• 자원리싸이클링
• /
• 제3권1호
• /
• pp.44-51
• /
• 1994

PETqudds 부위별로 PET, HDPE, PVC, PP와 같은 여러 가지 다른 종류의 플라스틱으로 이루어져 있어 페 PET병의 재활용을 위하여서는 구성 성분별로 분리가 선행되어야 한다. 본 연구에서는 부상침강법에 의한 분리실험을 실시하였다. 수돗물을 사용하여 라벨을 제거한 후 부상침강 분리시키면 94%의 PET 회수율을 얻을 수 있었다. 라벨이 있을 경우에는 PVC와 PET가 침강하고 PP와 HDPE가 부상하므로 완전히 PET를 회수 할 수 없었다. 따라서 라벨을 제거시킨 후 분리를 시키든지 PVC 라벨의 재질을 PP나 PE로 교체하는 방안이 강구되어야 할 것으로 사료된다. 회수한 PET와 HDPE의 각종 물성을 측정하여 원재료와 비교해 본 결과 이들의 재활용이 가능함을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.503-506
• /
• 2004

In this paper we investigated the changes of surface hydrophobic characteristics on silicone rubbers by corona discharge treatment and also investigated the distribution and the behavior of low molecular weight(LMW) silicone fluid which was extracted by solvent-extraction with gel permeation chromatography(GPC). It was shown that contact angle was $110.5^{\circ}$ on initial sample but contact angle was approximately decreased to $10^{\circ}$ after 45 minutes. However the surface hydrophobic characteristic on silicone rubbers which were removed from corona discharge was recovered within 5 hours. It was shown that corona discharge insured the increase of diffusible LMW chains, which could lead to recover the surface hydrophobicity. The surface hydrophobic characteristics on silicone rubbers and the recovery mechanism based on our results were discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.257-258
• /
• 2006

The $I_c$ degradation behaviors of externally-reinforced Bi-2223 superconducting tapes under pressurized liquid nitrogen were investigated. Tapes with different thickness of reinforcement layers were compared and the results showed that when the bending strain was calculated at the outer surface, the tape with the thicker reinforcement showed a better bending strain tolerance of $I_c$, but when the bending strain was calculated at the outermost filament, the $I_c$ degradation behavior became identical for all tapes. $I_{c0}$ decreased with the increase of applied pressure. After depressurization to atmospheric pressure from 1 MPa, the $I_c$ was completely recovered to its initial values. Ballooning occurred after a thermal cycle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.96-99
• /
• 2005

As the demand of internet networks using backbone communication systems recently increased, the researches on the high-speed wideband optical communication systems are required. For high-speed optical communication systems, asymmetric sampled grating distributed feedback laser diodes (DFB-LDs) are developed and the reliability of DFB-LDs is examined. The reliability of DFB-LDs is performed by monitoring I-V and L-I characteristics and two degradation phenomena related to the electrical characteristics of LDs are observed during the life tests. The first degradation phenomenon by increasing the reverse current is considered as a formation of leakage current path enough to prevent lasing operation in lateral blocking layer near active region of lasers. The second degradation phenomenon by decreasing the forward current is considered as activation of non-radiative Auger recombination process by thermal energy and the second degradation phenomenon is recovered after the off-test period at room temperature Eventually, evaluating the reliability of DFB LDs can allow us to improved the manufacturability in high-volume manufacturing.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.921-927
• /
• 1989

본 연구에서는 피로 균열의 진전 특성 및 표면 균열과 같은 3차원 균열의 진전 특성에 나타나는 재질 열화의 영향, 열화와 피로 파괴 형태의 관계, 균열진전 속도의 분산(scattering)과 열화의 관계등에 주목해서 열화재와 회복재의 2종류의 재료를 사용해, 피로 시험에 의한 균열진전의 실험적 특성을 고찰하였다. 또한, 저자들의 종래 관통 균열 진전 특성에 대한 연구 결과를 응용해서 열화와 균열진전의 확률특성을 고려한 표면균열 진전에 대한 시뮬레이션(simulation)을 행해서 피로 수명 예측에 미치는 열화의 영향에 대해 검토해 보았다.

• 공업화학
• /
• 제21권2호
• /
• pp.238-241
• /
• 2010

콜타르 유분(유출온도범위: $240{\sim}265^{\circ}C$)으로부터 추출-증류의 조합에 의해 회수한 54.3 wt% 인돌 유출액(유출온도범위 $250{\sim}255^{\circ}C$)을 원료로 사용하여 용액 결정화 조작을 행해 인돌의 고순도 정제를 검토했다. 원료 유출액은 8성분(quinoline, iso-quinoline, indole, quinaldine, 1-methylnaphthalene, 2-methylnaphthalene, biphenyl, phenyl ether)으로 구성되어 있다. 결정화 조작의 용매로서는 노말헥산을, 냉매로서는 메탄올 수용액(50 : 50 vol%)을 각각 사용하였으며, 결정화 장치로서는 재킷이 부착된 pyrex제 유리 회분 교반기를 사용했다. 결정화 온도와 용매/원료의 초기 체적비의 증가는 인돌의 순도를 향상시켰으나, 역으로 수율을 저하시켰다. 석출된 결정의 세정조작 없이, 노말헥산을 용매로 사용한 용액 결정화 조작에 의해 고순도(99.3 wt%)의 인돌을 고수율(50%)로 회수할 수 있었다.

