• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.201-206
• /
• 2022

Energy harvesting is a concept introduced in 1954 by Bell Labs in the US while conducting research on solar cells that convert sunlight into energy. Such energy harvesting technology is a technology that collects wasted or unused energy in daily life and recycles it as electric power. In particular In the case of a photovoltaic power generation system, energy harvesting can be applied by storing electricity generated by using a battery to reduce power consumption generated by the inverter in the form of loss of power generation in cloudy weather compared to sunny days. Therefore, in this paper, energy harvesting technology is applied in the low sunlight section such as sunrise, sunset, and cloudy weather to improve the amount of power generation by recovering the power that is below the minimum operating voltage of the inverter and dissipated. Accordingly, the research contents were verified through the development of systems and algorithms according to the amount of solar power generation and the development of systems and algorithms using low power generated in sunset, sunrise, and other environments.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.10
• /
• pp.373-382
• /
• 2016

Under the Agricultural technology is influenced from climate that is requisite of seasonal. So this system will cover the problems and develop the agricultural industry as well. So far, the agricultural industry is developing however, it has the points of the weakness because of natural disasters such as wind risk and heavy snow. This paper designs system to change vinyl on the greenhouse. This is a preliminary study for the real-time feedback control of greenhouse. The study developed a wireless IoT sensor system based on authentic technology capacities, to integrate with the protected horticulture Management System. These system was used to evaluate the levels of the snow cover and wind through IoT devices. The existing greenhouse uses the warm water to clear snow or to change methods. This system will recover by changing the vinyl which is covered outside of the greenhouse. The points of the system is changing vinyl to spin pipe. It is contained extra vinyl. The effects of this system are minimized labor protected crops from natural disasters. For this purpose, the study first developed a wireless IoT sensor unit that integrates an MEMS device and wireless communication module. Also, the study developed an operating program that enables real-time response measurement. It will help operational and maintenance greenhouse as a result.

• Journal of Broadcast Engineering
• /
• v.12 no.2
• /
• pp.80-92
• /
• 2007

IPTV Services that is representative union service of broadcasting and telecommunication need guarantee of QoS, efficiency of multicasting, and hish bandwidth on the network. Because typical TDM based metro transport network was designed by transporting fixed voice traffic with stable and recovering method, it has a defect of bottleneck and a waste of bandwidth for acceptance of data traffic with burst feature and then all of data are treated equally at the transport network because it cannot classify between advanced high end service and best effort low end service. for completely resolving this kind of problem about increasing burst traffic and QoS issues, firstly we need to new design for transport network. This paper presents transformation method from TDM based metro transport network to packet based transport network and advantage and effectiveness of packet based transport network and also indicates technical factor and characters about method of packet transport system. As a result of research, the Packet Transport System, which is a transmission network for packet delivery, take in not only a specific character of legacy TDM but QoS, Multicast and high bandwidth, then, it is able to keep an effective bandwidth and a stabilized performance of packet transmissions. Additionally, if a fault be occurred on an optical link, the system is able to guarantee a differential QoS by an each service class using an algorithm to make certain of a traffic existence and contain a protective mechanism.

• Journal of forensic and investigative science
• /
• v.3 no.1
• /
• pp.60-73
• /
• 2008

The purpose of Emergency Medical System(EMS) is what a patient returns to society with recovering mental tone in the shortest time as giving prompt and proper medical treatment to patient in emergency situation, and the Correctional Administration(CA) is purposed for the convict to return and settle down to society after release from prison in success as executing schooling, enlightenment activity, vocational training to convict who was quarantined from the society for the term of imprisonment. The EMS and CA will coincide each other which is reverting people to society in safety. This study aims to suggest the developmental program of EMS in correctional facilities through the cause of emergency situation, system, human resources, establishment, medical equipments, state of budget and the point issue for safety of victim who has many chances that is exposed to physical damage and disease because of particularity of lower culture in correctional facilities and the staff who works there. First, in the view of the correctional facility security system, a proper number of the emergency rescuers should be employed. Second, the effective transportation system along with some emergency medical equipment needs to be established. Third, the correctional officers and the prisoners should be learned the first-aid training which is realistic, practical and systematic. Fourth, the cooperative system should be established such as 1339 emergency medical information center in society. Fifth, the Ministry of Health and Welfare must increase EMS budget for correctional facilities.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10A
• /
• pp.1113-1122
• /
• 2004

This paper is basically to achieve the high-availability and high-reliability of the control system from the implementation of the fault-tolerant system using the hot-standby sparing technique. To meet the objective, we design and implement a board with fault tolerance I/O bus to detect the fault. Warm-standby sparing technique is the fault tolerance technique usually used for switching control system in present. This technique can be easily implemented, but can not detect the fault quickly and can malfunction because of the hardware fault. The hot-standby sparing fault tolerant technique implemented in this paper is consists of dual processor modules and a I/O processor using fault tolerant I/O bus. The proposed method can find the faults as soon as possible, so it can prevent from wrong operation. Also it is possible to normal re-service due to the short recovering time. To implement the fault-tolerant dual system with fault detection be, two daughter, called FTMA and FTIA, boards designed and implemented are applied to the system. And we also simulated the proposed method to verify the high-availability and high-reliability of the control system using Markov process.

