• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.829-834
• /
• 2002

Carbonation of concrete used impregnation alkalization agent construction reinforcement, recovery of pH, elevation improve, in which efficiency decline mternal force of number and durability because of impregnation alkalization agent applyment general standard, used concrete. Material quality not understanding lack of study and stadard. This study investigate change of PH. recovery depth of impregnation alkalization agent, recovery depth belong a mount of aggregate that comparision, analysis parity.

• Korean Journal of Acupuncture
• /
• 제32권1호
• /
• pp.20-29
• /
• 2015

Objectives : The objectives of this study is to compare the effects of electroacupuncture(EA), warm needling(WN) and Radio Frequency warm needling(RFWN) stimulations on the acupoints at the artificially damaged ankles of Sprague-Dawley rats, which could be classified as the Grade 3. Methods : The foot weight bearing force ratio(FWBFR) of ankle sprain was measured first at 24 hours after without any other stimulations. Pain Recovery Index(PRI) represents the analgesic level, and modified Pain Recovery Index(mPRI) shows the accumulated recovery level. PRI was measured at 2 hours after each stimulus on GB34, GB39 and GB42, and mPRI was during 7 days. Results : EA stimulation of GB34 and GB39 acupoint in grade 3 ankle sprain showed a marked analgesic and recovery effect. RFWN of GB42 exhibited significant analgesic and pain recovery effect. RFWN of GB34 resulted in pain recovery effect but not analgesic effects, and RFWN of GB39 resulted in analgesic effect 2 hours after but not pain recovery. However, WN did not affect the pain recovery among three acupoints at all. Conclusions : In the Grade 3 ankle sprain model, the difference of analgesic effects were explained by the acupoints and the stimulation methods according to the accumulated recovery effects during 7 days. It is insufficient to determine that a certain acupoint has a specific analgesic effect depending on the stimulation method by the results of this study. Therefore, the effects of each stimulation on the acupoints in any other meridians at the sprained ankle should be compared and analyzed.

• 대한금속재료학회지
• /
• 제49권11호
• /
• pp.874-881
• /
• 2011

The present study describes a new technique to extract the primary silicon from an Al-Si alloy melt using centrifugal force during its solidification. The primary silicon was separated from an Al-50 wt.%Si alloy by centrifugal force in the form of a foam, which facilitated subsequent acid leaching to extract the pure silicon due to its wide surface area. The foam recovery after centrifugal separation was decreased as centrifugal acceleration was increased. The final recovery after acid leaching became closer to the solid fraction of the alloy, which was calculated from the Al-Si binary phase diagram, with increasing centrifugal acceleration due to the effective removal of the attached Al on the foam. The purity of the primary silicon obtained by the centrifugal separation method was over 99.99%, with only aluminum being also present.

• Structural Monitoring and Maintenance
• /
• 제3권3호
• /
• pp.195-214
• /
• 2016

Monitoring of impact loads is a very important technique in the field of structural health monitoring (SHM). However, in most cases it is not possible to measure impact events directly, so they need to be reconstructed. Impact load reconstruction refers to the problem of estimating an input to a dynamic system when the system output and the impulse response function are usually known. Generally this leads to a so called ill-posed inverse problem. It is reasonable to use prior knowledge of the force in order to develop more suitable reconstruction strategies and to increase accuracy. An impact event is characterized by a short time duration and a spatial concentration. Moreover the force time history of an impact has a specific shape, which also can be taken into account. In this contribution these properties of the external force are employed to create a sample-force-dictionary and thus to transform the ill-posed problem into a sparse recovery task. The sparse solution is acquired by solving a minimization problem known as basis pursuit denoising (BPDN). The reconstruction approach shown here is capable to estimate simultaneously the magnitude of the impact and the impact location, with a minimum number of accelerometers. The possibility of reconstructing the impact based on a noisy output signal is first demonstrated with simulated measurements of a simple beam structure. Then an experimental investigation of a real beam is performed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제14권4호
• /
• pp.327-339
• /
• 1992

This study was undertaken to investigate the effect of orthognathic surgery on occlusal force. The maximum bite force was measured in 26 dentofacial deformity patients, aged 14-26(mean age 20.3) years, before surgery and at IMF removal, 3, 6, and 12months postsurgery. To grope the correlation of bite force and skeletal change after orthognathic surgery, the cephalometric headplates were measured, tabulated and statistically analyzed. The results were as follows. 1. The presurgical maximum bite force was 13.7kg in upper first molar(rt. Side 12.7kg, it. Side 14.6kg). There was remarkable difference with that of normal occlusion. 2. The recovery of bite force was very significant in according to the operation method and the duration of IMF that was 7.6kg at IMF removal, 14.2kg at 3 months, 19.7kg at 6 months. 26.1kg at 12 months postsurgery. 3. To fasten the recovery and to increase the bite force after orthognathic surgery, the long IMF time and the injury to the masticatory muscle should be avoided by the internal rigid fixation and early physical exercise. 4. The bite force was positively correlated to the changes of mandibular plane angle, the angle between platatal plane and mandibular plan, the angle between occlusal plane and mandibular plane, and negatively correlated to the changes of mandibular body length in craniofacial structure. 5. There was no correlationship between bit force and mesial inclination of tooth long axis of first molar in this subject. 6. There was no correlation between the changes of bite force and the changes of mechanical advantage of the temporal and masseter muscle.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.28-33
• /
• 1998