• 공업화학
• /
• 제26권3호
• /
• pp.377-380
• /
• 2015

본 연구에서는 p-diiodobenzene (PDIB)으로부터 p-phenylenediamine (PPD) 합성 후 생성되는 부산물인 $NH_4I$를 PDIB 합성의 원료로 재활용하기 위하여 $I_2$ 회수 공정의 최적화에 관한 연구를 진행하였다. 양이온교환수지를 사용하여 $NH_4I$ 시약 용액으로부터 $I_2$ 회수에 관한 연구를 진행하였고 양이온교환수지의 파과곡선을 통해 파과점 및 관류교환용량을 조사하였다. 회수되는 요오드의 수율 및 순도 향상을 위해 $NH_4I$의 공급용액 및 산화제($H_2O_2$)의 농도 변화, 상온과 저온 건조공정 그리고 산화시간에 따른 순도와 수율을 측정하여 $NH_4I$ 용액으로부터 요오드를 회수하는 공정의 최적조건을 확립하였다. 또한 산화공정 후 발생하는 여액을 재사용하는 과정을 도입하여 실험한 결과 수율 94.96%, 순도 96.65%의 $I_2$를 회수할 수 있었다.

• Journal of Chest Surgery
• /
• 제33권5호
• /
• pp.377-384
• /
• 2000

Background: Numerous studies of safe, long term preservation for lung transplantation have been performed using ex vivo models or in vivo single lung transplantation models. However, a safe preservation time which is applicable for clinical use is difficult to determine. We prepared LPDG solution for lung preservation study. In this study we examined the efficacy of LPDG(low potassium dextran glucose) solution in 24-hour lung preservation by using a sequential bilateral canine lung allotransplant model. Material and Method: Seven bilateral lung transplant procedures were performed using weight-matched pairs(24 to 25kg) of adult mongrel dogs. The donor lungs were flushed with LPDG solution and maintained hyperinflated with 100% oxygen at 1$0^{\circ}C$ for a planned ischemic time of 24 hours for the lung implanted first. After sequential bilateral lung transplantation, dogs were maintained on ventilators for 3 hours: arterial resistance were determined if the recipients hourly after bilateral reperfusion and compared with pretransplant-recipient values, which were used as controls. After 2hours of reperfusion, the chest X-ray, computed tomogram and lung perfusion scan were performed for assessmint of early graft lung function. Pathological examinations for ultrastructural findings of alveolar structure and endothelial structure of pulmonary artery were performed. Result: Five of seven experiments successfully finished the whole assessments after bilateral reperfusion for three hours. Arterial oxygen tension in the recipients was markedly decrased in immediate reperfusion period but gradually recovered after reperfusion for three hours. The pulmonary artery and pulmonary vascular resistance showed singificant elevation(p<0.05 versus control values) but also recovered after reperfusion for three hours(p<0.05 versus immediate period value). The ultrastructural findings of alveolar structure and endothelial structure of pulmonary artery showed reversible mild injury in 24 hours of lung perservation and reperfusion. Conclusion : This study suggests that LPDG solution provides excellent preservation in a canine model in which the dog is completely dependent on the function of the transplanted lung.

• 자원리싸이클링
• /
• 제23권6호
• /
• pp.63-67
• /
• 2014

갈륨은 주로 산화물 반도체용 타겟이나 LED 칩을 만드는 중요한 소재로 사용하고 있는데 아직까지 폐기물로부터 재자원화에 의한 순환량이 매우 낮다. 이로 인해 갈륨을 함유하고 있는 대부분의 폐자원은 해외로 유출되고 원재료는 수입에 의존하고 있다. 따라서 희유금속인 갈륨을 함유하고 있는 저품위 갈륨으로부터 갈륨을 회수하여 고순도화하는 방법을 연구 하였다. 전처리 과정으로 스크랩을 미분쇄하여 산으로 침출하였다. 침출액내 인듐은 치환으로 석출시켜 분리한 후 알칼리를 사용하여 갈륨과 아연을 수산화물로 침전시켜 여과 분리하였다. 갈륨과 아연수산화물을 알칼리용액으로 침출시켜 전해액을 제조하였고 전해채취로 갈륨과 아연메탈을 회수하였다. 갈륨과 아연은 진공정제를 통하여 아연을 제거하고 고순도의 갈륨을 회수하였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2226-2230
• /
• 2007

As a cathode material of lithium rechargeable batteries, charged Li[Co0.1Ni0.15Li0.2Mn0.55]O2 electrodes, which were aged thermally at 25 oC and 90 oC respectively, were characterized by means of charge/discharger, impedance spectroscopy, and X-ray diffraction. The discharge capacity diminution of the electrodes aged at 25 oC and 90 oC for 1 week was 4% and 23%, respectively. The cell aged at 25 oC was recovered on cycling. However, the capacity loss after ageing at 90 oC was not recovered in a subsequent cycling test, which demonstrates that the reaction occurring during ageing at 90 oC is irreversible. A significant impedance increase of aged electrode at 90 oC is associated with irreversible capacity loss. The structural changes including phase transformation were not detected by XRD analysis, because it could be due to out of detection limit. After ageing, impedance was slightly decreased during subsequent cycling test. It could be explained the cyclic performance of aged sample is stable. The thermal stability was not deteriorated by ageing even at the high temperature of 90 oC.