• Clean Technology
• /
• v.18 no.1
• /
• pp.111-119
• /
• 2012

These days many companies are trying to reduce, recycle and reuse their wastes. Even though many wastes can be recycled, those are incinerated or landfilled. To solve these problems, there are many projects to make efforts to recycle wastes in especially the industrial complexes. But, due to the absence of information about waste recycling, recyclable wastes are still incinerated or landfilled. Based on these research background, this study aims to suggest the evaluation methodology of the $CO_2$ emissions and cost reduced by circulating the industrial waste to resource. We evaluated the environmental and economic effect between companies which emit the plastic waste and organic solvent waste and use them as raw-materials in the off-line recycling information exchange network. The environmental and economic aspects were analyzed comparing waste recycling with waste incineration. By recycling the plastic waste as raw-materials, $CO_2$ emission were reduced 1,070 ton in 2009 and 1,234 ton in 2010 and 657.4 million won in 2009 and 755.0 million won in 2010 were reduced. In recycling the organic solvent waste, 7.3 ton-$CO_2$ in 2010 and 5.6 ton-$CO_2$ in 2011 were reduced and 15.9 million won in 2010 and 12.2 million won in 2011 were reduced.

• Resources Recycling
• /
• v.10 no.3
• /
• pp.3-13
• /
• 2001

The Korean Auto industry has developed remarkably over the past 30 years. In 2000 alone, Korea produced 3.11 million vehicles, and the number of vehicles registered surpassed the ten million mark. As the number of vehicles registered in Korea has increased, yew after you, a rising number of cars have been scrapped. In 2000, a total of 455,592 automobiles were scrapped, up dramatically from only 101,158 in 1989. The system for handling of ELV(End-of-Life Vehicles) in Korea is governed by the "Motor Vehicle Control Act". The Act places the responsibility for vehicle scrapping directly on the vehicle owners. h vehicle owner can only can eel a vehicle registration after he gets a certificate from an authorized vehicle dismantler showing that his vehicle was properly scrapped according to the law. The take-back rate of ELV reaches nearly 100% in Korea. The vehicle scrapping process in Korea is very similar to those in other countries. fluids such as fuels and oils are first removed, and recyclable parts are collected and separated. Engines and transmissions are dismantled and recycled for use as raw material. Plastics, which are not easily reused, are generally treated as industrial wastes. The "Motor Vehicle Control Act" prohibits reuse of certain parts in order to guarantee the safety of the used auto parts. However, some restrictions on the reuse of auto parts have recently been eased to promote recycling. In this paper, additionally, car recycling policy of the foreign countries such as Japan, Germany and EU were reviewed.

• Journal of Environmental Health Sciences
• /
• v.39 no.5
• /
• pp.418-425
• /
• 2013

Objective: This study was carried out for the purpose of identifying major substances contributing to the production of odor and evaluating the characteristic of odors. Methods: Complex odor and 17 odorous compounds were measured at 18 waste transfer stations located in Seoul. Results: The dilution ratio value of complex odor ranged from 4 to 30 times in the boundary layer of 18 waste transfer stations. At 6 measurement points among the 18 waste transfer stations, the dilution ratio values exceeded standards (15 times). When the results were evaluated in terms of their contribution to the formation of malodor, the patterns indicated that the highest concentration values in the residential waste disposal process were of i-valeraldehyde and acetaldehyde, while butyraldehyde and acetaldehyde accounted for a large proportion of odorous compounds from the waste recycling process. Conclusions: It was found that butyraldehyde and acetaldehyde were the primary compounds released from the food waste disposal process. Overall, aldehyde compounds were the greatest contributor to detectable odor intensity emitted at the waste transfer stations.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.80-83
• /
• 2001

According to the EPA in Taiwan report, 9.05 million metric tons of solid wastes were generated in 1999, and the waste glass was accounted of 4.95 percent. However, with the increasing tonnage of disposal cost and existing disposal sites are reaching full capacity, recycling is currently accepted as a sustainable approach to waste management. Therefore, it's essential and urgent that the government in Taiwan establish the recycling and recovery framework for the minimization of the solid waste, reduction of materials and energy consumption, and the encouragement for the reuse, recycle and recovery development. To achieve this Boal, Taiwan has been strived for a long period of time in waste glass recovery and recycle. Waste glass, unlike other kinds of resource waste, is 100% recyclable. The EPA in Taiwan now center on a lot of different kinds of waste glass, such as glass container, flat glass, CRT glass, windshields glass, fluorescent lamps, and waste pesticide glass container. This article will focus on the framework of the recycling market access, and also try to provide some strategies to improve waste glass recycling efficiently.

