• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1404-1411
• /
• 1993

Unlike voice communication, data transmission, can be seriously affected by transient channel impairments. In some cases, timing synchronization between the transmitter and the receiver may not be recovered in the presence of these kinds of impairments without a forced reinitialization process. Therefore, it is highly desirable for data communication equipment to have an efficient timing loss detector for robust recovery. In this paper, one such detector is proposed for data transceivers haying a secondary channel embedded in the main channel. A known sequence multiplexed with the secondary channel data is repeatedly sent through the embedded secondary channel. For continuous watch-dog like operation, the detection is sequentially performed based on a modified up/down counter scheme. The performance of the proposed detector is analytically evaluated In closed form.

• Journal of Communications and Networks
• /
• v.6 no.3
• /
• pp.235-244
• /
• 2004

There have been a lot of approaches to evaluate and predict transmission control protocol (TCP) performance in a numerical way. Especially, under the recent advance in wireless transmission technology, the issue of TCP performance over wireless links has come to surface. It is because TCP responds to all packet losses by invoking congestion control and avoidance algorithms, resulting in degraded end-to-end performance in wireless and lossy systems. By several previous works, although it has been already proved that overall TCP performance is largely dependent on its loss recovery performance, there have been few works to try to analyze TCP loss recovery performance with thoroughness. In this paper, therefore, we focus on analyzing TCP's loss recovery performance and have developed a simple model that facilitates to capture the TCP sender's behaviors during loss recovery period. Based on the developed model, we can derive the conditions that packet losses may be recovered without retransmission timeout (RTO). Especially, we have found that TCP Reno can retransmit three packet losses by fast retransmits in a specific situation. In addition, we have proved that successive three packet losses and more than four packet losses in a window always invoke RTO easily, which is not considered or approximated in the previous works. Through probabilistic works with the conditions derived, the loss recovery performance of TCP Reno can be quantified in terms of the number of packet losses in a window.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.10
• /
• pp.1068-1078
• /
• 2004

In this paper we investigated the characteristics of surface degradation in silicone rubber due to corona exposure and recovery mechanism. It was shown that surface free energy was 22.42 mJ/$m^2$ on initial sample but surface free energy was approximately increased to 71.14 mJ/$m^2$ after 45 minutes. However, surface free energy on silicone rubber after corona discharge treatment was completely recovered within a short time due to diffusion of low molecular weight(LMW) silicone fluid. It was shown that corona discharge insured the increase of diffusible LMW chains, which could lead to recover the surface hydrophobicity. 200～370 g/mol distribution of LMW silicone fluid which was extracted by solvent-extraction with gel permeation chromatography (GPC) was contributed to recovery. The surface degradation characteristics on silicone rubbers and the recovery mechanism based on our results were discussed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.2
• /
• pp.110-118
• /
• 2014

This paper addresses the fugitive emission factors of Reefer Container at use-phase and disposal-phase. The residual quantities and operation time of thirty nine Container were weighed, using a commercial recover of refrigerants to determine the emission factors at the use-phase. The emission factor at the disposal-phase, refrigerant is accomplished has not recycled, the residual rate was assumed that the emission factor. The average residual rate of thirty nine Container is determined to be $70.8{\pm}4.0%$. The emission factor at the use-phase is estimated to be $4.9{\pm}0.9%/yr$ in the case of using average age of 8.1 years and the average residual rate determined here. We estimate 162.7 g/yr for the average emission quantity of refrigerant per operating Container, while 2038.1 g for that per waste Container. Since the chemical compositions of refrigerant of waste Container were the same as those of new refrigerant, it is expected that the refrigerant recovered from waste Container can be reused for refrigerant.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3136-3150
• /
• 2015

A vision-based 3D tracking of articulated human hand is one of the major issues in the applications of human computer interactions and understanding the control of robot hand. This paper presents an improved approach for tracking and recovering the 3D position and orientation of a human hand using the Kinect sensor. The basic idea of the proposed method is to solve an optimization problem that minimizes the discrepancy in 3D shape between an actual hand observed by Kinect and a hypothesized 3D hand model. Since each of the 3D hand pose has 23 degrees of freedom, the hand articulation tracking needs computational excessive burden in minimizing the 3D shape discrepancy between an observed hand and a 3D hand model. For this, we first created a 3D hand model which represents the hand with 17 different parts. Secondly, Random Forest classifier was trained on the synthetic depth images generated by animating the developed 3D hand model, which was then used for Haar-like feature-based classification rather than performing per-pixel classification. Classification results were used for estimating the joint positions for the hand skeleton. Through the experiment, we were able to prove that the proposed method showed improvement rates in hand part recognition and a performance of 20-30 fps. The results confirmed its practical use in classifying hand area and successfully tracked and recovered the 3D hand pose in a real time fashion.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4643-4660
• /
• 2014

