• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.300-301
• /
• 2007

In this study, it is investigated that sheet characteristics of high strength steel sheets and effect of springback. High strength steel sheets has got attention in automobile industry of high strength and high formability. Springback is a common phenomenon in sheet metal forming, caused by the elastic recovery of the internal stresses after removal of the tooling. However, the information in deformation behavior of high strength steel sheets, including bending and sheet characteristics and springback, is not enough until now. In this research, the V-bending experiment and analysis have been done to obtain the information of springback of high strength steel sheets. Tensile test for high strength steel sheets was done to got tensile properties of elastic modulus and flow stress of the material. It analyzed springback according to the sheet characteristics with using roll-forming model. FE-Simulation used DEFORM-$3D^{TM}$.

• 한국표면공학회지
• /
• 제17권1호
• /
• pp.1-6
• /
• 1984

The fluidized bed electrode reactor(FBER) with conducting particles has been made use of the removal of metals from dilute electroplating rinse water. The electrolysis was carried out under the conditions of diaphragm current density with 2~28A/$dm^2$ and bed expansion with 20~50%. Recirculating batch operations have been shown that the metal concentration dropped exponentially and may be taken down to 10 ppm. And then, the current efficiency at a concentration of 10 ppm copper was 37% under the conditions of 30% bed expansion and 6 A/$dm^2$, and at concentrated electrolyte (2000ppm copper) was over 80% in the range of 8~28A/$dm^2$ and 20~50% bed expansion. One of the technical possibilities of fluidized bed electrolysis is the separation of copper and nickel from a mixed solution of copper and nickel.

• 한국가정과교육학회지
• /
• 제7권1호
• /
• pp.1-10
• /
• 1995

This study was intended to provide an improved method for testing textiles in high school. Four kinds of test subjects were selected and applied to the classes. Problems of the methods in the textbooks were corrected as follows: 1)Burning test: The number of specimen is reduced to 3 kinds of fibers(cotton, wool, and polyester) and recommends are given to make result by comparing with the burning characteris-tics of paper and hair. 2) Absorbency test: Test Method is changed to drop test. The result is recorded by measuring time required for the water drops absorbed to the specimen. 3) Wrinkle recovery test: A glass is provided instead of metal weight. The method of measuring angle which is made by the specimen is shown in figure. 4) Effects of Detergent: 0.2% of detergent solution is provided before class. The amount of oil and carbon black is specified. Students have generally agreed that the improved methods were better than those in the text-books after they made the above 4 recommendable experiments(p<.001)

• 한국염색가공학회지
• /
• 제14권1호
• /
• pp.18-26
• /
• 2002

Chitosan has reactive amino and hydroxyl groups which can be used to chemically alter its properties under the mild reaction conditions. Thus the cationization of Tencel with Chitosan is effective to modify the fabric. To investigate the modified properties of Tencel fabric, the tests were performed under the several finishing process with enzyme/glutaraldehyde/softener. The internal structure of Tencel which has the structure of cellulose II wasn't changed by enzyme, chitosan and crosslinking agent treatment and the thermal stability was improved by chitosan and crosslinking agent treatment. Wrinkle recovery angle under the dry condition increased highly until $0.1\textrm{mol}/\ell$ of glutaraldehyde concentration, and then decreased. Tensile strength of modified Tencel fabric decreased with increasing of weight loss, but it was improved more or less by chitosan, crosslinking agent and softener. Moisture regain was improved by enzyme and chitosan treatment. And antibacterial activity showed nearly 100% on Tencel fabric treated with 0.5% chitosan and adsorption of metal ion increased with increasing of chitosan concentration.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1489-1498
• /
• 2015

Gallium nitride (GaN)-based power switching devices, such as high-electron-mobility transistors (HEMT), provide significant performance improvements in terms of faster switching speed, zero reverse recovery, and lower on-state resistance compared with conventional silicon (Si) metal-oxide-semiconductor field-effect transistors (MOSFET). These benefits of GaN HEMTs further lead to low loss, high switching frequency, and high power density converters. Through simulation and experimentation, this research thoroughly contributes to the understanding of performance characterization including the efficiency, loss distribution, and thermal behavior of a 160-W GaN-based synchronous boost converter under various output voltage, load current, and switching frequency operations, as compared with the state-of-the-art Si technology. Original suggestions on design considerations to optimize the GaN converter performance are also provided.