• Journal of Environmental Health Sciences
• /
• v.19 no.4
• /
• pp.51-58
• /
• 1993

The integrated solid waste management for Seoul Metropolitan city can be established on the basis of the following hierarchy of priorities: 1. Efforts for source reduction should be propelled by both government and citizens to achieve the effects of resource conservation. The adequate production and consumption which are environmentally amenable and sustainable can be induced by the reasonable imposition of deposit money for waste treatment to one-time use products. To accomplish source reduction effectively, the induction of legal and institutional regulation of producer and consumer participation is requisite. 2. For resource recovery, wastes generated should be recycled as far as practicable. Community residents are responsible to separate discharge, the authorities concerned have responsibility of separate collection, and recycling industry should be assissted through tax reduction and financing. Resource separation facilities can be constructed at Kimpo Metropolitan landfill site for wastes not separately collected due to some unavoidable circumstances. 3. Garbage should be composted. Garbage is uneconomical for incineration, because it has high moisture content and low calorie, thus there is no reason for the incineration of garbage even though garbage is classified into combustibles. Composting facilities can be located at sites which are not densely populated and easily accessible to transportation, for example, Kimpo Metropolitan landfill site. Compost produced can be managed by the authorities for the use of fertilizer to a green tract of suburban land and farms. 4. Nonhazardous combustible wastes not recyclable can be utilized for thermal recovery at the incinerators which are completely equipped with pollution control devices. According to the trend of local autonomy and the equity principle of local autonomous entities, incineration facilities of minimal capacity required can be constructed at each districts of Seoul Metropolitan city which have organized local assembly. In case of Yangcheon district, the economically combustible waste quantity is about 260 tons/day which exceeds 150 tons/day, the incineration capacity of existing facility. But, from now on, waste quantity can be reduced substantially by the intensive efforts of citizens for source reduction and recycling and the institutional support of administrative organizations. Especially, it is indispensable for the government to constitute institutional and technological bases that can recycle paper and plastics form 43% of waste generated. A good time for constructing of incineration facilities for municipal solid waste can be postponed to the time that pollution control technologies of domestic enterprises are fully developed to satisfy the standards of air pollution prevention, because the life expectancy of Kimpo Metropolitan landfill site is about 25 years. Within this period, institutional improvements and technological advancements can be attained, while the air qual. ity of Seoul Metropolitan city can be ameliorated to the level to afford incineration facilities. 5. For final disposal, incombustibles and ash are landfilled sanitarily at Kimpo Metropolitan landfill site.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2786-2793
• /
• 2009

Recently, the development and spread of the new recyclable energy becomes urgent because of the depletion of fossil fuel and strengthening the environmental regulation. To recovery from the waste out of the many new recyclable energies has been proved as the most favorable when the potential value of energy source is compared. The RDF from the waste has been approved as the most economical method out of the other methods. However, the toxic gases (HCl, Dioxin etc) and heavy metals generated during the burning of the industrial wastes have been pointed out as problems. The PVC, alkali metal chloride, and alkaline earth metal chloride are major materials for emitting the chlorine and chlorine compounds have the problem such as the erosion on the heat collection device. This research has analyzed the heavy metal components containing in the industrial waste, and the concentration of Cl and S in the industrial waste generated in B industrial complex are slightly high than that of the A industrial complex. The results can be used to discuss the origin of inorganic components in industrial waste and utilized as a base data to improve the performance of the RDF as fuel.

