• 전자공학회논문지A
• /
• 제32A권5호
• /
• pp.14-23
• /
• 1995

A new dual-mode algorithm for blind equalization of quadrature amplitude modulation (QAM) signals is proposed. To solve the problem that the constant modulus algorithm (CMA) converges to the constellation with the arbitrary phase rotation, with the modification of the CMA, the proposed algorithm accomplishes blind equalization and carrier phase recovery simultaneously. In addition, the dual-mode algorithm combining the modified constant modulus algorithm (MCMA) with decision-directed (DD) algorithm achieves the performance enhancement of blind convergence speed and steady-state residual ISI. So we can refer the proposed algorithm to as a scheme for joint blind equalization and carrier phase recovery. Simulation results for i.i.d. input signals confirm that the dual-mode algorithm results in faster convergence speed, samller residual ISI, and better carrier phase recovery than those of the CMA and DD algorithm without any significant increase in computational complexity.

• Journal of Welding and Joining
• /
• 제26권2호
• /
• pp.69-74
• /
• 2008

590MPa grade weldable steels were gas metal arc welded with flux cored wires. Welding parameters such as current, voltage, and speed were varied independently. Effects of each parameter on the strength and chemical composition of weld metal were investigated. Increase of voltage caused decrease of weld metal tensile strength due to the low recovery of alloying elements such as carbon and manganese. On the contrary, increase of current and speed resulted in increase of weld metal strength because of higher recovery of the alloying elements.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.53-54
• /
• 2007

As Cable Network is developing for 2-way high speed data service, it should be developed to transfer high speed data using limited bandwidth. If QAM is using for this, synchronization algorithms become important system parameters. In this paper, we present two methods of coarse timing recovery using CAZAC sequence for cable modem uplink.

• 자원리싸이클링
• /
• 제12권5호
• /
• pp.36-41
• /
• 2003

슬래그는 철분함량이 높아 자원으로의 활용이 가능하나 시장상황에 따라 매립되는 등 재활용이 활발히 이루어지지 않은 실정이다. 따라서 본 연구에서는 슬래그의 재활용이 즘 더 용이하도록 슬래그 내에 존재하는 철분 회수의 중요한 방법인 자력선별 방안에 대하여 고찰하였다. 수재 슬래그, 수냉 전로 슬래그, 공냉 전로 슬래그를 시료로 사용하였고 자장의 세기, 드럼의 회전속도, 슬래그의 투입량에 따른 철분 회수량에 대하여 조사하였다. 철분함량이 적은 수재슬래그는 피더의 진동수 및 드럼의 회전수가 느릴수록 회수율이 증가하였으며 0.5mm 이상의 입도에서 자력선별시 고품위의 철분을 얻을 수 있었다. 수냉의 전로 슬래그의 경우 피더의 진동수가 빠를수록, 드럼의 회전수가 느릴수록 회수율이 증가하는 것으로 조사되었고 입도의 크기가 작아질수록 입도별 회수율이 증가하는 것으로 관찰되었다. 공냉의 전로 슬래그는 피더의 진동수가 낮은 경우 드럼의 회전수가 감소할수록, 높은 경우는 드럼의 회전수가 증가할수록 회수율이 증가하는 것으로 나타났다. 또한 자력선별시 자장의 세기를 증가시키면 회수율은 증가하나 금속철 이외의 철 화합물의 혼입이 많아져 품위가 낮아지는 것으로 관찰되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.487-489
• /
• 2005

This paper proposes a symbol timing recovery method that is simple in structure and can provide high speed symbol synchronization. Transmitter and receiver are not synchronized in communication systems using digital modulation. Receiver should search the timing variation of transmitter continuously. The proposed timing recovery method searches sample position by comparing previous sample value with next sample value. This method can be applied to digital and optical transceivers with high data rate.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.132-143
• /
• 1997

Removal of spilled oil over the sea and the river has become one of the urgent problem in these days. Removing oil using mechanical devices are recommended because chemical dispersion can cause the secondary contamination in the environment. In the present study a series of experiments were carried out to study the effect of working conditions of a belt type skimmer on the rate of recovery for the spilled oil. The oil chosen for the present experiment was diesel oil. Three different situations, namely, upward, downward, up-and-downward pickup have been investigated for various contact angles, belt speeds and oil thicknesses. The results show that the rate of oil recovery for the case of downward pickup with a contact angle of 45.deg. shows the highest among all the conditions. For the removal of spilled diesel oil the optimal belt speed can be found as the critical value to reach the saturated pickup rate for a given oil thickness. The recovery rate of bunker C oil shows 4-6 times higher than that for diesel oil. And the optimal belt speed for bunker C oil can be found less than that for diesel oil for the same slick thickness.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 추계 학술대회
• /
• pp.267-274
• /
• 2006