Integrity authentication of biometric data in Wireless Body Area Network (WBAN) is a critical issue because the sensitive data transmitted over broadcast wireless channels could be attacked easily. However, traditional cryptograph-based integrity authentication schemes are not suitable for WBAN as they consume much computational resource on the sensor nodes with limited memory, computational capability and power. To address this problem, a novel lightweight integrity authentication scheme based on reversible watermark is proposed for WBAN and implemented on a TinyOS-based WBAN test bed in this paper. In the proposed scheme, the data is divided into groups with a fixed size to improve grouping efficiency; the histogram shifting technique is adopted to avoid possible underflow or overflow; local maps are generated to restore the shifted data; and the watermarks are generated and embedded in a chaining way for integrity authentication. Our analytic and experimental results demonstrate that the integrity of biometric data can be reliably authenticated with low cost, and the data can be entirely recovered for healthcare applications by using our proposed scheme.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06b
• /
• pp.147-153
• /
• 1998

This paper provides a method for video augmentation using image interpolation. In computer graphics or augmented reality, 3D information of a model object is necessary to generate 2D views of the model, which are then inserted into or overlayed on environmental views or real video frames. However, we do not require any three dimensional model but images of the model object at some locations to render views according to the motion of video camera which is calculated by an SFM algorithm using point matches under weak-perspective (scaled-orthographic) projection model. Thus, a linear view interpolation algorithm is applied rather than a 3D ray-tracing method to get a view of the model at different viewpoints from model views. In order to get novel views in a way that agrees with the camera motion the camera coordinate system is embedded into model coordinate system at initialization time on the basis of 3D information recovered from video images and model views, respectively. During the sequence, motion parameters from video frames are used to compute interpolation parameters, and rendered model views are overlayed on corresponding video frames. Experimental results for real video frames and model views are given. Finally, discussion on the limitations of the method and subjects for future research are provided.

• Clinics in Shoulder and Elbow
• /
• v.8 no.2
• /
• pp.181-186
• /
• 2005

An anterior dislocation of the elbow without a fracture of the olecranon is an extremely rare injury. This paper reports a 36-year-old male who stumbled and fell on his outstretched hand during a soccer game. The anteroposterior and lateral radiographs indicated a simple anterior dislocation of the elbow, which was reduced using a closed method. The elbow joint was stable in the range of motion, but the sensation of the two ulnar digits was still reduced. MRI was useful for the identification of the pathoanatomy. At the follow-up examination three months after the initial trauma, the hypesthesia has fully recovered and the patient regained the full range of the elbow and forearm motion without pain and instability. After 18 months, the patient had a normal elbow function, and could play various sports. If an anterior elbow dislocation is detected early, a closed reduction with careful pathoanatomical considerations would be successful.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.5
• /
• pp.1744-1765
• /
• 2014

A client stores data in the cloud and uses remote data checking (RDC) schemes to check the integrity of the data. The client can detect the corruption of the data using RDC schemes. Recently, robust RDC schemes have integrated forward error-correcting codes (FECs) to ensure the integrity of data while enabling dynamic update operations. Thus, minor data corruption can be recovered by FECs, whereas major data corruption can be detected by spot-checking techniques. However, this requires high communication overhead for dynamic update, because a small update may require the client to download an entire file. The Variable Length Constraint Group (VLCG) scheme overcomes this disadvantage by downloading the RS-encoded parity data for update instead of the entire file. Despite this, it needs to download all the parity data for any minor update. In this paper, we propose an improved RDC scheme in which the communication overhead can be reduced by downloading only a part of the parity data for update while simultaneously ensuring the integrity of the data. Efficiency and security analysis show that the proposed scheme enhances efficiency without any security degradation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.8
• /
• pp.3873-3887
• /
• 2018

In this paper, we propose a novel method to recover images corrupted by impulse noise. The proposed method uses two stages: noise detection and filtering. In the first stage, we use pixel values, rank-ordered logarithmic difference values, and median values to train a neural-network-based impulse noise detector. After training, we apply the network to detect noisy pixels in images. In the next stage, we use group-based weighted couple sparse representation to filter the noisy pixels. During this second stage, conventional methods generally use only clean pixels to recover corrupted pixels, which can yield unsuccessful dictionary learning if the noise density is high and the number of useful clean pixels is inadequate. Therefore, we use reconstructed pixels to balance the deficiency. Experimental results show that the proposed noise detector has better performance than the conventional noise detectors. Also, with the information of noisy pixel location, the proposed impulse-noise removal method performs better than the conventional methods, through the recovered images resulting in better quality.