• Steel and Composite Structures
• /
• v.35 no.5
• /
• pp.627-634
• /
• 2020

The past years were marked by an increase in the use of wood waste in civil and mechanical constructions. Date palm waste remains also one of the most solicited renewable and recyclable natural resources in the composition of composite materials. In Algeria, a great amount of this type of plant wastes accumulates every year. In order to make use of this waste, a new wood-epoxy composite material based on date palm petiole particleboard is developed. It makes use of date palm petiole particleboard as reinforcement and epoxy resin as matrix. The size of the particles reinforcement are between 1~3 mm and proportion of reinforcement used is 37%. In this work, experimental and numerical studies are conducted in order to characterize the wood fibre-epoxy plates. Firstly, experimental modal analysis test was carried out to determine Young's modulus of the elaborated material. Then, in order to validate the results, compression test was conducted. Furthermore, additional information about the shear modulus of this material is obtained by performing an experimental modal analysis to extract the first torsional mode. Moreover, a finite element model is developed using ANSYS software to simulate the vibration behaviour of the plates. The results show a good agreement with the experimental modal analysis, which confirms the values of Young's modulus and shear modulus.

• Korean Institute of Interior Design Journal
• /
• v.26 no.2
• /
• pp.83-91
• /
• 2017

This study was conducted by the awareness that although interior spaces using the techniques and characteristics of assemblage are excellent means to reveal distinctiveness and identity with preeminent originality which are different from other spaces, there are few domestic studies and literatures on them. The results analyzed by preceding studies and cases on the characteristics of expression of assemblage which appear in the interior spaces of commercial areas can be summarized as follows; First, assemblage expresses identity of spaces with symbols capable of multiple interpretations through the method of integration and repetition of the materials used. Second, it strongly reminds visitors of memories on spaces by producing odd and unfamiliar scenes with such designs as installation art. Third, when it uses ordinary materials, it adds combination, integration, transformation or colors to the materials for extraordinary traits. Fourth, it pursues sustainability through recycling or upcycling by using wastes or natural materials. Fifth, in order to express materials to fit the purposes of spaces, it formulates outcomes with intentional plans. To sum up above analysis results, expressions of assemblage which appear in modern commercial spaces are characterized by expression of symbols with multiple meanings, purse formativeness which fit the purposes and meanings of spaces, play the role of reminding memories on places by producing extraordinary spaces with strangeness and unfamiliarity such as installation art and sometimes show sustainability by using recyclable materials. The results of this study are expected to be utilized as reference materials which suggest directions of approach to interior spaces through assemblage techniques and materials which can be used in various design terms by domestic designers.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.4
• /
• pp.174-181
• /
• 2021

Lightweight geopolymers were fabricated by using IGCC (integrated gasification combined cycle) slag and Si sludge which are classified as general wastes (recyclable resources). Three curing methods were tried to investigate the changes in compressive strength and density according to the curing method and immersion time. Immersion period was tried up to 21 days to observe long-term performance in water. Compressive strength of the specimens cured in oven decreased abruptly with an increase in immersion time. Compressive strength of the specimen cured in autoclave was low after 3 and 7 day immersion; however, increased rapidly after 21 day immersion. On the contrary, compressive strength of the specimen cured in autoclave and oven was high but substantially decreased after 21 day immersion. Conclusively, it was speculated that oven curing is effective for the compressive strength development at early age; however, autoclave curing is more desirable for the long-term performance in water.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.63-71
• /
• 2009

Recyclable wastes coming into material recovery facilities(MRFs) is mostly packed by plastic bag or sack bag. Bag rupturing device is essential to improve capacity and efficiency of MRFs. Bag opening works of MRFs is mostly done by numerous workers and shredder-type bag rupturing device. It often makes a problems; decreased capacity, shredded recyclables, worker safety by explosion and broken glasses, etc. In the present work, bag rupturing device with octagonal rotating blade drums has been developed to solve the existing problems and environment assessment is also performed during operation of the device. Capacity of the device was about 5.6 ton/hr at 8.2 rpm of drum revolution speed and 1.25 m/min of belt conveyor speed. It satisfied initial designed capacity(5.0 ton/hr) and max. capacity 8.8 ton/hr was achieved at 12.5 rpm of drum revolution speed and 1.50m/min of belt conveyor speed. Bag rupturing efficiencies on outer and inner bag were obtained at 100% and about 95.6% as average, respectively and original form of glass bottles in the bag was maintained without broken by about 96.5%. This result shows that the safety in hand sorting by the workers could be improved. As result of environmental assessment on the noise, vibration and particulates, the measured levels on noise, vibration and particulates show the below standard regulatory limits. It could be concluded that the problems of existing devices in MRFs could be solved by adopting the bag rupturing device with octagonal rotating blade drums in on-site operation.