This paper reports on a study investigating key attributes of service recovery strategies in internet shopping mall. In theses day, service recovery has received important attention in the service operation management literature. Service recovery involves those actions designed to resolve problems, alter negative attitudes of dissatisfied consumers and to ultimately retain these customers. The study examined that service recovery strategies(apology, value added, speed of recovery, empowerment) impact on the customer satisfaction and customer loyalty with SEM(Structural Equation Modeling). This study can be used a strategic implication for internet shopping mall managers to develop successful service recovery strategies.

• 자원리싸이클링
• /
• 제27권1호
• /
• pp.45-54
• /
• 2018

플라이애시의 부유선별 과정에서 교반속도와 공기주입량과 같은 기계적 요소 변화에 따른 영향을 알아보고자 본 연구를 실시하였다. 본 연구에서는 미연탄소 함량이 약 3.4 ~ 3.7% 수준인 화력발전소 플라이애시를 사용하였다. 대표적인 부유선별의 선별 요소인 pH, 교반속도, 포수제 첨가량, 기포제 첨가량 변화에 따른 영향을 살펴보았을 때, Safflower oil을 포수제로 사용하여 첨가량을 800 g/ton, pH 7, 교반속도 1,200 rpm, 기포제 첨가량이 400 g/ton였을 때, 미연탄소 회수율과 미연탄소 함량이 각각 63%, 34%로 나타났다. 이 때 부상물 SEM/EDS 분석을 통해 알아본 결과, 구형의 플라이애시 미립자가 미연탄소 내에 고용되거나, 광액 내에 가라앉지 못하고 기포와 함께 부유함으로써 미연탄소의 함량을 낮추는 것으로 나타났다. 교반속도와 공기주입량과 같은 기계적 요소를 변화시킨 실험에서는 공기주입량 8L/min, 교반 속도 900 rpm에서 미연탄소 회수율 74%, 미연탄소 함량 67%인 것으로 나타났다. 이는 낮은 교반속도와 추가 공기주입으로 인하여 광액 내 와류의 강도가 낮아져, 미립의 플라이애시 입자가 미연탄소와 함께 부유되는 현상을 방지됨으로써, 미연탄소 회수율과 미연탄소 함량이 향상된 것으로 나타났다. 또한, 교반속도와 공기주입량을 각각 800 rpm, 6 L/min으로 설정하였을 때 미연탄소 회수율과 미연탄소 탄소함량이 각각 80%, 70%로 향상되어 가장 우수한 것으로 나타났다.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.324-328
• /
• 2012

A recovered jitter of CDR(Clock and Data Recovery) Circuit based on Dual-loop DLL(Delay Locked Loop) for data recovery in high speed serial data communication is changed by depending on the input data and reference clock frequency. In this paper, 2-step DPC which has constant jitter performance for wide-range input frequency is proposed. The designed prototype 2-step CDR using proposed 2-step DPC has operation frequency between 200Mbps and 4Gbps. Average delay step of 2-step DPC is 10ps. Designed CDR circuit was tested with 0.18um CMOS process.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권2호
• /
• pp.83-88
• /
• 2005

This study investigates the air leakage and heat transfer characteristics of a commercially available rotary-type air-to-air heat exchanger with a fiber polyester matrix. Crossover leakage between the exhaust and supply air is measured using a tracer gas method for various ventilation rates and rotational speeds of the wheel. A correlation equation for the leakage is obtained by summing up pressure leakage and carryover leakage. The pressure leakage is observed to be a function of ventilation rate only, and the carryover leakage is found to be a linear function of wheel speed. The real efficiency of the heat exchanger can be obtained from its apparent efficiency by taking into account the leakage ratio. The heat recovery efficiency decreases, as the ventilation rate increases. As the wheel speed increases, however, the efficiency increases initially but reaches a constant value for the speeds over 10rpm.