In monitoring and diagnosing machinery with gear trains, gear meshing force are the important signature indicating the operating condition. The gear meshing forces, however, are extremely difficult to be measured while gears are rotating. One easy possible way is to measure vibrations which are produced and transferred by the gear meshing forces. While the gear meshing forces are traveling, the force waveforms are shaped by the path transfer function. In the paper, the way to recover the source waveform by eliminating the path effects is discussed using inverse filter.

• 한국전자통신학회논문지
• /
• 제7권4호
• /
• pp.741-746
• /
• 2012

인터넷에서 널리 사용되고 있는 수송 계층 프로토콜인 TCP(transmission control protocol)의 혼잡제어(congestion control) 기능은 손실된 패킷을 감지하고 복구하기 위한 손실 복구(loss recovery) 과정을 포함한다. 손실 복구 과정은 fast retransmit와 fast recovery 두 개의 알고리듬으로 이루어지는데 불필요한 재전송 타임아웃을 방지하기 위한 많은 연구가 이루어져 왔다. 그 결과로 최근에는 선택 승인(selective acknowledgement) 옵션과 제한 전송(limited transmit) 기법이 제안되어 IETF (Internet Engineering Task Force)의 표준 문서로 채택되었다. 최근에는 재전송된 패킷이 다시 손실되는 경우 발생하는 타임아웃을 방지하기 위한 재전송 손실 복구(lost retransmission detection)를 위한 방법이 제시되었다. 그러나 아직 재전송 손실 복구 기능의 TCP 혼잡 윈도우의 가장 기본적인 동작 원칙인 AIMD (additive increase multiplicative decrease) 측면에서의 분석이 되어 있지 않은 상태이다. 따라서 본 논문에서는 이를 고려한 재전송 손실 복구 알고리듬의 동작을 시뮬레이션을 통해 평가한다.

• 한국자동차공학회논문집
• /
• 제17권4호
• /
• pp.101-107
• /
• 2009

Actuators using shape memory alloys use the one-way shape recovery stress. But when external load is applied the accumulated plastic strain induced by repeated deformation is the factor of generation of uncorrect recovery stress and unreliability. To solve this problem, two-way shape memory effect (TWSME) is considered. TWSME induced by plastic deformation have advantages including simple heating cycle without external force and enough recovery force for using actuators. but there is no research on cylinder-type or tube-type shape memory alloy actuators using two-way shape memory effect until now. Therefore in this study, characteristics of two-way shape memory effect is verified through the compression experiments using cylinder-type and tube-type specimens.

• 복식
• /
• 제58권1호
• /
• pp.1-8
• /
• 2008

The purpose of this study was to investigate the mechanical properties and hand values of polypropylene knit and to analyze its color-fastness for light, laundering and abrasion, comparing to nylon and polyester knits. The results of this study were as follows: 1. Polypropylene stretched more with less force than nylon and polyester and its elastic recovery and shape stability were better than nylon and polyester. 2. Polypropylene was more flexible than nylon and polyester. 3. Polypropylene stretched more easily for shearing but its recovery from shearing was less than nylon and polyester. 4. Polyester had smoother surface than nylon and polyester. 5. Polypropylene was compressed more easily than polyester with less force but less than nylon. Its recovery from compression was more than nylon and polyester. 6. Polypropylene had lower KOSHI and SHARI values and higher FUKURAMI value than nylon and polyester. It had better T.H.V. value than nylon but less than! polyester. 7. Color fastness of polypropylene for lanudering, light, and abrasion in wet and dry conditions was good except polypropylene dyed with red color.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.280-286
• /
• 2017

The mechanical and dynamic properties according to the content of filler, plasticizer, and crosslinking agent of rubber composites for Lipseal were measured in this study. The mechanical properties of the composite including the silane coupling agent and silica were found to be superior to those of the composite containing carbon black. It was found that the rebound resilience characteristics were influenced by the crosslink density of sulfur rather than the filler or plasticizer. In the case of recovery, it was confirmed that the elastic restoring force improved in the compression deformation condition and recovery increased as the crosslinking density increased. The rubber composite for Lipseal of this study is expected to improve the manufacturing technology of the rubber composite which can implement the optimum function for recognizing the performance such as oil resistance, durability and compression set.