• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 춘계학술대회 학술발표 논문집 제14권 제1호
• /
• pp.495-498
• /
• 2004

In this paper, passive telemetry capacitive humidity sensor system using a RLSE(Recursive Least Square Estimation) technique Is proposed. To overcome the problem like power limits and complications that general passive telemetry sensor system including IC chip has, the principle of inductive coupling is applied to model the sensor system. Specially, by applying the forgetting factor, we show that the accuracy of its estimation can be improved even in the case of time varying parameter and also the convergence time can be reduced.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.170-175
• /
• 1992

A leak detection method for diagnosis of the leak position in a pipeline was developed using an estimation theory with the assumption that the measured flow rates and pressures are stochastic processes. A notch filter was designed using power spectral density analysis of measurements to reduce the effects of disturbances. The noise model dimension was determined by hypothesis testing and then recursive extended least square method was applied to estimate the leak position in real time. The proposed method was applied to an experimental system for evaluation of its performance.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.985-990
• /
• 2013

This paper proposes a novel fault diagnosis scheme using parameter estimation of the stator resistance, especially in the case of the open-phase faults of PMSM drives. The stator resistance of PMSMs can be estimated by the recursive least square (RLS) algorithm in real time. Fault diagnosis is achieved by analyzing the estimated stator resistance of each phase according to the fault condition. The proposed fault diagnosis scheme is implemented without any extra devices. Moreover, the estimated parameter information can be used to improve the control performance. The feasibility of the proposed fault diagnosis scheme is verified by simulation and experimental results.

• Smart Structures and Systems
• /
• 제8권4호
• /
• pp.367-384
• /
• 2011

This paper presents the design and experimental evaluation of fast output sampling feedback controller to minimize structural vibration of a cantilever beam using Shape Memory Alloy (SMA) wires as control actuators and piezoceramics as sensor and disturbance actuator. Linear dynamic models of the smart cantilever beam are obtained using online recursive least square parameter estimation. A digital control system that consists of $Simulink^{TM}$ modeling software and dSPACE DS1104 controller board is used for identification and control. The effectiveness of the controller is shown through simulation and experimentation by exciting the structure at resonance.

• 전자공학회논문지S
• /
• 제34S권7호
• /
• pp.66-77
• /
• 1997

This paper presents an automatic tuning method for parameters of a multivaiable self-tuning velocity-type PID controller which adapts to changes in the system parameters with time delays and noises. The velocity-type PID control structure is determined in the process of minimizing the variance of the auxiliarly output, and self-tuning effect is achieved through the recursive least square algorithm at the parameter estimation stage and also through the Robbins-Monro algorithm at the stage of optiminzing the design parameters of the controller. The proposed PID type multivariable self-tuning method is simple andeffective compared with other esisting multivariable self-tuning methods. Computer simulation has shown that the proposed algorithm is beter than the trial-and-error method in the tracking performance.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1993년도 학술논문발표회 논문집 제12권 1호
• /
• pp.75-79
• /
• 1993

본 논문에서는 변화가 심한 음원파형을 추정하는 새로운 순차처리 알고리듬을 제안한다. 먼저, 1) 기존의 순차처리 분석법중 대표적인 분석법인 RLS(recursive least square)의 문제점들을 검토하고, 2) 이를 개선하기 위해서 관측행렬(observation matrix)을 최적차수의 SVD(reduced-rank singular value decomposition)로 재구성하고, 3) 이에 견실개념(robustness concept)을 적용해서 최적의 성도변수(vocal tract parameter)를 찾아내고 역필터를 적용해서 음원(voice source)을 효과적으로 구분해낸다. 본 논문에서 제안된 방법으로 음원을 추정할 경우, 변화가 심한 음원파형을 잘 추정할 수 있으며, 음원의 특성을 구분해낸 성도 파라미터도 효과적으로 추정할 수 있다. 본 연구내용은 음성합성에서 자연성 개선 및 개인성 구현을 위해서 필수적이며, 다양한 형태의 음성을 표현하기 위해 사용되어질 수 있다. 또한, 음성코딩, 화자인식, 음성인식에서도 사용되어질 수 있다.

• 전자공학회논문지B
• /
• 제30B권9호
• /
• pp.122-132
• /
• 1993

In this paper, a self tuning control algorithm is proposed for the high performance drive of DC servo motor, which is adequate to the servo system having frequent load variation. In order to realization of the algorithm, the control system is developed using a fixed point high speed digital signal processor. TMS320C25. Control algorithm is composed of two parts. One is estimation law part using recursive least mean square method, the other is control law part using minimum variance control method. For the purpose of easiness of applying adaptive algorithm, developed control system is based o PC-DSP structure which can develop, debug programs and monitor the dynamic behaviors,etc. Through computer simulation and experimental results, it was verified that proposed control system could estimate system parameters and was robust to the variation of the load and as a result, was adequate to the servo motor drives.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.623-626
• /
• 1991

Crucial to the success of the vector control scheme without speed sensor is up to computing instantaneous position of the rotor flux. In tracing this flux depending on the machine parameter, variations of those factor lead to the non-linear charlcteristic between I/O value and decrease overall efficiency of the vector control scheme. This paper, using recursive least square method estimating instantaneous value of the machine speed and parameter from the shift of current and voltage, proposes an algorithm for compensating the I/O error of the scheme.

• 제어로봇시스템학회논문지
• /
• 제2권1호
• /
• pp.14-20
• /
• 1996

This paper presents a self tuning method of a velocity type PID controller for minimum or non-minimum phase systems with time delays. The velocity type PID control structure is determined in the process of minimizing the variance of the auxilliary output, and self tuning effect is achieved through the recursive least square algorithm at the parameter estimation stage and also through the Robbins-Monro algorithm at the stage of optimizing a design parameter. This method is simple and effective compared with other existing methods[1,2]. Numerical examples are included to illustrate the procedure and to show the performance of the control system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.389-391
• /
• 1994

This paper proposes an approach to control the current amplitude and phase simultaneously. To do this, variable structure control and adaptive parameter estimation arc applied to the current control of a single-phase PWM inverter with unknown R-L series load. The load parameters, R and L, are estimated by using the recursive least square method and these parameters are used to adjust the feedback gains of control input. The inverter system is modelled in a 2nd-order system by treating load current variation caused by inductive component as a disturbance. Simulation and experiment based on the 2nd -order model are done and the results show good dynamic response and low THD.