• 한국국방경영분석학회지
• /
• 제13권1호
• /
• pp.19-27
• /
• 1987

This paper deals with the development of an expert system modeling by constructing a knowledge-based system of the dive recovery for anticrash on the ground or sea during the task of fighter aircraft. In an IBM PC / XT computer, a prototype dive recovery expert system is constructed using mu LISP-86 programming language, and is interconnected to the SAM SUNG RM-501 robot arm to test and simulate this model. The knowledge base of this model is composed of the dive recovery charts and the V-N envelope charts of F-4 D Phantom fighter aircraft. It is shown that the prototype expert system woks well and the feasibility of practical realization is valid.

• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.395-402
• /
• 2007

This study was carried out as basic researches to develop the leaf vegetable harvester. This study was conducted to investigate physical and rheological properties of bundled leaf vegetables with stem (Chinese leek, Crown daisy and Chamnamul) as test materials held and picked-up by a machine. Stress-strain behavior, stress relaxation, and strain recovery for the bundled materials were analyzed using simple Maxwell model. Physical and rheological properties of the materials were investigated by measuring rupture load, deformation and stress experimentally. Also, strain recovery time when unloading was measured using super high speed camera. Recorded recovery time for stress-strain behavior was0.026 s for Chinese leek with liner strain recovery, 0.046 s for Crown daisy and 0.05 s for Chamnamul with non-linear strain recovery. Furthermore, the strain recovery time for permanent deformation was 0.026 s, 0.046 s, and 0.05 s for Chinese Leek, Crown daisy and Chamnamul, respectively. Finally, strain recovery time and strain recovery ratio for the test materials were 0.17 s, 60.4% in Chinese leek, 0.12 s, 55.3% in Crown daisy, 0.15 s, 58.7% in Chamnamul. Here strain recovery time means that how fast the test materials are recovered from initial deformation and strain recovery ratio means how much the test materials are recovered from initial deformation. The above results show that the test materials can be held enough and moved by the belts.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.323-323
• /
• 2000

In the tandem cold wiling mill, the quality is very in portant, and requirements for thickness accuracy become more strict. However, the mathematical model for prediction of rolling force was not considered an elastic deformation at the entry and delivery side of the contacted area between the worked roll and rolling strip so that there was so difficult to control of the thickness. To overcome this problem, the mathematical model included an elastic deformation of strip has been developed and applied to the field in order to predict the rolling force. The simulated results showed that the end of elastic recovery should be included the model, even if the effect of elastic compression was not important.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.369-378
• /
• 2010

The creation of the hydraulic turbine flow factor map will undoubtedly benefit its design by decreasing both the design cycle time and product cost. In this paper, the geometry and flow variables, which effectively affect the flow factor, are proposed, analyzed and determined. These flow variables are further used to create the operating condition maps by using different model approaches categorized into Response Surface Method (RSM) and Artificial Neural Network (ANN). The accuracies of models created by different approaches are compared and the performances of model approaches are analyzed. The influences of chosen variables and the combination of Principle Component Analysis (PCA) and model approaches are also studied. The comparison results between predicted and actual flow factors suggest that two-hidden-layer Feed-forward Neural Network (FFNN), and one.hidden-layer FFNN with PCA has the best performance on forming this mapping, and are accurate sufficiently for hydraulic turbine design.

• 대한산업공학회지
• /
• 제14권2호
• /
• pp.63-70
• /
• 1988

Recently a new regime, called "back school" is advocated for the purpose of rapidly and economically returning a patient to full functional fitness and normal occupational activities. Assuming that this functional and vocational restoration is a goal of a regabilitation program, it is apparent that early recovery and higher success rate are major concern. In this study, a mixture model is developed and used to evaluate the recovery process of low back pain (LBP) patients in a rehabilitation program. The model provides (1) the probability of being recovered, and (2) the rate of recovery. Patients with gradual onset, with higher education, or of young age tend to show better prognosis.

• 한국융합학회논문지
• /
• 제8권5호
• /
• pp.255-263
• /
• 2017

이 연구는 한국 신노년층의 회복탄력성과 생산적 노화의 관계에서 자아존중감의 매개효과를 실증적으로 구명하는데 목적이 있다. 이에 따른 연구대상은 대도시와 중/소도시 그리고 농촌지역 신노년층을 모집단으로 설정하고, 집락무선표집방법을 통해 484명을 대상으로 자료를 수집하였다. 자료분석은 통계프로그램인 IBM SPSS 20.0과 AMOS 5.0 프로그램을 활용하여, 빈도분석, 탐색적 요인분석, 확인적 요인분석, 신뢰도 분석 그리고, 공변량구조 분석을 실시하였다. 이러한 과정을 통해 다음과 같은 결과을 얻었다. 첫째, 한국 신노년들의 회복탄력성은 자아존중감에 영향을 미친다. 둘째, 한국 신노년들의 회복탄력성은 생산적 노화에 영향을 미친다. 셋째, 한국 신노년들의 자아존중감은 생산적 노화에 영향을 미친다. 그리고 마지막으로 넷째, 한국 신노년들의 회복탄력성과 생산적 노화의 관계에서 자아존중감은 부분매개로서 매개효과가 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권3호
• /
• pp.976-995
• /
• 2016

