• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.5
• /
• pp.289-296
• /
• 2016

The availability of NMP, a solvent used in the manufacturing process of cathode material for lithium ion battery, depends on importation, and the price remains high because of the monopoly of BASF and ISP. For these reasons, most Lithium ion battery manufacturers reuse NMP after recovering it from the exhaust air in the drying process. In Korea, absorption method is mainly used for recovering NMP from the absorption tower using the hydrophilicity of NMP. However, this system has a few disadvantages, such as low purity (80％) of the recovered NMP and 100％ emission due to high water content of the treated gas. In this study, we develop a hybrid NMP recovery system by combining cooling condensation method with concentration method, by which it is possible to obtain an NMP recovery rate of 99.6％, and a high purity (96.1％) of the recovered NMP.

• The Journal of Korean Medicine
• /
• v.16 no.2 s.30
• /
• pp.100-114
• /
• 1995

This bibliographic study was designed to research indications of the Moschus which was representatively used for resuscitation in acute stage of stroke throughout successive books of oriental medicine. Especially, in this study, severe cases with disturbance of consciousness and acute stage of stroke were investigated. The results were summarized as the followings: 1. The Moschus was dried material which secreted from aromatic vescicle of Moschus moschiferus L.. which was pungent in flavor, warm in nature, nontoxic and strongly aromatic. The Moschus removed the obstruction in the channels and used to early stage of stroke. 2. The Moschus was aromatic resuscitatable medicine, which recovered disturbance of consciousness due to stroke. 3. The Moschus had excitatory actions of respirtory center and vascular motor center, heart stimulating action, inhibitatory action of the platelet aggregation and anti thrombin action and recovered cerebral ischemic change. According to these actions, the Moschus could be used cerebral infarction. 4. Prescriptions included the Moschus was used to symptoms of unconsciousness, secretion, stuporous mental state, dysarthria, facial palsy and hemiplegia. That was Angungwoohwangh wan(安宮牛黃丸), Woohwangchungshimwon(牛黃淸心元), Sahyangsohaphangwon(麝香蘇合香元), etc. According to the above mentioned results, the Moschus was aromatic resuscitatable medicine which was used for symptoms of conscius disturbance, convulsion, sudden fainting etc., promoted cerebral blood flow and had good effect on acute stage of stroke and severe cases with conscious disturbance. Therefore, it is considered that the Moschus must be studied for effect of cerebral infarction and hemorrhage in clinic with animal's and pharmacological experimental results.

• Journal of Environmental Science International
• /
• v.30 no.2
• /
• pp.135-143
• /
• 2021

This study executed evaluation of drying characteristics based on the polymer injection rate (8%, 10% and 12%) and the drying method[NIF(near-infrared ray). According to this study analyzed VS, VS/TS, and calorific value compared with 'the auxiliary fuel standard of the thermoelectric power plant and the combined heat & power plant'. The results are as follows. In the case of NIR, the VS was slightly changed at the early stage of the material preheating period and the constant drying rate period with low moisture evaporation. But VS reduction was shown higher as moisture was dried. In the case of non-digested sludge with high VS content, the VS reduction rate by drying was shown lower than that of digested sludge. As the flocculant injection rate increased, the VS loss due th drying was found to be small. Also, the higher the flocculant injection rate was the longer the drying time. Especially, in the case of the NIR drying equipment, as the moisture content of sewage sludge decreased(moisture content 20~40%), the loss of net VS also showed a tendency to increase sharply. It is shown that the high calorific value according to the drying time of the non-digested sludge was changed from 590 kcaℓ/kg to 3,005 kcaℓ/kg and from 539 kcaℓ/kg to 2,796 kcaℓ/kg.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.92-99
• /
• 2021

CaO-based by-products composed of CaO, SO3, Al2O3, etc. are generally used as raw materials for CaO compounds. When applied to the recovered water of ready-mixed concrete, the hydration reaction of the powder material is accelerated and concrete performance can be improved. In this study, activated sludge was prepared to apply to the recovered water of ready-mixed concrete by mixing CaO-based hot-rolled slag(C12A7) in the recycling water of ready-m ixed concrete. Cem ent paste setting time and mortar compressive strength performance tests confirmed the effect on the hydration reaction. Therefore, the possibility of concrete application using activated sludge was confirmed.

