한방우
    • 자원리싸이클링
    • /
    • 제32권6호
    • /
    • pp.79-89
    • /
    • 2023
  • 최근 탄소 중립 이슈와 함께 가장 많은 조명을 받고 있는 환경 문제로는 폐플라스틱 처리 문제가 있다. 폐플라스틱의 재활용 기술 중에서도 고온의 조건에서 유기물을 전환하여 원료 및 에너지로 재활용하는 열화학적 재활용 기술은 그동안 폐플라스틱에 주로 이용되어 왔던 물질재활용의 한계를 넘어선 기술로 평가 받고 있다. 열화학적 재활용 기술은 폐플라스틱을 원래 플라스틱의 원료로 재순환할 수 있는 순환경제의 핵심 기술로 부각되고 있으며 후속공정 및 최종 생산품의 활용 방법에 따라서 원료(Chemical recycling) 및 에너지(Waste to energy)로 재활용이 가능한 장점을 가지고 국내 뿐 아니라 세계적으로 주목을 받고 있다. 본 논문에서는 열화학적 재활용의 대표적인 세가지 기술인 연소, 가스화, 열분해에 대하여 살펴보고 최근 주요 기술 동향을 제시하고자 한다.

국내 기업들의 폐기물자원 순환에 따른 탄소배출량 및 경제성 분석 (Economic Analysis and CO2 Emissions Analysis by Circulating the Industrial Waste Resource between Companies)

  • 김영운;김준범;황용우;박지형
    • 청정기술
    • /
    • 제18권1호
    • /
    • pp.111-119
    • /
    • 2012
  • 오늘날 기업들에서는 폐기물을 감량화, 재활용, 재이용하기 위해 노력하고 있다. 폐기물이 재활용되고 있지만, 많은 폐기물이 소각 또는 매립되고 있다. 이러한 문제를 해결하기 위하여, 산업단지를 중심으로 폐기물을 재활용하기 위한 다양한 사업이 진행 중이다. 하지만, 폐기물 재활용에 대한 정보의 부족으로, 재활용가능 폐기물은 여전히 소각되거나 매립되고 있다. 이러한 배경 하에, 본 연구는 기업의 폐기물을 원료로 재활용하는 폐기물 자원순환에 의해 저감되는 탄소배출량과 경제성 평가방법을 제시하고자 한다. 그 평가방법을 적용하여 폐합성수지와 폐유기용제의 자원순환사례를 평가하였다. 재활용과 소각 측면에서 환경적 및 경제적인 측면을 분석하였다. 폐플라스틱을 원료로 재이용함으로써, 탄소배출량은 2009년에 1,0705톤, 2010년에 1,234톤이 저감되었으며, 비용은 2009년에 6.57억원, 2010년에 7.55억원이 저감되었다. 폐유기용제를 재활용 할 시에는 2010년에 7.3톤, 2011년 5.6톤의 탄소배출량이 저감되었으며, 비용은 2010년에 1,591만원, 2011년에 1,218만원이 저감되는 것으로 나타났다.

잔류유분 함유 반출처리토 재활용을 위한 호밀 식재 식물상 토성회복 가능성 (Phyto-restoration Potential of Soil Properties using Secale cereale for Recycle of Soils with Residual TPHs (Total Petroleum Hydrocarbons) after Off-site Treatment)

  • 박지은;배범한;주완호;배세달;배은주
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제19권3호
    • /
    • pp.25-32
    • /
    • 2014
  • The amount of TPH contaminated soil treated at off-site remediation facilities is ever increasing. For the recycle of the treated-soil on farmlands, it is necessary to restore biological and physico-chemical soil characteristics and to remove residual TPH in the soil by an economic polishing treatment method such as phytoremediation. In this study, a series of experiments was performed to select suitable plant species and to devise a proper planting method for the phyto-restoration of TPH-treated soil. Rye (Secale cereale) was selected as test species through a germination test, among 5 other plants. Five 7-day-old rye seedlings were planted in a plastic pot, 20 cm in height and 15 cm in diameter. The pot was filled with TPH-treated soil (residual TPH of 1,118 mg/kg) up to 15 cm, and upper 5 cm was filled with horticulture soil to prevent TPH toxic effects and to act as root growth zone. The planted pot was cultivated in a greenhouse for 38 days along with the control that rye planted in a normal soil and the blank with no plants. After 38 days, the above-ground biomass of rye in the TPH-treated soil was 30.6% less than that in the control, however, the photosynthetic activity of the leaf remained equal on both treatments. Soil DHA (dehydrogenase activity) increased 186 times in the rye treatment compared to 10.8 times in the blank. The gross TPH removal (%) in the planted soil and the blank soil was 34.5% and 18.4%, respectively, resulting in 16.1% increase of net TPH removal. Promotion of microbial activity by root exudate, increase in soil permeability and air ventilation as well as direct uptake and degradation by planted rye may have contributed to the higher TPH removal rate. Therefore, planting rye on the TPH-treated soil with the root growth zone method showed both the potential of restoring biological soil properties and the possibility of residual TPH removal that may allow the recycle of the treated soil to farmlands.

진동제어 콘크리트 개발에 관한 실험적 연구(I) (Experimental Study for the Development of Vibration-Controlled Concrete (I))

  • 정영수;이대형;최우성
    • 콘크리트학회지
    • /
    • 제8권5호
    • /
    • pp.123-133
    • /
    • 1996
  • 최근의 각종 사회시설의 확충에 따른 건설공사 및 교통시설 등은 많은 진동을 유발하여 사회적인 문제를 야기하고 있는 실정이다. 본 연구는 각종 제진재료를 이용하여 진동을 억제할 수 있는 콘크리트를 개발하여 각종 건설공사에서 흔히 발생할 수 있는 진동공해문제를 억제하고자 하며 아울러 폐기물의 재활용차원에서 폐자재를 이용하여 유용한 제진콘크리트를 개발하고자 하는데 그 목적이 있다. 우선, 제진재료를 이용한 압축강도 200kg/$\textrm{cm}^2$ 이상의 콘크리트 배합비를 찾기 위하여 Pilot실험을 수행하였으며, 선정된 적정배합비에 다른 진동시험제를 제작하여 재료의 동적특성 즉, 1차공명진동수, 동탄성계수 및 감쇠비를 측정하여 제진효과를 조사하였다. 제진재료로서는 Foam, Latex, Rubber Powder 그리고 Plastic Resin 등을 사용하였으며 진동의 감쇠효과가 있는 것으로 나타났다. 실험방법으로는 KS F 2437 규정과 진동파의 속도법을 사용하였으며, 감쇠비 측정은 Frequency Response Spectrum 곡선에 대한 Polynomial Curvefitting방법과 기하학적 해석방법을 이용하여 각각의 결과를 비교.분석하였다.