• 한국의류학회지
• /
• 제14권2호
• /
• pp.98-103
• /
• 1990

Fibrous adsorbents containing amidoxime group which make chelate complexes with uranyl ions are studied for the recovery of uranium from sea water. Acrylic fibers are used as base Polymer. The adsorption properties of uranium are carried out to examine pH effect, concen-tration dependence, adsorption rate, separation, and chelate complex. The results obtained are as follows; 1. Metal capacity of U (VI) ion is in the range of pH $2\~10.2$. Amidoxime group-containing fiber recover U (VI) ions existed in sea water or waste water in extremely small quantities. 3. Using amidoxime group-containing fiber Cu (II) and U (VI) are separated with each other in dilute nitric acid solution (pH 2.3). 4. U (VI) chelate complexes are conformed by tridendate ligands, which are coordinated with one nitrogen and two oxygens onto amidoxime group-containing fiber.

• Archives of Pharmacal Research
• /
• 제3권1호
• /
• pp.17-21
• /
• 1980

A sensitive spectrophotofluorometric method was developed for the analysis of 2[[3-(trifluoromethyl)phenyl]amino]-3-phridine carboxylic acid (I) in urine. The method is based on the fluoroscence behavior of the I-aluminum complex in absolute ethanol. This fluorophore has activation and emission wavelengths of 355 and 450 nm, respectively. Optimum conditions for the reaction were investigated. The fluorescence was linear in the range of 0.25 3.0 ug of I/ml. Replicate studies of spiked urine samples, each containing 2.5 ug of I/ml showed good precision with a relative standard deviation of 0.019. Overall recovery percent from five spiked urine samples was 99.4 $\pm$1.32%.

• 소성∙가공
• /
• 제21권6호
• /
• pp.384-388
• /
• 2012

Sheet metal forming processes induce residual stress in the final product due to plastic deformation. The residual stress leads to elastic recovery of the formed part called springback, which causes shape errors in the final product. This error is a serious issue, especially for high strength steels, which are widely used in auto-body structures. Therefore, the evaluation of the amount of springback becomes critical for high strength steels. This paper investigates the springback behavior of DP780 steel sheets after the U-bending process using the geometry of the standard U-shape tool from the NUMISHEET'93 benchmark problem. The amounts of springback were measured as a function of the intrusion direction, forming speed and blank holding force.

• 한국진공학회지
• /
• 제12권S1호
• /
• pp.104-106
• /
• 2003

In this study, the electronic structures and physical properties of Ni$_2$MnGa alloy films and their dependence on the order-disorder structural transitions were investigated. The results show that the ordered films behave nearly the same as the bulk $Ni_2$MnGa alloy, including the martensitic transformation at 200 K. Unexpectedly, the disordering in $Ni_2$MnGa alloy films does not lead to any appreciable magnetic ordering down to 4 K. An annealing of the disordered films restores the ordered structure with an almost full recovery of the magnetic and the transport properties of the ordered $Ni_2$MnGa alloy films. A possible explanation of the disappearance of magnetic moment in the disordered film is given by using the ab initio first-principles electronic-structure calculations.

• 방사선산업학회지
• /
• 제18권2호
• /
• pp.127-132
• /
• 2024

Large amounts of liquid radioactive waste or radioactive contaminated water could be produced during the treatment of radiation accidents or during the dismantling and decontamination process of nuclear power plants. Since most of the decontamination agents to date are difficult to recover after adsorption of radioactive isotopes, their use in open environments such as rivers, reservoirs, or oceans is limited. In this study, as a radioactive decontamination agent that can overcome the current limitations when used in an open environment, a paramagnetic core inorganic composite (PMCIC) decomposite agent with high selectivity to cesium ions was developed. PMCore was prepared by synthesizing paramagnetic iron oxide nanoparticles, and inorganic crystals such as metal-ferrocyanide were conjugated to the surface so that PMCore could be selective to cesium ions. The developed PMCIC could be easily recovered from the water by magnetism and could adsorb up to 94 μM of Cs atoms per 1 g of PMCIC.