• Resources Recycling
• /
• v.33 no.4
• /
• pp.22-28
• /
• 2024

Waste PCBs contain a large amount of valuable resources, including copper, and technology to recover them is constantly being developed. Generally, to recycle waste PCBs, a physical pretreatment process such as shredding and crushing is required. However, during this stage, the loss rate of metals is high and the sorting efficiency is low, indicating a need for a more efficient recycling pretreatment process. In this study, a high-temperature milling process, which simultaneously employs heat treatment and ball milling, was utilized to efficiently recover copper from waste PCBs. An experiment was conducted at 350 ℃ with milling time, milling speed, and the weight of the balls as variables. The results showed a copper recovery rate of over 90% under the conditions of a ball weight of 500 g, a milling speed of 70 RPM, and a milling time of 5 hours. The purity of the recovered copper was approximately 93%, and through post-processing after the high-temperature milling process, the feasibility of reusing the recovered copper as a high-purity material was confirmed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.142-147
• /
• 1998

Rotary bending fatigue tests were carried out on the nitrided titanium in order to investigate the effect of nitriding layer on fatigue limit. Main results obtained are as follows. (1) The fatigue limit of nitrided pure titanium is remarkably reduced because of enlargement of grain size at high heat treating temperature and high stress field created from the elastic interaction in the compound layer. (2) Further test using specimen which was removed nitrified layer gradually, were also conducted and it was found that by removing the compound layer the fatigue limit recovered as the level of basic material and rather increased by coming of a diffusion layer. Therefore it is concluded that the surface compound layer generated by nitriding treatment reduced the fatigue limit but diffusion layer increased it.

• Korean System Dynamics Review
• /
• v.5 no.2
• /
• pp.89-123
• /
• 2004

Using materials recovered from the waste stream instead of virgin resources as a raw material in manufacturing has great environmental and economic benefits. However, there is lack of public interest in needs for integrated waste management and its relevant facilities, because of NIMBY syndrome, This article has proposed a system dynamics model for the study of the potential and systemic consequences of resource circulation management system(RCMS) policy for a Sudokwon landfill site in Korea. The results of the study indicate that the effects of RCMS are seen continuously to increase in term with both the community welfare level and the resource and energy level. Moreover the effects of RCMS appear sharply in the first half of the simulation period.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.80-89
• /
• 1997

Die sinking electrical discharge machining(EDM) was conducted for ceramic composite of 33 weight percent TiC based on AI$_{2}$O$_{3}$ ceramic matrix according to the change of current and duty factor(DF). Material removal rate(MRR) was increased as the current and the duty factor increased, but better surface mor-pholoty was obtained in the region of lower current and duty factor. From the scanning electron microscopy(SEM) photographs and the energy dispersive X-ray spectroscopy(EDX) of the EDMed surface, EDM trace formed by one discharge spark was analyzed. Although the bending strength after EDM was highly decreased, reliability obtained by weibull analysis was increased twice. The bending strength was recovered or more by barrel polishing after EDM. From the FEM analysis of temperature for one spark, the possible melting region of AI$_{2}$O$_{3}$and TiC was obtained.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.4
• /
• pp.12-17
• /
• 1987

To extract arabinogalactan from larch (Larix Leptolepis), chips immersed with water(20-$90^{\circ}C$) for 1hr, were defiberized by refiner. The liquors were recovered and purified to pure arabinogalactan by ion exchange resin(IRC-50 a. IR-45) or MgO. Additionally the optimal condition in purification with MgO was also investigated. 1. The amounts of solids(crude sugars) and pure arabinogalctan in solids are 8.6-11.3% and 7.3-8.5%(raw material = 100), respectively. 2. Phenolic materials in crude sugars are removed up to 96-89% by ion exchange resin and 94-88% by MgO, while recovery yields of pure arabinogalactan are 81-75% on purification with ion exchange resin and 91-87% on purification with MgO. 3. The optimal conditions of purification with MgO are the addition of 35mg MgO/0.5g of crude sugars, 45 minutes at $70^{\circ}C$, or 25 mg MgO, 30 minutes at $85^{\circ}C$.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.5
• /
• pp.214-220
• /
• 2005

The ferroelectric properties of the $Pt/PZT(Pb(Zr,Ti)O_3)/Pt$ capacitors are severely degraded when they are annealed in hydrogen-containing environment. Hydrogen atoms created by the catalytic reaction of Pt top electrode during annealing in hydrogen ambient penetrate into PZT films and generate oxygen vacancies by the reduction of the PZT films, which is likely to cause the degradation. The degree of hydrogen-induced degradation and the direction of voltage shift in P-E curves of the pre-poled PZT capacitors after annealing in hydrogen ambient is dependent on the polarity of the pre-poling voltage. This implies that oxygen vacancies causing hydrogen induced degradation are generated by hydrogen ions having a polarity. The degraded ferroelectricity of the PZT capacitors can be effectively recovered by the shift of oxygen vacancies toward the Pt top electrode interface during post-annealing in oxygen environment with applying negative unipolar stressing.