Workflow scheduling is one of the challenging problems in cloud computing, especially when service reliability is considered. To improve cloud service reliability, fault tolerance techniques such as fault recovery can be employed. Practically, fault recovery has impact on the performance of workflow scheduling. Such impact deserves detailed research. Only few research works on workflow scheduling consider fault recovery and its impact. In this paper, we investigate the problem of workflow scheduling in clouds, considering the probability that cloud resources may fail during execution. We formulate this problem as a multi-objective optimization model. The first optimization objective is to minimize the overall completion time and the second one is to minimize the overall execution cost. Based on the proposed optimization model, we develop a heuristic-based algorithm called Min-min based time and cost tradeoff (MTCT). We perform extensive simulations with four different real world scientific workflows to verify the validity of the proposed model and evaluate the performance of our algorithm. The results show that, as expected, fault recovery has significant impact on the two performance criteria, and the proposed MTCT algorithm is useful for real life workflow scheduling when both of the two optimization objectives are considered.

• 유통과학연구
• /
• 제16권12호
• /
• pp.105-113
• /
• 2018

Purpose - This research is intended to suggest ways to enhance customers' satisfaction with service recovery. For this purpose, this study investigated the relationships among perceived justice (distributive, procedural, interactional justice) of service recovery efforts, perceived authenticity of service recovery efforts, the intention to follow advice, and the satisfaction with service recovery. Research design, data, and methodology - This research developed a structural equation model in which the perceived justice (distributive, procedural, interactional justice) and the perceived authenticity are predictors, the satisfaction with service recovery is a dependent variable, and the intention to follow advice is a moderator between the perceived justice (distributive, procedural, interactional justice) and the satisfaction with service recovery. Data were collected from visitors of fast food restaurants in Seoul, Gyeonggi province, and Kangwon province. A total of 330 questionnaires were distributed and 295 responses were collected indicating a response rate of 89.3%. After deleting data having missing value, 288 samples were used for analysis. SPSS 21.0 and AMOS 21.0 were used to test the reliability, validity, model fit, and hypotheses. Results - Empirical results showed that perceived justice, perceived distributive justice, and perceived authenticity had a positive influence on the satisfaction with service recovery. These results indicated that the more highly customers perceived the justice, distributive justice and the authenticity of service recovery efforts, the more they were satisfied with service recovery. And these influences were moderated by the intention to follow advice. Specifically, influences of the perceived justice, the perceived distributive justice, and the perceived authenticity on the satisfaction with service recovery were bigger for people with high intention to follow advice than people with low intention to follow advice. Conclusions - This research contributed to the service recovery literature by showing how perceived justice (distributive, procedural, interactional justice) and perceived authenticity influence satisfaction with service recovery. Moreover, current study introduced the intention to follow advice as moderator of this influence and revealed the moderation role of the intention to follow advice between the perceived justice (distributive, procedural, interactional justice) and the satisfaction with service recovery. Managerially, these results suggested retailing companies some ways to recover from service failure.

• 한국미생물·생명공학회지
• /
• 제27권4호
• /
• pp.320-326
• /
• 1999

The effects of operating pressure, lactate concentration, impurities, and pH on solution flux and lactate rejection in nanofiltration were investigated with model sodium lactate solutions (lactate 10~200g/L) as a model system. In the tested range of pressure(80~140 psig), the solution flux was observed to be proportional to the operating pressure and the rejection of lactate increased only slightly with the pressure. Both of the flux and the rejection decreased with lactate concentration, while the recovery rate of lactate increased. The effects of glucose and yeast extract as impurities on lactate rejection were negligible, but the flux decreased significantly with the addition of yeast extract. At low lactate concentrations, the rejection of lactate increased with pH due to the increased repulsion (Donnan exclusion effect) between lactate ions and membrane surface. But, at high lactate concentrations, the donnan effect was observed to be overwhelmed by the effect of sodium ions added to adjust the pH, and the rejection of lactate decreased with pH. When fermentation broth containing about 89g/L of lactate was nanofiltered, the flux and the rejection of lactate were 2.8L/$m^2$h and 5%, respectively at 120psig. Both of them were slightly lower than those with model solutions. The recovery rate was 2.6mol/$m^2$h.

• 소성∙가공
• /
• 제22권8호
• /
• pp.470-476
• /
• 2013

The aim of the current study was to predict shape recovery behavior of Ni-Ti shape memory alloy (SMA) wire after loading-unloading and after wire drawing. The superelasticity of SMA was analyzed by a hyper-elastic model for the Mullins effect using ABAQUS. Firstly, tensile tests and loading-unloading tests of the Ni-Ti SMA wire with a diameter 1.0 mm were performed using an MTS servo-hydraulic tester. The parameters for the Mullins effect were computed by ABAQUS based on curve-fitting of the loading-unloading test data. The proposed FE-model predicted the shape recovery of Ni-Ti SMA after wire drawing. Finally, the effectiveness of the model was verified by drawing experiments. The wire drawing experiments using the Ni-Ti SMA were conducted on a drawing machine(1ton, 50mm/s). In order to evaluate the shape recovery of Ni-Ti SMA, the drawn wires are annealed for 30min at $450^{\circ}C$.