• Journal of Bio-Environment Control
• /
• v.11 no.3
• /
• pp.101-107
• /
• 2002

This study was carried out to improve the performance of heat recovery device attached to exhaust gas flue connected to combustion chamber of greenhouse heating system. Three different units were prepared far the comparison of heat recovery performance; A-type is exactly the same with the typical one fabricated for previous study of analyzing heat recovery performance in greenhouse heating system, other two types (B-type and C-type) modified from the control unit are different in the aspects of airflow direction (U-turn airflow) and pipe arrangement. The results are summarized as follows ; 1. In the case of Type-A, when considering the initial cost and current electricity fee required for system operation, it was expected that one or two years at most would be enough to return the whole cost invested. 2. Type-B and Type-C, basically different with Type-A in the aspect of airflow pattern, are not sensitive to the change of blower capacity with higher than 25m$^3$.min$^{-1}$ . Therefore, heat recovery performance was not improved so significantly with the increment of blower capacity. This was assumed to be that air flow resistance in high air capacity reduced the heat exchange rate as well. Never the less, compared with control unit, resultant heat recovery rate of Type-B and Type-C was improved by about 5％ and 13％, respectively 3. Desirable blower capacity of these heat recovery units experimented were expected to be about 25m$^3$.min$^{-1}$ , and at the proper blower capacity, U-turn airflow units showed better heat recovery performance than control unit. But, without regard to the type of heat recovery unit, it was recommended that comprehensive consideration of system's physical factors such as pipe arrangement density, unit pipe length and pipe thickness, etc., was required for the optimization of heat recovery system in the aspects of not only energy conservation but economic system design.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.2
• /
• pp.247-258
• /
• 2003

In this paper, we present a pen-shaped input device equipped with accelerometers and gyroscopes that measure inertial movements when a user writes on 2 or 3 dimensional space with the pen. The measurements from gyroscope are integrated once to find the attitude of the system and are used to compensate gravitational effect in the accelerations. Further, the compensated accelerations are integrated twice to yield the position of the system, whose basic concept stems from the field of inertial navigation. However, the accuracy of the position measurement significantly deteriorates with time due to the integrations involved in recovering the handwriting trajectory This problem is common in the inertial navigation system and is usually solved by the periodic or aperiodic calibration of the system with external reference sources or other information in the filed of inertial navigation. In the presented paper, the calibration of the position or velocity is performed on-line and off-line. In the on-line calibration stage, the complementary filter technique is used, where a Kalman filter plays an important role. In the off-line calibration stage, the constant component of the resultant navigational error of the system is removed using the velocity information and motion detection algorithm. The effectiveness and feasibility of the presented system is shown through the experimental results.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.669-675
• /
• 2006

Toluene of aromatic compounds, MEK of ketones and IPA of alcohols were extremely used as VOCs (Volatile Organic Compounds) on the getting into step with industrial process. The adsorption characteristics of three component solvent vapors (Toluene-MEK-IPA) on the activated carbonaceous adsorbents such as AC, ACF and AC+ACF were investigated in a stainless steel fixed bed adsorption experimental apparatus in order to identify those carbons for eliminating and recovering solvent vapors from industrial emission sources. The used activated carbonaceous adsorbents were pelletized commercial activated carbon and activated carbon fiber. The breakthrough curves and adsorption capacity have been obtained at atmospheric pressure in a adsorption fixed bed. It has been found that non-polar and larger molecules have been adsorbed better than polar and smaller molecules. Especially, alcohols and ketones were poorly adsorbed due to competitive adsorbability in ternary mixture system. However, it could be overcome by employment of activated carbonaceous adsorbent which have different porosity distribution appropriately.

• Journal of IKEEE
• /
• v.9 no.2 s.17
• /
• pp.170-178
• /
• 2005

The video data corrupted by the transmission error due to packet loss induce error propagation in decoded video data, and cause poor video quality. To remedy these corrupted video data, there have been introduced two types of error concealment techniques: spatial or temporal error concealment algorithm. Computational overhead by using spatial error concealment algorithm is a serious disadvantage in mobile video data streaming environment. In this paper, we propose hybrid type error concealment technique recovering video quality of mobile device using MPEG-4 video streaming on error-prone wireless network. Our algorithm is implemented in MPEG-4 decoder. The algorithm adopts Intel Wireless MMX technology to provide high performance of portable embedded multimedia mobile device. It is proven that the proposed algorithm shows expected performance for a mobile streaming system(PDA) on IP channels. Our approach showed better processing speed and better video quality comparing with traditional error concealment algorithm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.1
• /
• pp.70-76
• /
• 2018

Excessive tooth wear can lead to decrease in occlusal vertical dimension and can cause pathological changes in the oral environment and masticatory system. When recovering occlusal vertical dimension and occlusion, accurate diagnosis and analysis are essential. This clinical case describes a 75-year-old woman with severely worn dentition due to loss of the posterior support. Full mouth rehabilitation with occlusal vertical dimension increment was planned. Clinical and radiographic examinations, occlusal vertical dimension evaluation, and diagnostic wax-up were performed and patient adaptability was evaluated using provisional restorations. As for definitive restoration, considering economic condition of the patient, removable partial denture was fabricated and solitary implants were placed in the mandibular left and right posterior region to increase support and retention of the removable partial denture. During one year of follow-up, functional and esthetic outcomes were observed satisfactory.